Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
34231 commits 17 branches 142 tags 291 MiB
Commit graph

19 commits

Author SHA1 Message Date
Solomon Peachy
88cae9d13d Coldfire: Don't clobber alwarm wakeup signal in dualboot mode 
(See FS#7814 for details)

Change-Id: I6a09a8dfe1abc3a396ca8afe1dbbf1d203c7e3e2
 2019-01-01 23:30:44 -05:00
Marcin Bukat
b31c856b84 coldfire: Implement HAVE_INIT_ATTR magic 
This reclaims ~6kB of ram.

Change-Id: Iafdc661b1cf4445669c08c79205043792b8d14c3
Reviewed-on: http://gerrit.rockbox.org/718
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
 2014-01-17 19:03:06 +01:00
Jens Arnold
91ce4b2a60 Optional dual-boot support in iAudio X5 and M5 bootloader, based on FS#5289. 
In order to enable it, #define HAVE_DUALBOOT when building the bootloader.
Do not use the automatically created x5_fw.bin or m5_fw.bin, but use mkboot
to create a new firmware file from an OF x5_fw.bin resp. m5_fw.bin and
bootloader.bin.

The dual-boot bootloader boots the OF when pressing Play (main or remote) for
more than 3 seconds. Hold it a bit longer because the OF also checks buttons.
Short press boots rockbox.

As a bonus, the Play button read (for hold check) is done a bit earlier for
single-boot mode as well.



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30018 a1c6a512-1295-4272-9138-f99709370657
 2011-06-19 17:23:18 +00:00
Andree Buschmann
5d849a963e Clean up multiple definitions of RAM size. Remove -DMEM (make) and MEM (code), use the already defined MEMORYSIZE instead. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29189 a1c6a512-1295-4272-9138-f99709370657
 2011-02-02 17:43:32 +00:00
Marcin Bukat
aa2abed587 MPIO - drop wait states for LCD access 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28706 a1c6a512-1295-4272-9138-f99709370657
 2010-11-29 13:28:22 +00:00
Marcin Bukat
9a24892e2e MPIO HD300 - initial commit 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28680 a1c6a512-1295-4272-9138-f99709370657
 2010-11-26 23:28:08 +00:00
Marcin Bukat
c35eea508f MPIO HD200 - revert change in crt0.S introduced in r28270 to get rid of strange noise produced by buttons on startup 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28325 a1c6a512-1295-4272-9138-f99709370657
 2010-10-22 12:12:24 +00:00
Marcin Bukat
d793a971d8 HD200 - GPIO57 is headphone output enable. Proper handling of this line fixes hissing noise after startup. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28270 a1c6a512-1295-4272-9138-f99709370657
 2010-10-13 20:35:58 +00:00
Marcin Bukat
b09d3aec39 Add MPIO HD200 port - changed files 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25724 a1c6a512-1295-4272-9138-f99709370657
 2010-04-26 21:40:00 +00:00
Michael Sevakis
ec67912b63 Reclaim .iram areas in DRAM by overlapping their load addresses with the uninitialized data sections. I did what I could test out-- not any flash image linker scripts or other target processors. Move any .iram copies in crt0.S's to be the first operation even if not _strictly_ necessary to be emphatic (aka. 'beware'). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20061 a1c6a512-1295-4272-9138-f99709370657
 2009-02-20 02:33:40 +00:00
Daniel Stenberg
2acc0ac542 Updated our source code header to explicitly mention that we are GPL v2 or 
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
 2008-06-28 18:10:04 +00:00
Jens Arnold
769fcbd4d9 More iAudio M3 work. Bootloader compiles, but doesn't work yet. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
 2008-03-12 20:35:42 +00:00
Jens Arnold
41c1f17296 Fix a few comments. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16434 a1c6a512-1295-4272-9138-f99709370657
 2008-02-27 18:50:54 +00:00
Jens Arnold
3674af6441 Coldfire: Partially revert buffered writes, and enable them explicitly for the LCD only. Turned out that with buffered writes enabled, reads after writes are not always serialized, which is a bad thing for I/O. Buffered writes to the LCD are safe because that's write-only. Fixes FS #7985. How come I didn't notice this earlier? :> 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15173 a1c6a512-1295-4272-9138-f99709370657
 2007-10-17 20:45:13 +00:00
Jens Arnold
b85b6be3aa Coldfire targets: enable buffered writes by default. Speeds up all sorts of I/O that writes to ports: LCD update (except the functions using DMA on H300), ATA writes, .... Some timings had to be adjusted for the new configuration. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15129 a1c6a512-1295-4272-9138-f99709370657
 2007-10-15 21:16:50 +00:00
Jonathan Gordon
1083de8e7d CONFIG_USBOTG fixes 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12377 a1c6a512-1295-4272-9138-f99709370657
 2007-02-18 01:17:06 +00:00
Miika Pekkarinen
0ea4d3197e Prepare core support for the iriver bootloader supporting ROM images 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11991 a1c6a512-1295-4272-9138-f99709370657
 2007-01-12 18:34:00 +00:00
Jens Arnold
81f76f21d6 Fix some comments, and make code consistent with comments (CSMR2 was set to 1M instead of 64K). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11698 a1c6a512-1295-4272-9138-f99709370657
 2006-12-09 11:36:40 +00:00
Daniel Ankers
41997d3d89 Clean up crt0.S and move it to the target tree 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10830 a1c6a512-1295-4272-9138-f99709370657
 2006-08-31 19:45:05 +00:00