The freescale firmware partitions has a lots of quirks that
need to be dealt with, so do it the proper way.
Change-Id: I8a5bd3fb462a4df143bc6c931057f3ffedd4b3d3
The icoll code now has an IRQ storm detection mechanism which
will prevent the device from hard freezing in case it happen.
Change-Id: I9861238dce61d29af1e48f9c534ec63a7f23465c
I successfully identified the STC/RDS pin as B2P27.
Strangely the OF uses polling instead of interrupts
but since they routed it, let's use it! On the fuze+
the fmradio i2c uses bit toggling so we can't read
the RDS data in the interrupt context. Instead we
defer the work to a thread.
Change-Id: Iedfa425320e6c91b4351b72e97c732696bdb2b73
Reviewed-on: http://gerrit.rockbox.org/236
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Past development has proved that one can mistakely use
the same pin for two uses without noticing. Since this
causes extremely hard to find bugs, the infrastructure
will allow to register pin uses and panic when a conflict
is detected. The pinctrl debug now shows the pin uses
when its support is compiled in.
Change-Id: Idb2d5235ce09207d77aa474d6f158e72b933761a
It was only needed by the old arm toolchain that we no longer use or support.
Change-Id: Id0e6c67477f8834a637079b03cde5fbf9da68b1c
Reviewed-on: http://gerrit.rockbox.org/233
Reviewed-by: Nils Wallménius <nils@rockbox.org>
Player-specific code remaining: usb_drv_(init,exit)
The iPods lack a MMU, so:
- physical, virtual, and uncached addresses are identical
- since we can't access uncached memory we discard caches when receiving data
Still not quite reliable on nano2g
Change-Id: Iebb79df64818b9ae3b68eccb8be8975ebd6c21ea
- Add BUTTON_POWER.
- hm60x: Rename BUTTON_PLAY to more proper BUTTON_SELECT, which will make it
possible to unify hm60x and hm801 keymaps in some plugins.
Change-Id: I84715cdbc79d00c1bc2e8e6bd492159ad3c3422b
Remove the implementations of all exceptions handlers from the
various crt0.S files and have a single implementation in system-arm.h
The new implementation is weak so that it can be overwritten by some
specific code (like the unwinder)
Change-Id: Ib3e041ed6037376bbe0e79286057e1051640dd90
Reviewed-on: http://gerrit.rockbox.org/205
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
This patch implements HAVE_ADJUSTABLE_CPU_FREQ, it modifies the
following parameters when CPU is unboosted:
- s5l8702 voltage is decreased: 1.200V -> 1.050V
- CPU frequency is divided by 4: 216MHz -> 54MHz
- AHB frequency is divided by 2: 108MHz -> 54MHz
Change-Id: I2285b83efb7e1567864ac288f2d4ba55f058f7c5
Configures GPIO ports to detect holdswitch status instead of
polling the PMU via I2C, this fixes some random crashes
Change-Id: I407c9ca4c2c9203842f9e774b1c8d0455d59048c
Reviewed-on: http://gerrit.rockbox.org/194
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
For now it contains explicit SDRAM setup, cutting clock for unused
modules and turning off unused PLLs. This improves slightly mem
throughput as well as saves quite a bit of power.
Change-Id: I19a2827ac90a6868856c676fbe1e051c42f0d608
Rework code to be more useful:
- move battery channel init to lradc
- always init lradc from system (previously from adc)
- don't reserve channels for vddio, nmos or pmos
- implement external temperature sensing using current source
- use this for battery sensing on the Fuze+ (calibration needed)
Change-Id: I5f9a24b9243db7d1e6bdb16b84bc891e61d0c318
imx233: always divide physical channels by two for wider range
The Fuze+ OF monitors channel 2 but I'm unable to determine the meaning of it.
Print the value on the debug menu so that people can have a look at it.
Change-Id: I8a942febeafbce06014178abda12e38a16c26664
Only enable fmradio_i2c once with _init() called from system.
Move actual i2c init to system for consistency.
Move tuner power pin setup to power instead of fmradio.
Change-Id: Idb56bfba5803f71b5d049f174c48d2afb969a6ea
iomux_lcd now has parameter for display bit mode settings, so we doesn't need ifdef here.
lcd_init_device moved to target specific code
lcdif_init configure pins and lcd cotroller
Change-Id: I3a2d7fd38b08fe3bc5ebefa8c9f7288c21f58212
Reviewed-on: http://gerrit.rockbox.org/153
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
Tested-by: Marcin Bukat <marcin.bukat@gmail.com>
Yeah, sizeof (void) here with GCC is 1. If something has a problem
with that, we'll set it straight.
Change-Id: I9ad3eee75dd440f6404a04a501d1533c8bc18ba9
It proved the system work as unintended, even if slightly prematurely.
It was almost ready anyway.
Change-Id: Ic4de2b925bd26b094eaf65a120591569923954d1
Additional status callback is added to pcm_play/rec_data instead of
using a special function to set it. Status includes DMA error
reporting to the status callback. Playback and recording callback
become more alike except playback uses "const void **addr" (because
the data should not be altered) and recording uses "void **addr".
"const" is put in place throughout where appropriate.
Most changes are fairly trivial. One that should be checked in
particular because it isn't so much is telechips, if anyone cares to
bother. PP5002 is not so trivial either but that tested as working.
Change-Id: I4928d69b3b3be7fb93e259f81635232df9bd1df2
Reviewed-on: http://gerrit.rockbox.org/166
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
Change all lcd drivers to using a pointer to the static framebuffer
instead of directly accessing the static array. This will let us
later do fun things like dynamic framebuffer sizes (RaaA) or
ability to use different buffers for different layers (dynamic
skin backdrops!)
Change-Id: I0a4d58a9d7b55e6c932131b929e5d4c9f9414b06
Fixes swapped left and right channels on ipod 6g and changes the
i2s config to send samples as 16 bits instead of 16 zero padded to
24 bits to the dac.
Change-Id: Icfecfdf0f6868bdb01c11dced604ebfceb874aa1
Signed-off-by: Nils Wallménius <nils@rockbox.org>
GPIOA pin 1 used for USB DAC. This configures IO mux for using
GPIOA 0-4 pins instead of lcd data16-18,20,22, which are not needed,
because hifiman's lcd works in 16bit mode.
Change-Id: I47fe72abee56aebc56ef1c4c8a07a93698dcaa49
Simplified stack unwinder for ARM. This is port of
http://www.mcternan.me.uk/ArmStackUnwinding/
backtrace() is called from UIE() on native targets
and from panicf() on both native and ARM RaaA.
Change-Id: I8e4b3c02490dd60b30aa372fe842d193b8929ce0
- PCM playback DMA doesn't need the discard. Only recording DMA would
need it.
- When creating threads for another core, the core creating the thread only
needs to commit. The discard on the other core is handled elsewhere.
Change-Id: I864a0777e22f221a66218efd2c02ff3ad3889736
The headphone volume register value reads differently in Line1 and DAC mode.
Since the volume is not set again when switching between playback and radio,
we need to remember the hp volume and reapply setting when changing the mode.
Change-Id: I8fbd344f78653c19d81a39dd3f680ec6885cb1ec
We neet to setup the XPD to work as GPIO
storage unaffected
Tested on working-already Clipv2 and on a 'brickable' clipv2
Change-Id: Idcbdfb6bd50d51b7f6f7e00b21df24fac9b3a6d8
Now lcd_framebuffer is the only framebuffer in the system. We still use a ARM-buffered buffer
which serve as an intermediate buffer for copying, to accomodate the requirement of the controller.
We implement lcd_update_rect() properly using this new scheme (this requires two little quirks),
this allows to implement lcd_blit_yuv with the right semantic (bypasses the framebuffer). YUV to RGB
conversion is still done in software but the DCP CSC should be able to do that but the hardware rotation
scheme is not the same as our software so it will require some tricks.
Change-Id: I0752e9c2f1a705d2e6a6010084e1f150965d8370
This dir is suitable for stuff that doesn't fit the target tree, e.g. because
it also builds on hosted or otherwise. It also has a generic subfolder for
fallback C implementations so that not all archs need to provide asm files.
SOURCES should only contain "foo.c" where foo.c includes the specific
<arch>/foo.c files from the subdirs using the preprocessor. This way automatic
selection of asm versions or generic C verion is possible.
For the start, the thread support files are moved, since ASM threads can
be used on hosted platforms as well. Since core_sleep() remains platform
specific it's moved to the corresponding system.h headers.
Change-Id: Iebff272f3407a6eaafeb7656ceb0ae9eca3f7cb9
Core, codecs and plugins link it separately so this gets rid of SOURCES trickery.
Don't build it for hosted targets.
Change-Id: If15ef90e93cd218a4352ae8e89eea95d3122452f
Mostly for the sake of reducing latency for audio servicing where other service
routines can take a long time to complete, leading to occasional drops of a
few samples, especially in recording, where they are fairly frequent.
One mystery that remains is GPIOA IRQ being interrupted causes strange
undefined instruction exceptions, most easily produced on my Fuze V2 with a
scrollwheel. Making GPIOA the top ISR for now, thus not interruptible, cures it.
SVC mode is used during the actual calls. Hopefully the SVC stack size is
sufficient. Prologue and epilogue code only uses the IRQ stack and is large
enough.
Any routine code that should not be interrupted should disable IRQ itself from
here on in.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31642 a1c6a512-1295-4272-9138-f99709370657
move prototypes to ascodec.h
move code to ascodec*.c
YPR0: use adc-as3514.c instead of duplicating it
TODO: merge as3514.h and ascodec.h ?
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31626 a1c6a512-1295-4272-9138-f99709370657
move adc_close() prototype to adc.h
don't duplicate prototypes of adc.h
remove license header and guards for a single include of another file or for empty content
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31623 a1c6a512-1295-4272-9138-f99709370657
implement button_init_device for ondio
include button.h to get prototypes
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31621 a1c6a512-1295-4272-9138-f99709370657
Only target-specific (list of SPI targets) go in spi-target.h
API go into spi.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31615 a1c6a512-1295-4272-9138-f99709370657
FreeBSD apparently sends a SET_ADDRESS first, which confused our code.
This patch fixes that, and also simplifies the connection handling a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31582 a1c6a512-1295-4272-9138-f99709370657
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
Enabled a PMIC event where it should be disabled. Used constant from wrong enum
to get sense bits (??) which messed up main charger detection.
Also remove an obsolete struct declaration.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31536 a1c6a512-1295-4272-9138-f99709370657
