HiFi E.T. MA8 is almost the same as MA9 except
another DAC(pcm1792 in ma8, df1704 in ma9).
MA8 has ILI9342 lcd, MA8C has ILI9342C lcd.
Change-Id: If2ac04f5a3382590b2a392c46286559f54b2ed6a
The only difference between this target and HiFi E.T. MA9
is display driver (ILI9342 in MA9 and ILI9342c in MA9C)
Change-Id: Icc3d2490f850902a653175360f12283f3708bbb7
button_read_device() could be called before pca9555_read_thread
intializes pca9555_in_ports variable, and return incorrect value.
Change-Id: I960bff72fe230c9d0256b20e92d0a75e67266038
The previous code disabled the irq when there were fired. This seems
unreliable for some mysterious reason. Instead simply disable them
before enabling the irq.
Change-Id: I7ee1aa25dbc41c7dd53aa7c7744aa5e4d70ff2d8
Reviewed-on: http://gerrit.rockbox.org/640
Reviewed-by: benjamin brown <foolshperson@gmail.com>
Tested-by: benjamin brown <foolshperson@gmail.com>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
The code was broken in two ways:
- it called storage_read_sectors with a wrong drive number
- calling storage_read_sectors too early at boot time will fail because
we are in the init function, so the drive is not yet registered.
To fix this, use a user provided read callback instead of storage read
functions.
Change-Id: I5ab79d48391fae619d5f8ae09c3d499fc43854c8
Actually 0x20 is the right address, the 0x22 applies to the meizu which
probably use a Chinese clone with a non-spec compliant address.
Change-Id: I65b9ab6477c07a2293226536db3e696d34d3bc2c
The setting is currently unused but it provides some documentation and basic
support for a more comprehensive implementation of read-only support.
Change-Id: I353c33ef765ef6e6c09d59e943da6654a311ad84
The exact combination on which recording is needed is too complicated, so
just always cancel the unused warning, the compiler will optimise it away.
Change-Id: I0946586e4b01769c98babc4616f893c38f44c05f
The new code can select among several types of window (user, system, ...).
Furthermore, the type of partitions to use is selectable in config file.
Currently, two types are support: Freescale style MBR and Creative MBLK
Change-Id: I969d60a3d08f2c9448fb4b9c440051b7801b94cd
Currently we only support the BGA169 but if by chance Rockbox was to run on
a lqfp package for example, some pins may becomes unavailable or different.
Change-Id: I5c0d8d57ae31604572af37e0c2edd0bd7bda73a3
The old was doing register read/writes without calling tuner_power(), this
is broken for target with real tuner power management.
Change-Id: I5e60234697a8b91de6189daf6a10e871d5119b65
They share most of registers (except test and some extra bits), since our
driver is very basic, it is safe to relax the manufacurer & chip id check.
Change-Id: If54e8b9e0d852cd9128d5e28ff59bd2c7a55d98d
When bootloader is too intelligent, like on Creative devices, it might leave
some unexpected IRQs sources on, this is problematic when those sources share
the same IRQ line.
Change-Id: Ie9333918eb1048b1f2de4ea738cddf556aa75ee2
The STMP3700 has unreliable vbusvalid irq so we need to use
vdd5gtvddio. Therefore, using the vbusvalid bit produces
inconsistent results between events and detect. Fix that
by making power handle all the usb detect stuff.
Change-Id: Ic521b2f6677602e184fe46352c5359f4b4ba8d56
These functions are mostly used by the radio drivers and any blocking
call could potentially block the entire UI, which is pretty bad.
Since any request is expected to finish within a few us, having a 10ms
timeout doesn't seem unreasonable.
Change-Id: I03b19729511547e5bbdeb3476d020e5d87d0d7e1
On targets like stmp3700, resetting the dma channel on "soft" timeout
drives the whole block crazy unless it goes through complete reset.
Change-Id: I830b252279989bf9f9cd9c138240a6ea9b003527
Disabling these two settings makes the image small enough to build again.
This build has been broken for long enough without any better solution
actually being worked on, so I think this is much better than nothing.
Change-Id: I77c34c1e714fb6e132ed0ce39f0917779efe1125
Enable simulator for the target ypr0 to
be built and used.
Change-Id: I1b080f07ab90f5c4856881d08ad70e1053bbb0c0
Reviewed-on: http://gerrit.rockbox.org/618
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
This adds the support for hosted or other
particular platforms, where the "root" ("home")
path is NOT "/" (or "").
The change affects screendump in particular.
Change-Id: I4c218d102fe12cc782aedb99d456e9f72679ea07
Reviewed-on: http://gerrit.rockbox.org/613
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
The driver can now handle HOLD in several ways, including using a GPIO.
Also add a debug routine to read the raw value of the adc.
Change-Id: Ide2cb1ac58e759b4bc464e606b432f2c150ee36f
Many imx233 targets boot in a very low performance mode, typically cpu and
dram at 24MHz. This results in very slow boots and very unstable USB
bootloader mode. Since cpu frequency scaling is disabled in bootloader in
rockbox, always make the frequency scaling code available and boost at boot
time.
Change-Id: Ie96623c00f7c4cd9a377b84dcb14b772558cfa4d
Even with volume at minimal fuze+ was still playing sound pretty loud.
this fix it.
Change-Id: I5b18e9c39ced240eebb0457c433b0ca150668860
Reviewed-on: http://gerrit.rockbox.org/621
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
This one is a bit strange: our codebase just don't use it if there is both
SD and MMC, so this missing function got unnoticed so far.
Change-Id: Ifea4bb5140477b7637d033737594259cc44fb10e
