Add dma_retain() and dma_release() to reference count the users
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19344 a1c6a512-1295-4272-9138-f99709370657
Correct the logic when enabling interrupt line (multivolume)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19337 a1c6a512-1295-4272-9138-f99709370657
* Adds a callback to be called on end of transfer
* Add a function to disable a channel
* Services the 2 channels if both are active in the isr
SD driver: panics on error
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19333 a1c6a512-1295-4272-9138-f99709370657
Reorder system_init() to initialize peripherals not only in bootloader
Use a 65MHz PCLK (and memclk) which will be needed for realtime decoding
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19330 a1c6a512-1295-4272-9138-f99709370657
- Make write_sectors() function fail.
- Disable interrupts while transferring data and do not yield(), so we are sure the FIFO is not overflowed
Note this solution is only temporary since it's not friendly to other threads and confuse kernel tick precision
This will be reverted when we will be using DMA to access the SD card, but for now it permits further development
- PL180: Rename the MMC_* registers into MCI_*, to not make people believe it is a MMC only controller
- Supports non aligned destination buffers when reading
- Correct the timeout units which were lamely copied from ata-sd-pp.c and were in milliseconds (note that the timeouts are disabled now)
- Higher a bit the stack size
- Use the full initialization procedure in the bootloader and the loaded firmware
- Use the CCU_IO register only when a SD slot is present
- Put some panicf() around to catch problems
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19122 a1c6a512-1295-4272-9138-f99709370657
Implement some of the new functions
Use as3514 rtc
Add AS3525 case in rolo.c
Copy card_get_info_target() from ata-sd-pp.c , and use the correct 32bits words order
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19064 a1c6a512-1295-4272-9138-f99709370657
Adds read-only SD driver, largely copied from ata-sd-pp.c
Only tested on the embedded SD, on the Clip
First steps to build a Normal firmware
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19045 a1c6a512-1295-4272-9138-f99709370657
Don't reset the peripherals
Don't mind about the spare register
Don't mind about MEMSTICK peripheral
Use correct clock speeds for IDE
Tested on Clip only
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19036 a1c6a512-1295-4272-9138-f99709370657
Rewrite a new header distributed under GPLv2 or later, and place it in
export/ in case other targets ship with an ARM PL180 controller
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18959 a1c6a512-1295-4272-9138-f99709370657
Declare a structure constant
Fix a comment (wrong bit number)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18946 a1c6a512-1295-4272-9138-f99709370657
