They did not compile anymore after the register hearder rework. This change
only fixes the syntax, the generated binaries are exactly identical.
Change-Id: Iec2347aa3deb1ddfe2ca36f0db1e481c4e2d329c
This clearly fixes recording on targets where the bias pin was wrong. It may
also improve recording on targets where the bias voltage was wrong. I was unable
to find those parameters on the ZEN Mozaic, which fallback to default values.
Change-Id: Ifb5f823c9cbd01f0d9a80fa5d49d93972c8b7cfe
For some reason, there was a mismatch between the setting (decibel) and the
audiohw code (centicel). This resulted in a gain divided by 10. This may
explain why some people experienced low volume with the mic on the fuze+.
Change-Id: I138ac18dd93c36f43a7dfce735efc826405c598c
The codec wasn't calling ci->set_offset() while decoding; as a result,
the saved offset in ci.id3->offset was only updated at the start of the
file and when seeking.
To reproduce the problem in the simulator or on a real device:
- Start playing an Opus file.
- Let it play until 15s, then turn the player off.
- Turn back on and resume playback. This'll resume correctly from 15s
(using time-based resume, I think, as the offset was 0?).
- Let it play until 30s, then turn the player off again.
- Turn back on and resume playback. This'll resume from 15s, based on
the initial position from last time, when it should resume from 30s.
I believe this will also fix FS#12799 ("Resuming opus file from bookmark
is not working correctly").
Change-Id: Iba67368e0029c968ef802693767e0722719bc38b
There was a lot of copy and paste, and the code was just crap. This commit tries
to clarify the code and also document the encryption procedure. Hopefully I didn't
break anything.
Change-Id: I257793010e7cf94f2b090b30bb8608359d3886e3
Also clarity parts of the code. The old code suffered from two defects:
- it was very unclear because it made changes to whole registers
(using as3514_write) instead of fields (using as3514_set/clear/write_masked).
Also the routing code was spread accross several functions which made it hard to
follow.
- it did not properly reroute audio on monitor changes. In particular, the following
could happen: when switching from DAC to radio, the code would fail to clear
SUM_off, resulting in a weird situation where the main mixer was off
(SUM_off) but the headphone where using the main mixer as input. Incredibly this
worked anyway (at least on AMSv2 and YP-R0) but resulted in strange volume gaps
between DAC and radio mode.
Change-Id: I7826835fdb59c21f6483b223883ca9289e85caca
Based on emCORE.
Low level functions that do not depend on Rockbox kernel,
intended to be used by the bootloader, dualboot-installer,
RB drivers or other .dfu tools.
Change-Id: I3c616ded42260c6626bda23b7e580791981df61d
Based on emCORE.
Low level functions that do not depend on Rockbox kernel,
intended to be used by the bootloader, dualboot-installer,
RB drivers or other .dfu tools.
Change-Id: Iad369627b55bf1778eab437424072f1a653e4db6
During the bootloader install/uninstall process, a signal
is emitted when "Abort" button is pressed, the installers
can attach this signal and cancel the process.
Change-Id: I7f297b8031d7a2d93da0022081aaef03ef041baf
Useful for targets that needs multi-stage uninstall. On current
targets (with Uninstall capability) the progress is updated to
100% when bootloader uninstall is successfully finished.
Change-Id: I61be1c4f5cfc2d2f35fa5005962be9703888447d
This allows to implement multi-stage uninstallers. Should not affect
the behaviour on current targets.
Change-Id: Idf8aec5caf76cf9317798890d094a7cebdbcabec
Newer toolchains (both gcc and libc related) add a lot of warnings.
While these can be useful and correct, cleaning them up woult be a
lot of work and isn't likely to actually happen any time soon.
Change-Id: I8c4e8cd3dc92f9afa4bf003c63ca65e895e3ef00
- Some rewrite with the intent to get ride of these random errors
appearing on some builds/devices (not much noticeable on RB but
can ruin bootloader builds).
- Error handling (ACK).
- IIC clock increased to be the same as in OF.
Change-Id: Idf8cfa3c230a0a61ec9c879bf6f0ea8b061a4607
Add code to read USB D+/D- and accessory ADCs, it is shown in HW
debug menu, might be useful in future for RB and/or the bootloader
to identify external USB chargers.
Change-Id: Ia48ca5e06bb7ddc52bb55abedde6734653ce8dba
