The JZ misc allows to enable and test SRAM.
The XBurst code uses the coprocessor interface to analyse the cpu. It also
provides a test platform for various features like EBASE and exceptions.
I was able to test and confirm that on jz4760b (thus xburst), EBASE works
(but top 2 bits are not controllable and always 01). The processor claims
to support vector interrupts but this is untested. The values in ConfigX
are not to be trusted blindly, clearly some are wrong. I tried to use the
JZ4780 Config7 "ebase gate" to change bit 30 of EBASE but it does not work,
which suggests that JZ480 uses a newer version of XBurst. Detailled log below:
> ./hwstub_shell -q -f lua/xburst.lua -e "XBURST.init()"
[...]
XBurst:
PRId: 0x2ed0024f
CPU: JZ4760(B)
Config: 0x80000483
Architecture Type: MIPS32
Architecture Level: Release 2 (or more)
MMU Type: Standard TLB
Config1: 0x3e63318a
MMU Size: 32
ICache
Sets per way: 128
Ways: 4
Line size: 32
DCache
Sets per way: 128
Ways: 4
Line size: 32
FPU: no
Config2: 0x80000000
Config3: 0x20
Vectored interrupt: yes
Config7: 0x0
> ./hwstub_shell -q -e 'require("jz/misc"); JZ.misc.enable_sram()' \
-f lua/xburst.lua -e "XBURST.test_ebase(0x80000000);XBURST.test_ebase(0xb32d0000)
[...]
Testing EBASE...
Disable BEV
SR value: 0x2000fc00
EBASE value: 0x80000000
Value after writing 0x80000000: 0x80000000
Value after writing 0x80040000: 0x80040000
Test result: EBase seems to work
Disable config7 gate: write 0x0 to Config7
Value after writing 0xfffff000: 0xbffff000
Enable config7 gate: write 0x80 to Config7
Value after writing 0xc0000000: 0x80000000
Config7 result: Config7 gate does not work
Exception test with EBASE at 0x80000000...
Writing instructions to memory
Old SR: 0x2000fc00
New SR: 0xfc00
EBASE: 80000000
Before: cafebabe
After: deadbeef
Exception result: Exception and EBASE are working
Testing EBASE...
Disable BEV
SR value: 0x2000fc00
EBASE value: 0x80000000
Value after writing 0x80000000: 0x80000000
Value after writing 0x80040000: 0x80040000
Test result: EBase seems to work
Disable config7 gate: write 0x0 to Config7
Value after writing 0xfffff000: 0xbffff000
Enable config7 gate: write 0x80 to Config7
Value after writing 0xc0000000: 0x80000000
Config7 result: Config7 gate does not work
Exception test with EBASE at 0xb32d0000...
Writing instructions to memory
Old SR: 0x2000fc00
New SR: 0xfc00
EBASE: b32d0000
Before: cafebabe
After: deadbeef
Exception result: Exception and EBASE are working
Change-Id: I894227981a141a8c14419b36ed9f519baf145ad1
These macros are like jz_setf but instead of writing fields, they write a
raw value directly: jz_set(REG, value) and jz_clr(REG, value).
Change-Id: I660f20dd691b26d367533877875fc3226a26c992
Apparently I completely forgot to implement it so using hwstub over net would
just fail all EXEC commands :-s
Change-Id: I0d0506cbbce9b86c9a4f19036dacc922d1e51338
This is needed on the jz4760b because if some data is loaded to DRAM, then it
is cached and a disaster lurks if dcaches/icache are not flushed. Targets that
needs this must define CONFIG_FLUSH_CACHES in target-config.h and implement
target_flush_caches(). Currently MIPS has some generic code for mips32r1 that
requires to define {D,I}CACHE_SIZE and {D,I}CACHE_LINE_SIZE in target-config.h
Change-Id: I5a3fc085de9445d8c8a2eb61ae4e2dc9bb6b4e8e
The stub is quite versatile: it can be loaded using bootrom or another other
means (like factory boot on Fiio X1). It relocates itself to TCSM0 and provides
basic functionality (it does not recover from failed read/writes at the moment).
Change-Id: Ib646a4b43fba9358d6f93f0f73a5c2e9bcd775a7
The jz code can do several useful things like dumping the IPL and SPL.
The Fiio code can play with backlight and has code do dump the IPL
and SPL with the correct parameters (extracted by reverse engineering).
Change-Id: I317b3174f5db8d38c9a56670c1d45565142ec208
This is a register description file for the JZ4760B. There are several
details worth noticing:
- it was obtained by gathering information from several sources/headers, but
since there are inconsistencies between them about the exact differences
between JZ4760 and JZ4760B, this file probably contains some errors
- the register names are not the same as the manual ones (which are not the
same as the one in the headers anyway): I dropped the "R" suffix on most
registers because it's redundant
- Ingenic likes to have read-only registers and then set/clr registers, with
very confusing names like DIR/DIRS/DIRC: in the file, the set/clr registers
are described as set/clr variants of the original register
- Parts of the description were obtained programmatically, which explains why
there are empty nodes or partially undocumented registers
Change-Id: I8da1d61e172e932e1a4a58ac0a5008f02b1751be
The code was not updated when I added support for list and other stuff, and thus
it did not properly sort by addresses.
Change-Id: Iaed0717b607beedfb2856c020c2a760e7a5667c5
The function is neither reentrant nor ISR callable. Instead of
using a ticked-based timeout, have the button driver provide the
unboost after a delay when waiting for a button.
HAVE_GUI_BOOST gets immediate boost after dequeuing any message,
otherwise the queue has to have at least three messages waiting
for it to trigger a boost-- essentially the behavior that existed
but now combined in one place.
Change-Id: I1d924702840f56a1a65abe41fa92b4e753c4e75a
FF_PROBE should leave nothing for caller to clean up whether
testing only the cache or permitting disk access. Less to worry
about.
Change-Id: Iea5aa3c1ae7f9025a9de528b127f08e490154048
Selective backlight allows the user to choose actions that will not
enable the backlight when pressed.
Advanced softlock allows user to choose actions that will not be
blocked by screenlock on devices without a hold button.
Both only occur in FM and WPS Contexts.
Update:
Back from the dead
-Cleaned up code, removed unnecessary calls, re-arranged last filter action
timeout conditional to work in case last_filtered_action_tick was never set
-Added entries to the manual
-Fixed back button on some menus not activating backlight
-Made menus more intuitive, no actions selected now changes menu item to off.
-Added talk fuctionality.
-Added option to disable selective backlight while on external power.
-Rewrote backlight and softlock handling code to fix issue with scrollwheels
-Menu changed to have toggle(yes/no) and settings
-Optimized selective actions lookup
-Added option to disable notification of 'buttons locked' while softlocked
-Removed uneeded code, consolidated action lookup to single function
-Fixed incorrect name on selective softlock menu
-Added option to disable touch on touchscreen devices
-Fixed backlight on original screenlock without selective screenlock active
-Added text selection in mask_select for when show_icons is off
-Fixed voice in mask_select to speak if voice is defined instead of spelling
-Added more lang defines (play skip seek)
-Added option to disable unknown keys turning on backlight
-Fixed Conditional argument In wrong place causing players without
backlight to fail to build
-Fixed Disable Unknown blocking detection of context change
-Fixed canceling menu didn't update new settings
-Added Autolock on backlight off
-Removed backlight_on_force from backlight.c, Now sets ignore next to false
and uses backlight_on
-Cleaned up autolock code added strings to lang file
-Fixed issue where rapid presses would bypass softlock
-Removed old softlock code, Cleaned selective actions code
-Changed menu to match existing RB menus
-Fixed Backlight_on_Hold blocked by backlight_ignore_next
-Fixed ignore_next for ipod
-Fixed bug allowing context with softlock to bypass selective backlight
-Changed mask_select to no longer prompt for changes to be saved
-Changed menu names
-Added ignore timeout to allow ipod scroll wheel to work properly and other
players to still work properly, removed some previous code including
ignore_event
-Increased ignore timeout to prevent sd card accesses from interrupting action
code and turning on backlight
-Changed Unknown action to unmapped action in menu, changed handling code
-Removed unneeded logic and variables for handling unfiltered actions
-Reverted unmapped action code to previous functionality
-Added manual entries (thanks JohnB)
-Removed elusive unhandled unicode character from manual, changed formatting slightly
Actions:
Volume,Play,Seek,Skip
Extras:
Disable unmapped actions
Disable selective backlight on external power
Disable touch during softlock on touchscreen devices
Disable softlock notifications (power button still notifies)
Autolock on backlight off
Method:
Adds a function to ignore backlight on next call
If selected action occurs backlight is forced on,
Filter_first_keypress stays intact.
Selective softlock allows selected actions through, bypasses the normal
softlock routine.
ToDo:
DONE
previous commit (#1) has attribution for folder_select.c which mask_select
is based from.
Change-Id: I08132ddcfd64c81751ef23b720f3ec6d68695fe4
Playlist dircache references should be back in working order.
Reenabling dircache references in the database ramcache is not
yet done as it requires quite a bit of rework. Otherwise, the
database in RAM is functional again.
Some buffer compatibility changes have been made for database
commit because the dircache buffer can no longer be stolen, only
freed by an API call.
Change-Id: Ib57c3e98cb23e798d4439e9da7ebd73826e733a4
The file system rework introduced incompatibility between dircache
and the tagcache ramcache and playlist dircache path caching. This
update makes changes to filesystem code to reintegrate all that.
It also fixes a couple bugs that were found when vetting all the
code. The filestream cache was being reset without regard to
the stream even if it was shared in write mode (made work of
.playlist_control). Better handling of unmounting gives files a
better go at force-closing them without risk to disk integrity.
Did some miscellaneous pedantic changes. Improved efficiency of
testing a file's existence (a little) since the path parser will
be shared between file code and parsing for the sake of finding
dircache references, not duplicated as before.
This commit doesn't reenable said items just for the sake of
keeping changes separate and related.
Plan for the next is to enable dircache again for the playlists
(easy peasy) and reenable tagcache ramcache but *without* the
dircache path caching because it's rather substantial to change
in itself. The ramcache will still function without dircache.
Change-Id: I7e2a9910b866251fa8333e1275f72fcfc8425d2d
It handles GPIO and PWM based LEDs, possibly with several channels (red-green
LED for example). The debug allows one to play with the setting.
Currently the code supports the ZEN, ZEN X-Fi, and ZEN Mozaic.
Change-Id: I8c3b66e6ba21778acdb123daabb724280a7d1a4f
The current implementation was custom and super slow. Since we use Crypto++
anyway, we might as well get use a good implementation.
Change-Id: I761ad7401653471e54000e1c2bc3d9882378112f
Instead of having our own copy of the AES code, use a good library to do that.
Crypto++ is well-maintained, supports a lot of ciphers, works on many OSes, and
is optimized for many architectures.
Change-Id: I7d7d24b47993206d7338c5f9bac8bbdd3915a667
It was a mess, a mix of crypto_* and cbc_mac calls. I made everything call crypto
functions, and also separate key setup from cryptographic operations, this will
be useful to speed up the code in the upcoming commits. Drop support for "usbotp"
key, since the crypto code for that was never mainlined and we can always get the
keys from a device as long as we have code execution (using the DCP debug registers).
Change-Id: I7aa24d12207ffb744225d1b9cc7cb1dc7281dd22
The overriding of the IV and real key should be the exception, there is no
need to manually set them to false.
Change-Id: Id66754f20a79aa5c1a991839345d1242e0aa587d
The old code had some annoying way of dealing with padding by adding explicit
instructions to the stream, which is 1) ugly 2) not in par with freescale
tools. The trick, which this new version implements, is to put the useful length
of the section in the section header, and the actual (with padding) length in
the boot tag. This way the tools can just ignore padding instruction by
reading the section header, and the bootloader can still load the image because
it uses the boot tags.
Also correctly handle the case where the first section does not start right
after the header (there is a bug in freescale tools for this case by the way).
There is an ambiguity in the way the padding instructions should be encrypted:
the bootloader should logically treat them as regular instruction of the section
stream, but it appears the freescale tools do not generate them as part of the
stream and instead encrypt them like boot tags, which is stupid because there
is no way the bootloader could decrypt them, and anyway we don't care because
the bootloader doesn't decrypt them at all.
Change-Id: Iabdc1d1f9f82d374779bf03efb75c2c3998f5b5d
Somehow it got hooked to simulator file functions when it should
be (and was) using raw OS functions.
Credit: Frank Gevaerts
Change-Id: Iac02fed1067830a432183632a047e00dfd03d3c2
The mingw linker uses strlen() in some cases, and codeclib.c redefines it, that
leads to mingw runtime init to call into our strlen() and then ci->strlen() which
of course crashes. Apply the same fix as for malloc and friends: rename the symbol.
The codeclib.h include is necessary for normal builds.
Change-Id: Ifa85901a3e4a31cc0e10b4b905df348a239d5c99
defined in mingw environments.
Renamed defines of UNALIGNED to ROCKBOX_UNALIGNED so that they don't
conflict with definitions in mingw32 cross-compiling environments
(defined in _mingw.h).
Change-Id: I369848c0f507e6bf5ff9ab4a60663bbbda6edc52
Fixes and Changes to configure the Windows simulator builds mostly for cygwin / mingw cross-compiling environments:
- fix CROSS_COMPILE values including detection for old and newer mingw
environments
- fix detection of sdl-config by searching inside CROSS_COMPILE
sys-root
- fix call of sdl-config and use correct (found) version
- add possibility to build a 64-bit simulator
- added several -Wno- options to GCCOPTS to prevent annoying compiler
warnings
- use cross-compiler as HOST_CC if no "native" HOST_CC is available
Change-Id: Ib5dd288c3f9a11be9b66e53e3406eadfa65f7604
