Either by mistake or because its meaning changed, usb_powered() doesn't mean
what the name suggest, so clarify its meaning by renaming it to usb_powered_only.
So use of usb_powered() are replaced by usb_inserted() when it makes more sense.
Change-Id: I112887e2d8560e84587bee5f55c826dde8c806d8
Reviewed-on: http://gerrit.rockbox.org/1097
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
This patch redoes the filesystem code from the FAT driver up to the
clipboard code in onplay.c.
Not every aspect of this is finished therefore it is still "WIP". I
don't wish to do too much at once (haha!). What is left to do is get
dircache back in the sim and find an implementation for the dircache
indicies in the tagcache and playlist code or do something else that
has the same benefit. Leaving these out for now does not make anything
unusable. All the basics are done.
Phone app code should probably get vetted (and app path handling
just plain rewritten as environment expansions); the SDL app and
Android run well.
Main things addressed:
1) Thread safety: There is none right now in the trunk code. Most of
what currently works is luck when multiple threads are involved or
multiple descriptors to the same file are open.
2) POSIX compliance: Many of the functions behave nothing like their
counterparts on a host system. This leads to inconsistent code or very
different behavior from native to hosted. One huge offender was
rename(). Going point by point would fill a book.
3) Actual running RAM usage: Many targets will use less RAM and less
stack space (some more RAM because I upped the number of cache buffers
for large memory). There's very little memory lying fallow in rarely-used
areas (see 'Key core changes' below). Also, all targets may open the same
number of directory streams whereas before those with less than 8MB RAM
were limited to 8, not 12 implying those targets will save slightly
less.
4) Performance: The test_disk plugin shows markedly improved performance,
particularly in the area of (uncached) directory scanning, due partly to
more optimal directory reading and to a better sector cache algorithm.
Uncached times tend to be better while there is a bit of a slowdown in
dircache due to it being a bit heavier of an implementation. It's not
noticeable by a human as far as I can say.
Key core changes:
1) Files and directories share core code and data structures.
2) The filesystem code knows which descriptors refer to same file.
This ensures that changes from one stream are appropriately reflected
in every open descriptor for that file (fileobj_mgr.c).
3) File and directory cache buffers are borrowed from the main sector
cache. This means that when they are not in use by a file, they are not
wasted, but used for the cache. Most of the time, only a few of them
are needed. It also means that adding more file and directory handles
is less expensive. All one must do in ensure a large enough cache to
borrow from.
4) Relative path components are supported and the namespace is unified.
It does not support full relative paths to an implied current directory;
what is does support is use of "." and "..". Adding the former would
not be very difficult. The namespace is unified in the sense that
volumes may be specified several times along with relative parts, e.g.:
"/<0>/foo/../../<1>/bar" :<=> "/<1>/bar".
5) Stack usage is down due to sharing of data, static allocation and
less duplication of strings on the stack. This requires more
serialization than I would like but since the number of threads is
limited to a low number, the tradoff in favor of the stack seems
reasonable.
6) Separates and heirarchicalizes (sic) the SIM and APP filesystem
code. SIM path and volume handling is just like the target. Some
aspects of the APP file code get more straightforward (e.g. no path
hashing is needed).
Dircache:
Deserves its own section. Dircache is new but pays homage to the old.
The old one was not compatible and so it, since it got redone, does
all the stuff it always should have done such as:
1) It may be update and used at any time during the build process.
No longer has one to wait for it to finish building to do basic file
management (create, remove, rename, etc.).
2) It does not need to be either fully scanned or completely disabled;
it can be incomplete (i.e. overfilled, missing paths), still be
of benefit and be correct.
3) Handles mounting and dismounting of individual volumes which means
a full rebuild is not needed just because you pop a new SD card in the
slot. Now, because it reuses its freed entry data, may rebuild only
that volume.
4) Much more fundamental to the file code. When it is built, it is
the keeper of the master file list whether enabled or not ("disabled"
is just a state of the cache). Its must always to ready to be started
and bind all streams opened prior to being enabled.
5) Maintains any short filenames in OEM format which means that it does
not need to be rebuilt when changing the default codepage.
Miscellaneous Compatibility:
1) Update any other code that would otherwise not work such as the
hotswap mounting code in various card drivers.
2) File management: Clipboard needed updating because of the behavioral
changes. Still needs a little more work on some finer points.
3) Remove now-obsolete functionality such as the mutex's "no preempt"
flag (which was only for the prior FAT driver).
4) struct dirinfo uses time_t rather than raw FAT directory entry
time fields. I plan to follow up on genericizing everything there
(i.e. no FAT attributes).
5) unicode.c needed some redoing so that the file code does not try
try to load codepages during a scan, which is actually a problem with
the current code. The default codepage, if any is required, is now
kept in RAM separarately (bufalloced) from codepages specified to
iso_decode() (which must not be bufalloced because the conversion
may be done by playback threads).
Brings with it some additional reusable core code:
1) Revised file functions: Reusable code that does things such as
safe path concatenation and parsing without buffer limitations or
data duplication. Variants that copy or alter the input path may be
based off these.
To do:
1) Put dircache functionality back in the sim. Treating it internally
as a different kind of file system seems the best approach at this
time.
2) Restore use of dircache indexes in the playlist and database or
something effectively the same. Since the cache doesn't have to be
complete in order to be used, not getting a hit on the cache doesn't
unambiguously say if the path exists or not.
Change-Id: Ia30f3082a136253e3a0eae0784e3091d138915c8
Reviewed-on: http://gerrit.rockbox.org/566
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
The external storage will be created during make install, as simext folder in
the build directory. Upon pressing the e key the sim will mount (virtually
) this into the root directory. It can be accessed in the same way as an
sd/mmc card on real targets. This requires quite some path trickery in io.c.
Change-Id: I2fa9070a3146101ec5655b5b4115ca349d1d4bf4
Part of this change is to align sdlapp builds to other application targets
in that the sim_* wrappers are not used anymore (except for sim_read/write).
Path mangling is now done in rbpaths.c as well.
Change-Id: I9726da73b50a83d9e1a1840288de16ec01ea029d
The virtual external storage can be inserted/extracted with the e key. This
has little effect because there is no way to access the storage (yet, a later
commit will change this). Except on ondio where the mmc needs to be
extracted before entering USB (like on real target).
Change-Id: I523402832f3b4ae71e0603b281aba4fb8592a897
CONFIG_STORAGE & STORAGE_HOSTFS allows to use parts of the storage_* API to be
compiled for application targets without compiling storage.c or performing
actually raw storage access. This is primarily to enable application targets to
implement HAVE_MULTIVOMULE/HAVE_HOTSWAP (in a later commit).
SIMULATOR uses the same mechanism without explicitely defining STORAGE_HOSTFS
(how to add a bit to an existing preprocessor token?).
Change-Id: Ib3f8ee0d5231e2ed21ff00842d51e32bc4fc7292
Enable simulator for the target ypr0 to
be built and used.
Change-Id: I1b080f07ab90f5c4856881d08ad70e1053bbb0c0
Reviewed-on: http://gerrit.rockbox.org/618
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
Target that have a touchpad/touchscreen should disable it while
being locked (In order to avoid LCD to drain battery power due to
"key locked" constant reporting messages. If they a have a keylock
button this was already handled at driver level. If not (e.g. fuze+),
they will have to implement a switch at driver level that action.c
can operate on softlock.
This patch does the following for any target having a touchpad
or a touchscreen and no HAS_BUTTON_HOLD (ie any softlock target)
1) it implements the code to call button_enable_touch(bool en) in
action.c.
2) button_enable_touch is implemented in button.c and call
either touchpad_enable or touchscreen_enable
3) those two function are implemented respectively in touchscreen.c
and a new touchpad.c file. They provide a generic way to silents touch's
device and call a function at driver level where target specific code
can be implemented if possible/needed (for power saving for instance).
Those function name are touchpad_enable_device and touchscreen_enable_device
4) we implement an empty function at driver level of targets that need it
to have them still being able to compiled.
Change-Id: I9ead78a25bd33466a8533f5b9f259b395cb5ce49
Reviewed-on: http://gerrit.rockbox.org/569
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
When using variadic macros there's no need for IF_MD2/IF_MV2 to deal
with function parameters. IF_MD/IF_MV are enough.
Throw in IF_MD_DRV/ID_MV_VOL that return the parameter if MD/MV, or 0
if not.
Change-Id: I7605e6039f3be19cb47110c84dcb3c5516f2c3eb
Ideally someone will go through and make a graphic for the 6G, but as it looks nearly identical to the Video its not a huge deal.
Change-Id: If507c6d4f01eb0b1e5fc2f15f6a0e5a3195006c6
It was also broken functionally, probably since a while.So restore the
functionality. Run it on the dap, the tcd files will be placed into .rockbox folder.
Change-Id: Id7a6ce4389dfaf99799258902be80d630af0601c
Refactor native/hosted implementation seperation while at it
(no wrappers starting with _ anymore).
Change-Id: If68ae89700443bb3be483c1cace3d6739409560a
1) Change the image with a clean one
2) add keymaps indication
Change-Id: I0d3fff317406809523fb34282df058fe2e074a2c
Reviewed-on: http://gerrit.rockbox.org/173
Reviewed-by: Peter D'Hoye <peter.dhoye@gmail.com>
Tested-by: Peter D'Hoye <peter.dhoye@gmail.com>
libs in $ROOT/lib now add to $(CORE_LIBS) and $(EXTRA_LIBS) and are
automatically linked by the core and codecs/plugins respectively.
Change-Id: Iff482c792a8c8142718f6a16a450c6e2f1497c9a
Use generic void * and size_t and make mp3_play_data and its callback
agree on types. Use mp3_play_callback_t instead of prototyping
right in the function call (so it's not so messy to look at). Change
doesn't appear to require plugin API version increment.
Change-Id: Idcab2740ee316a2beb6e0a87b8f4934d9d6b3dd8
* filesize() is not POSIX, so it doesn't need stubbing or redirecting
* make the various directory functions use the sim_ versions for PCTOOL
* PCTOOL needs generic byteswap functions
* fix the database makefile to not use -DSIMULATOR anymore
Change-Id: Ic6abc4f662830b85626c751a472fa4a03e844871
Simplified stack unwinder for ARM. This is port of
http://www.mcternan.me.uk/ArmStackUnwinding/
backtrace() is called from UIE() on native targets
and from panicf() on both native and ARM RaaA.
Change-Id: I8e4b3c02490dd60b30aa372fe842d193b8929ce0
A warning triggered by attribute warn_unused_result cannot be suppressed by
casting the result to void. Properly check the return value and pass it to the
caller.
Fix the check for the number of bytes written. The return value of fread is the
number of items written, not the number of bytes.
Change-Id: I8c60e23ac549e22fd3f7dd5c51c5a8e6fc517cb1
Also a bit of optimisation of battery_status_update().
FS#12506
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31635 a1c6a512-1295-4272-9138-f99709370657
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
This unfortunately removes the screendump feature, but usually there are better desktop apps for that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31011 a1c6a512-1295-4272-9138-f99709370657
Now all threads need to ack the connection like on real target, dircache is unloaded and playback stops accordingly.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31009 a1c6a512-1295-4272-9138-f99709370657
Only integer IDs are exposed from dircache with this. This way the cache is isolated from other modules.
This is needed for my buflib gsoc project.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30038 a1c6a512-1295-4272-9138-f99709370657
According to the mighty google, stat() will just return
an incorrect file size for files > 2 GB on cygwin.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29995 a1c6a512-1295-4272-9138-f99709370657
Actually add files to the dircache (as well as removing them) and
remove them only when they were found on disk. This matches the
native behavior and prevents the dircache from becoming uninitialized
when a previously created or nonexisting file is being removed. This
typically would happen during a database update.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29715 a1c6a512-1295-4272-9138-f99709370657
Make shutdown_hw() not return as it's supposed to, ensure sim_do_exit() is called from main thread and move sim_kernel_shutdown() into it to simplify things.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29455 a1c6a512-1295-4272-9138-f99709370657
This replaces SDL threads with real cooperative threads, which are less cpu intensive and allow priority scheduling.
The backend for context switching is dependant on the host (sigaltstack/longjmp on Unix, Fibers on Windows).
configure has options to force or disallow SDL threads.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29327 a1c6a512-1295-4272-9138-f99709370657
Do proper shutdown in RaaA builds like writeout of
last.FM scrobbler file and other neat things.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29309 a1c6a512-1295-4272-9138-f99709370657
Adds Nokia N900, N810 and N800 support.
Features:
- Introduce maemo specific platform defines
- Play audio in silent mode
- Stop playback on incoming calls
- Battery level readout
- Bluetooth headset support
- Save CPU by disabling screen updates if the display
is off or the app doesn't have input focus
- N900: GStreamer audio backend
Kudos to kugel for the code review.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29248 a1c6a512-1295-4272-9138-f99709370657
First, it add the ability to tagcache to walk through multiple search roots.
Second, it adds symlinks targets to the search roots if they're are not inside any of the current search roots, otherwise the symlink is ignored (unless it's a file).
The default search root is still /, so no search root will be actually added.
But the tagcache now isn't trapped by recursive symlinks anymore and successfully builds, and it's prepared for a future music directory setting.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28884 a1c6a512-1295-4272-9138-f99709370657
As a conditional it scales its value to the number of options you give it (like volume)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28613 a1c6a512-1295-4272-9138-f99709370657
For this it needs to look at the plugin header. Since lc_open() doesn't know
it's a plugin, the header needs to be changed slightly to include the new lc_header (which needs to be the first element in plugin_header so it can be casted savely).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28054 a1c6a512-1295-4272-9138-f99709370657
