Move scrollwheel parsing function into separate file as it's reused.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25425 a1c6a512-1295-4272-9138-f99709370657
Unify this optimized dbop transfer function and re-use it more often (it still handles 16bit transfers).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24198 a1c6a512-1295-4272-9138-f99709370657
This gets rid of LCD glitches on Sansa Fuze, and now LCD transfers can
get interrupted by button reading
Flyspray: FS #10603
Author: Bertrik Sikken
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24192 a1c6a512-1295-4272-9138-f99709370657
- add lcd_set_invert()
- add lcd_set_flip() commented out since not working fine yet:
mpegplayer isn't flipped, and statusbar display is buggy
- use the registers list from e200v2
- cosmetics (indentation fix, comments changes, function names, casts,
function moves, ...) to make the diff with lcd-e200v2.c shorter
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24181 a1c6a512-1295-4272-9138-f99709370657
- two essential parts of Sansa AMS drivers are optimzed away in newer gcc, so mark them volatile.
- use "r" instead of "i" (which is apparently invalid syntax) for the input list in some inline assembly
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23634 a1c6a512-1295-4272-9138-f99709370657
Increase maximum event count as we need more (I actually had a report about it during custom statusbar testing).
Removed corresponding functions from the core and plugin api. Bump min version and sort.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23302 a1c6a512-1295-4272-9138-f99709370657
The blue bars I previously had with this way are fixed by blocking DBOP output while reading buttons from GPIO.
We reached the maximum fps even at unboosted now (100.0 fps at lcd_update(), DBOP can't do more). Optimisation to YUV stuff is still possible though.
The e200v2 scrollwheel is very improved due to the this and the previous speedup since the chance of getting the wheel read blocked is greatly decreased with faster updates.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22578 a1c6a512-1295-4272-9138-f99709370657
Unaligned (to 4byte boundary) and odd (where the amount of data is not an integer multiple of 32bit) are still supported. Even those still have a speedup of >2.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22574 a1c6a512-1295-4272-9138-f99709370657
Those two drivers were so similar, merging them is worth a few more #ifdefs.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21474 a1c6a512-1295-4272-9138-f99709370657
- cache IRAM and DRAM
- map IRAM just next to DRAM to remove the need for -mlong-calls and reduce binsize
- tweak delays in Fuze button code
- tweak delays in Clip button code (down button sometimes doesn't respond anyway : an alternate driver is being worked on)
Before reporting any problem, please check your filesystem or format your player from the OF
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21228 a1c6a512-1295-4272-9138-f99709370657
*Correct/update some comments
*Make BUTTON_REPEAT generation more relable (do it like the e200v2, but with a shorter repeat intervall)
*adjust button_delay
*remove unecessary wait for fifo empty (no lcd function returns with fifo not empty)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21166 a1c6a512-1295-4272-9138-f99709370657
Fix CGU_DBOP setting
Set PCLK to the exact frequency (62MHz, not the maximal frequency)
Use a better comment for CLK_DIV macro
Use preprocessor safety checks for clock divider sizes to avoid future mistakes (not for SD_IDENT frequency since that check is handled by mci_set_clock_divider)
Use maximal IDE frequency of 66MHz (like OF), not 90MHz like written in AS3525 datasheet. The IDE chip is somehow linked to internal storage, and a too high frequency could affect the storage driver.
Use the same DBOP frequency of 32MHz for all models (like OF, verified clip, fuze, e200v2 and m200v4), compromise between performance and battery life could be added in the future for each target
Performance increase on Sansa Fuze with DBOP freq. set to 64MHz: +12% fps for lcd_update, +1% fps for yuv
Thanks to daytona955 on the forums for his help
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20923 a1c6a512-1295-4272-9138-f99709370657
a) lcd_enabled() is now lcd_active(), and is available for HAVE_LCD_SLEEP only targets (e.g. ipod video) too. It was depandent on HAVE_LCD_ENALE only before
b) rename the hook accordingly, and implement the hook for other other targets too (e.g. the clip [the only mono target with lcd_enable/lcd_sleep yet, so the code is still in the lcd driver], ipod, fuze, c200)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20331 a1c6a512-1295-4272-9138-f99709370657
1) fix driver from reading invalid home button while lcd updates (use old value then)
2) put in a 1s delay for power button reading after releasing hold
3) revert r20028, I thought it wasn't needed, since I didn't update the bootloader
4) enable hold for the bootloader (even though not really needed, but is consistent with other targets)
5) let button_dbop return DBOP_DIN, and do the reading in button_read_device
6) various cleanups
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20054 a1c6a512-1295-4272-9138-f99709370657
Reorder system_init() to initialize peripherals not only in bootloader
Use a 65MHz PCLK (and memclk) which will be needed for realtime decoding
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19330 a1c6a512-1295-4272-9138-f99709370657
Fix lcd drivers which stopped working after changing the PLL.
Move set_cpu_frequency() to a place where it is actually used.
Remove enable_irq() call already done by the bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19276 a1c6a512-1295-4272-9138-f99709370657
