Causes the track change to go in the wrong buffer (and even be missed
by playback) if the current descriptor for the write index is descriptor
0 because the offset used is "-1" upon track change.
Got nailed by implicit conversion of the % operator dividend to unsigned.
Change-Id: I32538db801ac9d790c8b1b5bd041b09ad4b64d2e
The idea is to share loading code between bootloaders and rolo().
Change-Id: I1656ed91946d7a05cb7c9fa7a16793c3c862a5cd
Reviewed-on: http://gerrit.rockbox.org/190
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
Currently we don't know where the serial number is stored on the
stmp3600. It is probably using the laser fuses but this needs to
be investigated
Change-Id: I1ac25e38b8f65635abb68788ceb65df0a740dabd
The old presets never made sense for Rockbox's EQ. They were apparently
copied from some other software. We have a parametric EQ, that means that
EQ bands can be made wider or narrower. Putting two identical bands side
by side just wastes battery life and adds rounding error. Replacement
presets are on gerrit but they need more work. In the mean time, users
should probably not be using these.
Change-Id: I85213100129fafd3ac0fa1a9438cb4d651bb94cb
The STMP3600 cannot lock some usb bits so there is only a single
status in POWER_STS. Also stmp3600 has no clock bypass and frac
div.
Change-Id: I101f4263bdddeff58e142d10f9b76dd643bf928d
This driver does debouncing and best lradc usage and only requires
a sorted table of values to work, this factoring code as much as
possible.
Change-Id: I84b46f4b08094634e1c5deb5ca9ba20763389e66
The driver is current unused and very minimal. It can used on
targets which have an accessible UART port and it will be used on
some creative targets as backlight control.
Change-Id: Id710d63574aadb0a2d7327b03187506b469470b1
Although everything is implemented, recording still doesn't work,
dma is stuck. Add code for reference until this get a proper fix.
Change-Id: Ifc016b00876230c6d337a5cd4f8bb90b856efac8
The old driver didn't behave nicely because it waiting for
stability which could never arrive on some gestures. The new one
uses a fixed delay and averaging.
Change-Id: I8ff80f373b6792e6d5fc3cfe41b709642e61c38b
Document various register macros (autogenerated). Fix memory map
for stmp3700, make framebuffer size configurable and cache aligned
and fix the PHYSICAL_ADDR macro.
Change-Id: I40a2875fb3eb35c6fce1158db37dbc0c1a10c68e
The lcd data line were not setup as input anymore, making register
reading plain broken and probably lead to bad lcd detection.
Change-Id: I281460f845537c58045f3893261ded5c9c6e53b5
Power management is somewhat different on stmp3700 which doesn't
have the 4.2V rail and completely different on stmp3600 which has
several DCDC. Currently only handle imx233.
Change-Id: Ic7815141286117b74022ffc53cfa48664fd7faac
Using the ssp macros, we can easily handle the stmp3600 which
has a single ssp block. Take care of all the nasty differences
between targets like bus width
Change-Id: If98a091cc262e9e6834f6fb9826f7c5515bfe621
Currently don't do anything on stmp3600 because emi is completely
different. On stmp3700 it is unsure how the pll lock is handled
and this will need more testing.
Change-Id: I3d11282531f54f2ecc4187c0d913e2c61f4de14d
Add finer granularity to start command: now commands can be
prepared, schedule and semaphore increased independently.
Change-Id: Ib1ed1f20f4b46dc61b6dbab6ddec8b54e3d832b9
Factorise pin setup, rewrite PIO code, add support for lcdif irq,
handle all the various differences between the stmps, drop yuv
blitting code since it already exists in the common lcd drivers.
Change-Id: Ifc40aed9b3b12f16611ce960602e46a5bc87ae53
The lradc architecture of the stmp3600 is rather different:
only channels 6 and 7 have configurable source and we need to
take care when allocating channels so that we can actually
measure the right channel! Delegate die temperature sensing to
the power block on stmp3600.
Change-Id: I0860eb4ea98240facc3d4a19d61684eca5f630cc
There are many small differences between them. In particular
some regulators are not available on stmp3600. Also the vbusvalid
detect method is not available as an irq on stmp3600 and seems
broken on stmp3700. Finally die temperature is handled by the
power block on stmp3600.
Change-Id: I2c68b418738f15564e445d3a1496018cef97fff7
