Previously it was sufficient to set those variables when running configure.
Since ANDROID_NDK_PATH is now also used in the Android Makefile set both
variables in the generated Makefile as well -- not everyone has (or wants) to
set them globally in the environment.
Change-Id: Ib64ffeea379c58c9d361b3fbfefb67084dce666c
The target all is set in libtools.make. Setting it here breaks make knowing
about the correct default target when cross compiling.
Change-Id: Icdd022094d28e4dcd442e48bb6acd1fd8f9a6ad6
Instead of trying every mountpoint during autodetection allow filtering out
filesystems that are not supported when retrieving the system mountpoints.
Change-Id: Ic23a5c804cb7c78c146dbc1af7443c67ce12464e
In the modern everything-can-be-skinned world, themes are beginning
to hit the limit of 8 fonts (which includes sysfont). Increasing this
to 12 will allow some headroom, at the cost of a bit more RAM usage
(about 20 bytes per extra possible font, so about 80 bytes total here)
Change-Id: Iddf4374b7ccf92b400614a7309bf3d2147ba98ab
The old way actually mis-used the API (I misunderstood the docs) because
it specified the marker position as a "low buffer watermark" but instead of a
future playback head position.
The replacement is a simple thread that writes the data regardless of the
filling level of the buffer (write() will just block) and polls the playback
state periodically.
Change-Id: If29237cee4ce78dc42f5a8320878bab0cafe78f7
Reviewed-on: http://gerrit.rockbox.org/422
Tested-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Correctly descramble the first stages (0 to 2) in continuous mode.
Also fix a disassembled (but unused) crc routine used in dfu mode.
Change-Id: I20016d1c696a9bcb6584377ee9b55493783c7159
This tool can upload a firmware to the device in DFU mode. The
protocol is the same as the rk27xx devices except that it can
load a bigger (unlimited ?) firmware.
Change-Id: Ic9d4c5087629a9156f9d5d5cdc80767e6359c431
There are two reasons for this:
- QUrl::toEncoded() has problems with some characters like the colon and @.
Those are not percent encoded, causing the string getting parsed wrongly when
reading it back (see FS#12166).
- The password is cleartext in the configuration file.
While using base64 doesn't provide any real security either it's at
least better than plaintext.
Since this program is open source any fixed mechanism to obfuscate /
encrypt the password isn't much help either since anyone interested in
the password can look at the sources. The best way would be to
eventually use host OS functionality to store the password.
Change-Id: I6ac49d68211236e540b6ca16481e0e1c196532b7
If the host is ARM simply checking the architecture the compiler produces
binaries for will include unwarminder even for the PC tools, breaking them.
Fixes building checkwps and database on ARM hosts. Doesn't fix warble, there
are additional problems with that.
Change-Id: I135b1103a60b9e3720117cde1075b7d73424f384
This was spotted while playing with qemu-jz:
1) rockbox reads TECR and TESR which are described as write-only
registers. Datasheet doesn't mention what happens if they are
readed. Apparently this doesn't have fatal side effects.
It comes down to two defines from jz4740.h
__tcu_stop_counter(n) and __tcu_start_counter(n) which use
read-modify-write sequence.
2) rockbox accesses out of bound offset 0xd4 in DMA memspace.
It comes from dis_irq() in system-jz4740.c. NUM_DMA is 6 but
DMA channels are 0-5 so (irq <= IRQ_DMA_0 + NUM_DMA)) bound
check is wrong.
This are *NOT* tested on device.
Change-Id: I29dff6a4f828030877b7d50fbcc98866478b9e3d
Reviewed-on: http://gerrit.rockbox.org/338
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Tested-by: Purling Nayuki <cyq.yzfl@gmail.com>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
Ideally this commit should go on top of the v3.13 branch
since the release is based on the v3.13 code base.
Change-Id: If13cf87463c7a3f7a9c2c96c916c543c9d2ed1a5
When creating a new HttpGet object schedule any old one for deletion instead of
dropping its reference and relying on Qt to clean it up once the parent object
is removed.
Change-Id: I66f2a6f01c6b6ad3a0dce0eb4fd3eacfaf7e733d
Schedule them for deletion instead of deleting them. That way pending events
can still be handled before the main loop deletes them. Fixes crashes on the
second download during installation.
Change-Id: I7c718dbb0200a64d1aa3bbb6c2839282fb965dec
SAPI only allowed values from 1.0 to 10.0, making it impossible to turn down
the volume of the voice. Increasing the volume by a factor of 10.0 is nothing
that is likely to be useful, so change the upper limit to 2.0 and decrease the
lower limit to 0.0.
Lame allowed values from 0.0 to 1.0, making it impossible to increase the
volume of the voice. Change the upper limit to 2.0 as well.
Change-Id: I8add103f6e4b3c8f1b11ee2c0ea478727bdc99c1
Prevents cutoff of tracks, especially short ones:
* Extend looped tracks by fade length to fade at start of loop repeat.
* No fade occurs for non-repeating track only having an intro.
* Uses id3.tail_trim field to store fade duration.
Use libGME built-in elapsed time reporting instead of custom calculation:
* libGME already reports in milliseconds.
* Don't advance time counter when Repeat == One. It just runs the progress
over the length limit.
Fix a comment about sample rate and set the reported bitrate to be
accurate for 44.1 kHz stereo.
Change-Id: I3ede22bda0f9a941a3fef751f4d678eb0027344c
This patch adds to YP-R0 (and other future targets using Linux
framebuffer) the ability to use LCD_ENABLE to save some CPU cycles
while display is powered off.
This patch also changes the way to toggle LCD power: now using
a proper ioctl call, slightly more efficient.
Change-Id: I544de77f5abd4ac1c13d3fe3a6e40a30f7c0bece
Reviewed-on: http://gerrit.rockbox.org/410
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
The GPIO device file wasn't closed due to this. This wasn't a big deal
because the device powers off shorty afterwards anyway.
Change-Id: I9a6b4d57d32627157323b4883e47b8812f5dcb4d
As per title this patch aims at splitting common target
code and specific target code in a better way to
support future ports within the same environment
(e.g. Samsung YP-R1 where the Linux and the SoC
are the same, with differences in hardware devices
handling)
Change-Id: I67b4918c46403b184d3d8f42ab5aae7d01037fd0
Reviewed-on: http://gerrit.rockbox.org/409
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
added a missing string and some other fixes
Change-Id: I153f42687cf855835b7a41b5b3adc4bf120f7f61
Reviewed-on: http://gerrit.rockbox.org/413
Reviewed-by: Purling Nayuki <cyq.yzfl@gmail.com>
Tested-by: Purling Nayuki <cyq.yzfl@gmail.com>
Reviewed-by: Alex Parker <rockbox@aeparker.com>
Tested-by: Alex Parker <rockbox@aeparker.com>
- Reduce the minimum step for EQ 'Gain' and EQ 'Q' values to .1dB
- Reduce the minimum step for EQ 'Precut' value to .1dB
Change-Id: I20712b3c769f9da4d6ed53c62d6a2a8352b6b269
Reviewed-on: http://gerrit.rockbox.org/414
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
- s/Ram/RAM/
Change-Id: I65ea87b5b2fce85d8d1a0cfaec06fb2c47aaa79f
Reviewed-on: http://gerrit.rockbox.org/415
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
