This logic is moved into apps (put_line()) which can better handle line
decorations with respect to scrolling, mulitline and other complications.
Firmware doesn't need this. The remaining drawing function know only one style,
that is foreground on background/backdrop (changing drawmode is still supported).
Change-Id: I707060edc388a7d723a7d09b0cf5cbda6ec56708
Since scrolling is now pixel-based this is not necessary anymore. custom line
height is handled by put_line() but can also possible to implement with
lcd_puts_scroll_func().
Change-Id: Iee9b12bf99afac93d95d2a1a6f5d5b4db237b21c
With this functions removed there is no exported function in firmware left
that draws line decorations. Also no function supports specifying an y-offset
anymore (was used for pixel accurate positioning of otherwise strictly line-based
API calls).
Both should be handled in apps/ now.
Change-Id: Iba4b28ccc6e686c7db63e34b51ad4badae983fce
It is similar to lcd_gradient_fillrect(), except that it only draws a part
of the complete gradient. This can be used to draw only the bottom half
of a full gradient.
Change-Id: Ib47cc5237f6966e35ba07988bddbb00fd97adf96
This function supports installing a custom scroll callback. This will be
called when the scrollengine redraws the line. It allows to draw extended
styles (or anything your can possible imagine) along with the text.
It is also strictly pixel-based, the first pixel-based function that supports
scrolling.
Change-Id: I57f81ac7b3d08b877aea4cb8afa882f175ebcdfc
Some seldomly used drawmode combinations did not work in conjunction with
alpha bitmaps and backdrops. Now all should work (see comment added) by using
more bits.
Change-Id: I2bc96ecf471fa8c1a608a321a235b9c8527b3dc5
This fixes the radioart crash that was the result of buffering.c working
on a freed buffer at the same time as buflib (radioart uses buffering.c for the
images). With this change the buffer is owned by buflib exclusively so this
cannot happen.
As a result, audio_get_buffer() doesn't exist anymore. Callers should call
core_alloc_maximum() directly. This buffer needs to be protected as usual
against movement if necessary (previously it was not protected at all which
cased the radioart crash), To get most of it they can adjust the willingness of
the talk engine to give its buffer away (at the expense of disabling voice
interface) with the new talk_buffer_set_policy() function.
Change-Id: I52123012208d04967876a304451d634e2bef3a33
Much of the scrolling work is moved from lcd-bitmap-common to lcd-scroll.c,
a small scroll callback routine remains. This callback can potentially be
overridden by more extensive scrollers.
The callback also gets fed with pixel-based scrolling information, which
finally removes the strict line-based nature of the scroll engine. Along with
this is the change from scroll_stop_viewport_line() to scroll_stop_viewport_rect()
which works on a pixel-based rectangle instead of lines.
The ultimate goal is to move most of the scroll work to apps, which can
much better decide which line decorations to apply etc. This work is laying
the ground work.
Change-Id: I3b2885cf7d8696ddd9253d5a9a73318d3d42831a
This allows to draw lines without destroying styles that were drawn manually
(e.g. from apps/) beforehand.
Change-Id: I0de290c9343061efb115e1b76da5b76395c2b2af
The port uses the imx233 soc, it's a STMP3650 based Samsung player
Change-Id: I50b6d7e77fd292fab5ed26de87853cd5aaf9eaa4
Reviewed-on: http://gerrit.rockbox.org/490
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
The code was trying to probe for volume presence by calling drive layer
with volume index. It is a miracle it get unnoticed so far. Introduce
proper volume probing using the vol->drive map in the disk layer.
Change-Id: I463a5bcc8170f007cad049536094207d2ba3c6fc
Reviewed-on: http://gerrit.rockbox.org/669
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Tested on iPod Mini 1G.
Change-Id: I67ac9b7ed84c34533107136d0aa72e5ce3bcc5bc
Reviewed-on: http://gerrit.rockbox.org/668
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
Originally written and uploaded by Lalufu (Ralf Ertzinger) in Feb 2012.
They have been condensed into a single patch and some further additions
by Andy Potter.
Currently includes Authentication V2 support from iPod to Accessory,
RF/BlueTooth transmitter support, selecting a playlist and selecting a
track from the current playlist. Does not support uploading Album Art
or podcasts. Has been tested on the following iPods,
4th Gen Grayscale, 4th Gen Color/Photo, Mini 2nd Gen, Nano 1st Gen and
Video 5.5Gen.
Change-Id: Ie8fc098361844132f0228ecbe3c48da948726f5e
Co-Authored by: Andy Potter <liveboxandy@gmail.com>
Reviewed-on: http://gerrit.rockbox.org/533
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
HiFi E.T. MA8 is almost the same as MA9 except
another DAC(pcm1792 in ma8, df1704 in ma9).
MA8 has ILI9342 lcd, MA8C has ILI9342C lcd.
Change-Id: If2ac04f5a3382590b2a392c46286559f54b2ed6a
The only difference between this target and HiFi E.T. MA9
is display driver (ILI9342 in MA9 and ILI9342c in MA9C)
Change-Id: Icc3d2490f850902a653175360f12283f3708bbb7
The new code can select among several types of window (user, system, ...).
Furthermore, the type of partitions to use is selectable in config file.
Currently, two types are support: Freescale style MBR and Creative MBLK
Change-Id: I969d60a3d08f2c9448fb4b9c440051b7801b94cd
Currently we only support the BGA169 but if by chance Rockbox was to run on
a lqfp package for example, some pins may becomes unavailable or different.
Change-Id: I5c0d8d57ae31604572af37e0c2edd0bd7bda73a3
Disabling these two settings makes the image small enough to build again.
This build has been broken for long enough without any better solution
actually being worked on, so I think this is much better than nothing.
Change-Id: I77c34c1e714fb6e132ed0ce39f0917779efe1125
Enable simulator for the target ypr0 to
be built and used.
Change-Id: I1b080f07ab90f5c4856881d08ad70e1053bbb0c0
Reviewed-on: http://gerrit.rockbox.org/618
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
Even with volume at minimal fuze+ was still playing sound pretty loud.
this fix it.
Change-Id: I5b18e9c39ced240eebb0457c433b0ca150668860
Reviewed-on: http://gerrit.rockbox.org/621
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Target that have a touchpad/touchscreen should disable it while
being locked (In order to avoid LCD to drain battery power due to
"key locked" constant reporting messages. If they a have a keylock
button this was already handled at driver level. If not (e.g. fuze+),
they will have to implement a switch at driver level that action.c
can operate on softlock.
This patch does the following for any target having a touchpad
or a touchscreen and no HAS_BUTTON_HOLD (ie any softlock target)
1) it implements the code to call button_enable_touch(bool en) in
action.c.
2) button_enable_touch is implemented in button.c and call
either touchpad_enable or touchscreen_enable
3) those two function are implemented respectively in touchscreen.c
and a new touchpad.c file. They provide a generic way to silents touch's
device and call a function at driver level where target specific code
can be implemented if possible/needed (for power saving for instance).
Those function name are touchpad_enable_device and touchscreen_enable_device
4) we implement an empty function at driver level of targets that need it
to have them still being able to compiled.
Change-Id: I9ead78a25bd33466a8533f5b9f259b395cb5ce49
Reviewed-on: http://gerrit.rockbox.org/569
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
When using variadic macros there's no need for IF_MD2/IF_MV2 to deal
with function parameters. IF_MD/IF_MV are enough.
Throw in IF_MD_DRV/ID_MV_VOL that return the parameter if MD/MV, or 0
if not.
Change-Id: I7605e6039f3be19cb47110c84dcb3c5516f2c3eb
Implement standard values and functions to operate on power control
register. This allow to modify both reporting rate and sleep mode
in order to save power.
Change-Id: I2bdffd4160e10eec488eb5e19de8a2a258ddbb04
Reviewed-on: http://gerrit.rockbox.org/529
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Using a better resolution causes havoc in the user interface
because it doesn't properly handle steps and people start to
believe I am responsible for all this mess.
Change-Id: I02b68dce5802692efde3da226eeeb49e4995f97a
* Remove explicit tracking of elapsed time of previous track.
* Remove function to obtain auto skip flag.
* Most playback events now carry the extra information instead and
pass 'struct track_event *' for data.
* Tweak scrobbler to use PLAYBACK_EVENT_TRACK_FINISH, which makes
it cleaner and removes the struct mp3entry.
Change-Id: I500d2abb4056a32646496efc3617406e36811ec5
Replaces the NATIVE_FREQUENCY constant with a configurable frequency.
The user may select 48000Hz if the hardware supports it. The default is
still 44100Hz and the minimum is 44100Hz. The setting is located in the
playback settings, under "Frequency".
"Frequency" was duplicated in english.lang for now to avoid having to
fix every .lang file for the moment and throwing everything out of sync
because of the new play_frequency feature in features.txt. The next
cleanup should combine it with the one included for recording and
generalize the ID label.
If the hardware doesn't support 48000Hz, no setting will be available.
On particular hardware where very high rates are practical and desireable,
the upper bound can be extended by patching.
The PCM mixer can be configured to play at the full hardware frequency
range. The DSP core can configure to the hardware minimum up to the
maximum playback setting (some buffers must be reserved according to
the maximum rate).
If only 44100Hz is supported or possible on a given target for playback,
using the DSP and mixer at other samperates is possible if the hardware
offers them.
Change-Id: I6023cf0c0baa8bc6292b6919b4dd3618a6a25622
Reviewed-on: http://gerrit.rockbox.org/479
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
Basically, just give it a good rewrite.
Software codec recording can be implemented in a more straightforward
and simple manner and made more robust through the better codec
control now available.
Encoded audio buffer uses a packed format instead of fixed-size
chunks and uses smaller data headers leading to more efficient usage.
The greatest benefit is with a VBR format like wavpack which needs
to request a maximum size but only actually ends up committing part
of that request.
No guard buffers are used for either PCM or encoded audio. PCM is
read into the codec's provided buffer and mono conversion done at
that time in the core if required. Any highly-specialized sample
conversion is still done within the codec itself, such as 32-bit
(wavpack) or interleaved mono (mp3).
There is no longer a separate filename array. All metadata goes
onto the main encoded audio buffer, eliminating any predermined
file limit on the buffer as well as not wasting the space for
unused path queue slots.
The core and codec interface is less awkward and a bit more sensible.
Some less useful interface features were removed. Threads are kept
on narrow code paths ie. the audio thread never calls encoding
functions and the codec thread never calls file functions as before.
Codecs no longer call file functions directly. Writes are buffered
in the core and data written to storage in larger chunks to speed up
flushing of data. In fact, codecs are no longer aware of the stream
being a file at all and have no access to the fd.
SPDIF frequency detection no longer requires a restart of recording
or plugging the source before entering the screen. It will poll
for changes and update when stopped or prerecording (which does
discard now-invalid prerecorded data).
I've seen to it that writing a proper header on full disk works
when the format makes it reasonably practical to do so. Other cases
may have incorrect data sizes but sample info will be in tact. File
left that way may play anyway.
mp3_enc.codec acquires the ability to write 'Info' headers with LAME
tags to make it gapless (bonus).
Change-Id: I670685166d5eb32ef58ef317f50b8af766ceb653
Reviewed-on: http://gerrit.rockbox.org/493
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
The idea is to share loading code between bootloaders and rolo().
Change-Id: I1656ed91946d7a05cb7c9fa7a16793c3c862a5cd
Reviewed-on: http://gerrit.rockbox.org/190
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
Document various register macros (autogenerated). Fix memory map
for stmp3700, make framebuffer size configurable and cache aligned
and fix the PHYSICAL_ADDR macro.
Change-Id: I40a2875fb3eb35c6fce1158db37dbc0c1a10c68e
Eliminates the pcmrec thread and keeps playback and recording engine
operation mutually-exclusive.
audio_thread.c contains the audio thread which branches to the
correct engine depending upon the request. It also handles the main
audio initialization.
Moves pcm_init into main.c just before dsp_init because I don't want
that one in audio_init in the new file.
(Also makes revision df6e1bc pointless ;)
Change-Id: Ifc1db24404e6d8dd9ac42d9f4dfbc207aa9a26e1
HAVE_SW_VOLUME_CONTROL is required and at this time only affects the
SDL targets using pcm-sdl.c.
Enables balance control in SDL targets, unless mono volume is in use.
Compiles software volume control as unbuffered when
PCM_SW_VOLUME_UNBUFFERED is defined. This avoids the overhead and
extra latency introduced by the double buffer when it is not needed.
Use this config when the target's PCM driver is buffered and sufficient
latency exists to perform safely the volume scaling.
Simulated targets that are double-buffered when made as native targets
remain so in the sim in order to run the same code.
Change-Id: Ifa77d2d3ae7376c65afecdfc785a084478cb5ffb
Reviewed-on: http://gerrit.rockbox.org/457
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
If AUDIOHW_CAPS is defined without explicit BASS_CAP/TREBLE_CAP while
HAVE_SW_TONE_CONTROLS is defined, AUDIOHW_HAVE_BASS/TREBLE should be
defined or otherwise the tone controls won't show up. TREBLE/BASS were
being defined if AUDIOHW_CAPS was NOT defined, but the same rule should
apply if the codec needs to specify other caps but doesn't use hardware
tone controls.
(I'm surprised noone noticed some settings gone missing :-)
Change-Id: I85b5c467bab07bb62362a0dc2d582267ac2d8ec9
Based on FS#9920 by Ryan Press with changes to selection logic so
that it works on my iPod Photo. Should also work on iPod Color/4G
and Mini2G. Moved all target specific code from
firmware/drivers/serial.c into new file
firmware/target/arm/pp/uart-pp.c in the same manner as other
target specific uart code.
Update to fix build error on ipodmini2g by adding defines in config file.
Removed unwanted whitespace
Tested on iPod Photo.
Change-Id: Ia5539563966198e06372d70b5adf2ef78882f863
Reviewed-on: http://gerrit.rockbox.org/455
Reviewed-by: andypotter <liveboxandy@gmail.com>
Tested-by: andypotter <liveboxandy@gmail.com>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
* SOUND_x enum can be generated by audiohw_settings.h along with settings
entries and sound_val2phys.
* VOLUME_MIN and VOLUME_MAX are no longer necessary within sound.c. If
you need them, they are for target-defined purposes.
* Fix up SDL volume implementation in sdl.c. Move sim volume calculation
code to pcm-sdl.c.
* Min trigger tresholds were based upon VOLUME_MIN for some reason.
These setting have nothing to do with playback volume. Since it is no
longer present, set these at -89dB which is the minimum peak meter
sensitivity setting.
* Fix an oversight in wm8758.c. I forgot to add the dB->register
conversion to audiohw_set_volume.
Change-Id: Ie1df33f1793eee75e6793f16bc7bddd16edb7f75
This is going right in since it's long overdue. If anything is goofed,
drop me a line or just tweak it yourself if you know what's wrong. :-)
Make HW/SW codec interface more uniform when emulating HW functionality
on SWCODEC for functions such as "audiohw_set_pitch". The firmware-to-
DSP plumbing is in firmware/drivers/audiohw-swcodec.c. "sound_XXX"
APIs are all in sound.c with none in DSP code any longer.
Reduce number of settings definitions needed by each codec by providing
defaults for common ones like balance, channels and SW tone controls.
Remove need for separate SIM code and tables and add virtual codec header
for hosted targets.
Change-Id: I3f23702bca054fc9bda40f49824ce681bb7f777b
Onda VX747 sim was missing a limits #define; #include limits.h in
pcm_sw_volume.h.
Simply use the software volume control for the SIM volume control
rather than the SDL volume control when the target would have it
natively.
Change-Id: I8e924a2ff1b410f602452d2ea9b691efb82c931e
Implements double-buffered volume, balance and prescaling control in
the main PCM driver when HAVE_SW_VOLUME_CONTROL is defined ensuring
that all PCM is volume controlled and level changes are low in latency.
Supports -73 to +6 dB using a 15-bit factor so that no large-integer
math is needed.
Low-level hardware drivers do not have to implement it themselves but
parameters can be changed (currently defined in pcm-internal.h) to work
best with a particular SoC or to provide different volume ranges.
Volume and prescale calls should be made in the codec driver. It should
appear as a normal hardware interface. PCM volume calls expect .1 dB
units.
Change-Id: Idf6316a64ef4fb8abcede10707e1e6c6d01d57db
Reviewed-on: http://gerrit.rockbox.org/423
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
In the modern everything-can-be-skinned world, themes are beginning
to hit the limit of 8 fonts (which includes sysfont). Increasing this
to 12 will allow some headroom, at the cost of a bit more RAM usage
(about 20 bytes per extra possible font, so about 80 bytes total here)
Change-Id: Iddf4374b7ccf92b400614a7309bf3d2147ba98ab
This was spotted while playing with qemu-jz:
1) rockbox reads TECR and TESR which are described as write-only
registers. Datasheet doesn't mention what happens if they are
readed. Apparently this doesn't have fatal side effects.
It comes down to two defines from jz4740.h
__tcu_stop_counter(n) and __tcu_start_counter(n) which use
read-modify-write sequence.
2) rockbox accesses out of bound offset 0xd4 in DMA memspace.
It comes from dis_irq() in system-jz4740.c. NUM_DMA is 6 but
DMA channels are 0-5 so (irq <= IRQ_DMA_0 + NUM_DMA)) bound
check is wrong.
This are *NOT* tested on device.
Change-Id: I29dff6a4f828030877b7d50fbcc98866478b9e3d
Reviewed-on: http://gerrit.rockbox.org/338
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Tested-by: Purling Nayuki <cyq.yzfl@gmail.com>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
This patch adds to YP-R0 (and other future targets using Linux
framebuffer) the ability to use LCD_ENABLE to save some CPU cycles
while display is powered off.
This patch also changes the way to toggle LCD power: now using
a proper ioctl call, slightly more efficient.
Change-Id: I544de77f5abd4ac1c13d3fe3a6e40a30f7c0bece
Reviewed-on: http://gerrit.rockbox.org/410
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
As per title this patch aims at splitting common target
code and specific target code in a better way to
support future ports within the same environment
(e.g. Samsung YP-R1 where the Linux and the SoC
are the same, with differences in hardware devices
handling)
Change-Id: I67b4918c46403b184d3d8f42ab5aae7d01037fd0
Reviewed-on: http://gerrit.rockbox.org/409
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
The build of bootloader with HAVE_ATA_DMA fails because of missing
commit_discard_dcache(). This seems to be bigger problem as
bootloader builds don't call cache_init() also which seems wrong.
but I know too little about the PP platform to judge.
For now use ATA DMA only in regular builds.
Change-Id: I82873cb1771f5a95ebfbef91ce26744e3abd743c
PP502x ATA DMA was disabled in 55fab77 because it caused various
instability on all targets using it. This instability is fixed in
583c948 via FS#12391. Here, ATA DMA is enabled for all PP502x targets
except nano1g and hdd6330. For nano1g, there may be other causes of
instability and more testing is needed. ATA DMA does not work on hdd6330.
Change-Id: I786b9edb19e74e6eb957ab205ea026f0969200ac
Reviewed-on: http://gerrit.rockbox.org/340
Tested-by: David Hooper <dave@beermex.com>
Tested-by: Boris Gjenero <boris.gjenero@gmail.com>
Reviewed-by: Szymon Dziok <b0hoon@o2.pl>
Tested-by: Szymon Dziok <b0hoon@o2.pl>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
pcm_dma_apply_settings(): sets the configured PCM frequency,
all native CS42L55 sample rates are available.
Change-Id: I2fcd5581457a669c3044516804cb64fb972218d0
Fixes missing Settings - General Settings - System - Disk - Spindown
setting.
Change-Id: Iae686598dfd7ad4ca1faf8db9f1271e7808de752
Reviewed-on: http://gerrit.rockbox.org/376
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Tested-by: Michael Giacomelli <giac2000@hotmail.com>
Use %x9(id) to draw an image in the whole current viewport using the
9 segment drawer (which draws the corners as normal and *tiles*
the middle segments to the needed width/height).
Future work is to make it scale instead of tile
Change-Id: Ic3ed1cad93f96091694801eb442e0da5a2401203
Some USB controllers like the one of the Rockchip 27xx handle some
requests in pure hardware. This is especially a problem for two
of them:
- SET ADDR which is used by our core to track the DEFAULT/ADDRESS
state and is required for the drivers to work properly
- SET CONFIG which is used by our core to initialise the drivers
by calling init_connection()
In these cases we need a way to notify the core that such requests
happened.
We do this by exporting two functions which directly notify the
core about these requests and perform the necessary init steps
required without doing the actual USB transfers. Special care is
needed because these functions could be called from an interrupt
handler. For this reason we still use the usb_queue and introduce
new IDs so that they are processed in order and safely.
No functional change is intended, both in the usbstack and on
targets without such quirks.
Change-Id: Ie42feffd4584e88bf37cff018b627f333dca1140
* Adds some additional niftyness like a floating popup display that
is implemented in an OSD library for use by other plugins.
* Speed changes are now gradual for both views and follow a curve
derived from some fiddling around to get a nice feel.
* Refined a few behavioral things overall.
It needs a bit of help from a direct PCM channel callback so it may
capture PCM for waveform display. Also need a few other core routines
to help out for the OSD.
Messes with some keymaps. Some targets need keymaps to access the
different views. Some devices can't support the additional view
because it requires a large buffer ( > 1 s) for samples.
If the plugin buffer is small, they can still use the popup display
since the plugin is also much smaller in that case.
Slow speed waveform needs some refining so it draws gradually like
a real oscilloscope but I'll stick with what it is, for the moment.
Change-Id: Ieb5b7922a2238264e9b19a58cb437739194eb036
Reviewed-on: http://gerrit.rockbox.org/245
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
The running count is only 16-bit wide, since the always tick
setting derives from the crystal clock at 24MHz the user timer
cannot be set lower than ~300Hz which is already too high.
Switch to the 32KHz crystal source to fix this.
Change-Id: Ie7775460b17ea7ab331738734e3d688ad5563857
Uses register polling method to decide when it's time to decode
RDS packets.
Change-Id: I1d3cc995ea3350ec7b101438b8f2027130d4a4c9
Reviewed-on: http://gerrit.rockbox.org/320
Reviewed-by: Lorenzo Miori <memorys60@gmail.com>
Tested-by: Lorenzo Miori <memorys60@gmail.com>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
Make set_sleep_timer a static function and only call
set_sleeptimer_duration externally, which is always called with minutes
values.
Change-Id: I985308bf014e354f91c47a0b2bf62f4f5a591919
Reviewed-on: http://gerrit.rockbox.org/327
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Use DMA engine for fullscreen updates and bypass mode for partial
updates. This gives major boost on rk27generic:
default ARM:AHB:APB 200💯50
HEAD 1/1: 26.3fps 1/4: 105.0fps
patched 1/1: 116.5fps 1/4: 249.5fps
with freq scalling NORMAL mode ARM:AHB:APB 50:50:50
HEAD 1/1: 13.1fps 1/4: 52.5fps
patched 1/1: 54.5fps 1/4: 119.0fps
Tested on rk27generic noname DAP and on Hifimans.
Change-Id: Id9dd4d2d61542c7ea6b5c6336b170d6357cefde9
Implemented scheme:
ARM AHB APB
Normal 50 50 50 MHz
Max 200 100 50 MHz
Frequency scaling is disabled on rk27generic due to too
slow lcd updates when running with 50MHz AHB.
battery_bench shows ~1h runtime improvement on hifiman.
Change-Id: I2c6f8acf6d4570c4e14f5bcc72280b51ce13c408
Due to the way Archos devices (i.e. the only HWCODEC devices) boot,
memory is tight these days. Disabling LOGFDISK on them will make them
work for now. In the long term a better solution is needed.
Change-Id: Ifc6bb97a81cc33545294e319bbc0a6c499788d39
Further merge drivers by using the same command and data functions.
No use one mutex per drive instead of a global sd lock. Fix the
RCA handling which was different between SD and MMC (shifted 16)
and thus confusing. Add MMC commands definition to the mmc.h
header similarly to the SD one. Change MMC handling a bit by
selecting/deselecting on each transfer like SD, which allows
for several MMC devices in theory and is more uniform.
Change-Id: I7024cb19c079553806138ead75b00640f1d2d95c
Merge sd and mmc drivers into a single sdmmc driver. This allows
some factoring of the code and simplify bug fixing. Also fix the
dma/cache related issue by doing all transfers via a correctly
aligned buffer. The current code is not smart enough to take
advantage of large user buffers currently but at least it is safe!
Change-Id: Ib0fd16dc7d52ef7bfe99fd586e03ecf08691edcd
Also, add dummy defines for application targets so that ERRORF, etc
map to DEBUGF instead of a compile error and add a new line at the
end of logf.c.
Change-Id: Ie7c5bc3397a853af619e810defce6123114e7a51
Logs information, errors, etc to disk using the register_storage_idle_func
mechanism to write to the disk when available. Currently, this is disabled
in normal builds, but can be enabled by adding ROCKBOX_HAS_LOGDISKF to the
config file. By default, it uses a 2KB buffer and drops text if the buffer
overflows.
The system includes a simple warning level mechanism that can be used to by
default exclude non-serious errors from logging on release builds.
Change-Id: I0a3d186a93625c7c93dae37b993a0d37e5a3a925
Reviewed-on: http://gerrit.rockbox.org/288
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Tested-by: Michael Giacomelli <mgiacomelli@gmail.com>
Reviewed-by: Michael Giacomelli <mgiacomelli@gmail.com>
It was also broken functionally, probably since a while.So restore the
functionality. Run it on the dap, the tcd files will be placed into .rockbox folder.
Change-Id: Id7a6ce4389dfaf99799258902be80d630af0601c
6b8330d was not the correct fix. In fact, it prevents settings from being
written as there's no DISK_EVENT_SPINUP event, so they were only saved on
proper shutdown.
Change-Id: Iad26366f2821ed6adf445c391d461563c5782a71
Basically it uses the default SI4700 radio chip driver, the only thing that's different is the I2C access,
written specifically to interact with my kernel module.
Next things to add are:
- RDS support!
Change-Id: I0ed125641e00f93124d7a34f90dd508e7f1db5a4
Signed-off-by: Lorenzo Miori <memorys60@gmail.com>
Refactor native/hosted implementation seperation while at it
(no wrappers starting with _ anymore).
Change-Id: If68ae89700443bb3be483c1cace3d6739409560a
The logic got broken by 6b8330d2.
Since the ifp700 port is basically unmaintained and unfinished and doesn't
build anyway, we can remove the special-casing for it. This simplifies the
logic to "hosted or native, except for bootloaders", which simplifies
further to "not bootloaders".
Fixes FS#12685
Change-Id: Iaaad534067da22b74bf647aa58dcbb678bbc5f70
Because DMA descriptors needs to be committed and discarded from
the cache, if they are not cache aligned and/or if their size
is not a multiple of cache ligne, nasty side effects could occur
with adjacents data. The same applies to DMA buffers which are
still potentially broken. Add a macro to ensure that these
constraints will not break by error in the future.
Change-Id: I1dd69a5a9c29796c156d953eaa57c0d281e79846
I successfully identified the STC/RDS pin as B2P27.
Strangely the OF uses polling instead of interrupts
but since they routed it, let's use it! On the fuze+
the fmradio i2c uses bit toggling so we can't read
the RDS data in the interrupt context. Instead we
defer the work to a thread.
Change-Id: Iedfa425320e6c91b4351b72e97c732696bdb2b73
Reviewed-on: http://gerrit.rockbox.org/236
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Also move the definition to config.h
Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff
Reviewed-on: http://gerrit.rockbox.org/234
Reviewed-by: Nils Wallménius <nils@rockbox.org>
It was only needed by the old arm toolchain that we no longer use or support.
Change-Id: Id0e6c67477f8834a637079b03cde5fbf9da68b1c
Reviewed-on: http://gerrit.rockbox.org/233
Reviewed-by: Nils Wallménius <nils@rockbox.org>
It's always used in MONO mode and doesn't need the IRAM sample/
resample buffers and 1280 bytes can be freed.
M5 can now have its PCM mixer downmix buffer in IRAM.
Change-Id: I0af08be5b212b7dfe382bba588a6585eb328a038
librbcodec users must provide these two files when the library is built.
rbcodecconfig.h provides configuration #defines and basic types, and
will be included by public librbcodec headers, so it must not conflict
with the user's code. rbcodecplatform.h provides various OS functions,
and will only be included by source files and private headers. This
system is intended to provide maximum flexibility for use on embedded
systems, where no operating system headers are included. Unix systems
can just copy rbcodecconfig-example.h and rbcodecplatform-unix.h with
minimal changes.
Change-Id: I350a2274d173da391fd1ca00c4202e9760d91def
Reviewed-on: http://gerrit.rockbox.org/143
Reviewed-by: Nils Wallménius <nils@rockbox.org>
Tested-by: Nils Wallménius <nils@rockbox.org>
Mixer needn't keep peak data around that will never be used. Just
pass pcm_peaks structure to it instead of allocating for every
channel. Plugin API becomes incompatible.
vu_meter digital mode was still using global peak calculation;
switch it to playback channel like the rest.
Remove some accumulated soil peaks inside pcm.c and make it more
generic.
Change-Id: Ib4d268d80b6a9d09915eea1c91eab483c1a2c009
Buffers are not allocated and thread is not created until the first
call where voice is required.
Adds a different callback (sync_callback) to buflib so that other
sorts of synchonization are possible, such as briefly locking-out the
PCM callback for a buffer move. It's sort of a messy addition but it
is needed so voice decoding won't have to be stopped when its buffer
is moved.
Change-Id: I4d4d8c35eed5dd15fb7ee7df9323af3d036e92b3
Creates a standard buffer passing, local data passing and messaging
system for processing stages. Stages can be moved to their own source
files to reduce clutter and ease assimilation of new ones. dsp.c
becomes dsp_core.c which supports an engine and framework for effects.
Formats and change notifications are passed along with the buffer so
that they arrive at the correct time at each stage in the chain
regardless of the internal delays of a particular one.
Removes restrictions on the number of samples that can be processed at
a time and it pays attention to destination buffer size restrictions
without having to limit input count, which also allows pcmbuf to
remain fuller and safely set its own buffer limits as it sees fit.
There is no longer a need to query input/output counts given a certain
number of input samples; just give it the sizes of the source and
destination buffers.
Works in harmony with stages that are not deterministic in terms of
sample input/output ratio (like both resamplers but most notably
the timestretch). As a result it fixes quirks with timestretch hanging
up with certain settings and it now operates properly throughout its
full settings range.
Change-Id: Ib206ec78f6f6c79259c5af9009fe021d68be9734
Reviewed-on: http://gerrit.rockbox.org/200
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
Player-specific code remaining: usb_drv_(init,exit)
The iPods lack a MMU, so:
- physical, virtual, and uncached addresses are identical
- since we can't access uncached memory we discard caches when receiving data
Still not quite reliable on nano2g
Change-Id: Iebb79df64818b9ae3b68eccb8be8975ebd6c21ea
Better than inserting ".word 0x51fc/b". Assembler doesn't support
them but does the plain "tpf" without extension words as well as
"trapf".
Change-Id: I929c0ec84c6e76e0573ff6308634542fd8aee738
Differences between signed samples cover the entire unsigned 32-bit
range. "abs" will think any difference exceeding INT32_MAX is negative
which is not corrent. Test which argument is greater and subtract the
lesser from it, outputting unsigned difference.
Change-Id: I73a8e5e418d49ff73d1a7c98eeb4731946dcfe84
The scrolling code cannot differentiate between the BUTTON_TOUCHSCREEN post
from normal touches and the one posted in the timeout callback.
To fix introduce a global special button (BUTTON_REDRAW) that results
in the desired redraw. This existed already as a local kludge for android
and is now generalized.
Change-Id: I6bfa6c66431c48f5042fcd8fce2ea72cd3457f58
