This reverts commit 4695f80230.
Reason for revert: Something else is unboosting the thread this is a red herring
Change-Id: I0e71e0065b13129bbf59d45416c15799c446dcad
reset quiet counter after Q_VOICE_STOP
when the voice system is doing un-queued voice clips you can get a
voice_stop event which cancels the cpu boost but the quiet count was not reset
next clip will play unboosted causing stuttering
Change-Id: Icaada443e2399bf146e30bebee599db5b379063a
Adjust the battery scale to be a little better. I've set
the 100% (discharge) point to be where the battery sags to
when it is done charging but still plugged in.
Not quite sure how best to set the charge scale, it's just
equal to the discharge scale for now.
Change-Id: I9a2730c0b2051300af9eeddb4f67164f38a29002
IMHO the current name is somewhat misleading:
- usb_drv_send() is blocking and we have usb_drv_send_nonblocking()
for the non-blocking case. This inconsistent naming can only
promote confusion. (And what would we call a blocking receive?)
- Other hardware abstraction APIs in Rockbox are usually blocking:
storage, LCD, backlight, audio... in other words, blocking is the
default expected behavior, with non-blocking calls being a rarity.
Change-Id: I05b41088d09eab582697674f4f06fdca0c8950af
A reasonable default assumption for a user
would be that they can plug their device into
a USB AC adapter and it will charge with as much
current as it reasonably can. With the previous
default, an AC adapter will only do 100mA, basically
a trickle charge.
Make this configurable default per-device, so as not
to break old devices without testing.
Define TARGET_USB_CHARGING_DEFAULT to USB_CHARGING_FORCE
to use the new default.
Tested on both erosQ Native and M3K.
Change-Id: I77265d356a41d67357ebc6e9f7e0c25a37b74931
-Link 'Artist' entry to canonicalartist field.
-Convert all possible users of artist field to canonicalartist.
-Tweak 'Same as current -> Artist' menu to also include albumartist field matches.
Change-Id: I52e87cc0bd6ca50f1645447819ca55669df37354
Fixes backlight not turning on after booting (tested on an iPod Mini 2G).
backlight_hw_init() copied from iPod 4G.
Change-Id: I9c32ca5ecd3dc74ea997e6cb843da79d303b0615
The yes/no keymap does not fall back to the Standard
keymapping, so keys other than Back and Power do not
cancel, though the prompt says "any other key".
Adding fallback to standard context as well as explicit
Left, Right, Vol+ and Vol- as they're not present in
the standard context.
Tested on physical m3k
Change-Id: I06409bad8dcde6586e1bf773309ef0ce464cc060
Set the maximum volume on both hosted and native ports
to -2 dB.
Verified behavior here on native and by borkitall on irc
for hosted.
Change-Id: I3aebc2bb4b9294a4137a33694c83139c0d76099a
Add fallback to CONTEXT_STD and add explicit Play button cancel -
Play button is not present in standard context, so it won't do
anything if unknown actions are ignored.
tested on ipod simulator
Change-Id: Ic259fa97b6195ebbc66fcfae31265cc7aeefa421
This fixes a bug reported on IRC:
1. Set 'bookmark on stop' to 'ask'
2. Play a track from the file browser
3. Stop playback, yes/no screen briefly flashes then disappears.
The screen still handles input correctly but the prompt will not
be displayed on the LCD. Long story short, get_action() can cause
the skin engine to do a full redraw which cleared the screen and
erased the prompt.
There is a special event, GUI_EVENT_NEED_UI_UPDATE, which the list
code uses to avoid precisely this problem.
Hooking up a handler for this event and redrawing the yes/no prompt
fixes the bug.
Change-Id: If3c26655540c13b488b3a11bd46e1d60d4111469
These were deprecated by 1eb17dc9f4 back in 2013 just prior to the
3.13 release. We've had 3.14 and 3.15 since then and I guess nobody
will complain if we finally remove them (fingers crossed...)
Also fix a line which got missed when converting hardcoded numbers
to EQ_NUM_BANDS in that commit.
Change-Id: I79dd71f1f2810bf19bc135999868fafc5fee6e04
add a helper function to allow plugins to parse the parameter string
passed into plugins
support included for bool, char, string and numbers+decimals
Change-Id: I39f35c8bd3c21b83097a538c19f46d362c468fa4
'Bugfix' mono_bitmap_part reads ahead in the buffer,
if the height is <= char bit pixels other memory gets read
found with [Address Sanitizer]
also g#3332 since this is clearly a problem across the code
instead place the check for height < 8 in the lcd_mono_bitmap_part function
second try places the check above the negative y offset
this was causing glitches on the Q1 and likely other TS targets
since a negative y was added to height it made it < CHAR_BIT setting
stride = 0 even though the bitmap was >= CHAR_BIT high
Change-Id: I13bb8ab472c2ae61302a6de5d9e2c78243354460
The EQ enabled setting needs to call into the DSP core when it's
changed but this was only hooked into the EQ menu. The quickscreen
uses option_select_next_val() so those DSP hooks were not getting
called because the setting did not have any callback defined.
It seems this bug was introduced by 362f7a3220 removing the blanket
call to settings_apply(). Other settings might be affected too.
Change-Id: Idcce5809c525fa619e6bdf1be50c98a5df103fec
It's not yet working and because all storage is removable (and the OF
works fine) it's of limited utility aynway.
Change-Id: I8a6a59ac16503d0f4574c3934f473cac54e86858
* Power button is what forces entry into USB mode
(can't use the other buttons due to the long SADC warmup)
* Inching closer to working USB disk mode (starts then disconnects!
Change-Id: I45ff1c61f39e0e0c3615b38278f5c91b6ef2ed6c
share all the core icons with plugins
these are all small mono icons like usb plug icon or
play, fast forward, rewind icons
--include the icon_helper function
Change-Id: I385028815a4dd368515f491a9e19dee3d500252d
- Enable repeat for prev/next keys
- Provide a way to access the context menu using buttons
- Update the manual
Change-Id: I53a7474cc64f915851175aea0695229c581fd8a6
We want to load builtin filetypes and other config files even if
there is a problem loading viewers.config. A lot of menus expect
the builtin types to be there and don't work if they're missing.
Change-Id: Ie39c8b9ef184fe0d638bacbe18e5f2d22900bd81
