PCLK doesn't use PLLA as a source but FCLK, so when changing FCLK with
CGU_PROC register, we must change PCLK as well with CGU_PERI register
Operate with 24MHz PCLK (and unboosted FCLK) for Clipv2/Clip+
Use 60MHz on Fuzev2 to keep the display fast enough (still slower than
Fuzev1 though)
µSD seems to function correctly now
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25475 a1c6a512-1295-4272-9138-f99709370657
Make the Windoes binary try to detect if it's running under Wine. Display a
warning if so, as Rockbox Utility is likely to fail in all kind of strange ways
when running on Wine. We do provide Linux binaries, so it's not even a good
idea to try running under Wine at all.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25471 a1c6a512-1295-4272-9138-f99709370657
Lots of the changes are due to changing storage_(read|write)sectors() from macros to wrapper functions. This means that they have to be called with IF_MD2(drive,) again.
Flyspray: FS#11167
Author: Frank Gevaerts
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25459 a1c6a512-1295-4272-9138-f99709370657
We can write to DBOP_DOUT in 8 bits mode : bits 7..0 are mapped to the
LCD, not bits 15..12 and 3..0 like on Clipv1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25455 a1c6a512-1295-4272-9138-f99709370657
1 more hour of battery life measured on Clip+ : 16h30 with mp3 @192kbps
Fuzev2 frequency isn't changed because the scrollwheel is less
responsive below 60MHz
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25448 a1c6a512-1295-4272-9138-f99709370657
Brightness changes on the Fuzev2 now work flawlessly
This might also explain why my Clip+ would sometimes "not boot", that
could have been because the backlight was not enabled at all.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25445 a1c6a512-1295-4272-9138-f99709370657
Move class-less functions in utils.cpp into a new Utils class and make the old
functions static. This prevents clashes with system C functions. Rename some
functions to avoid macro problems (check() is a macro on OS X). Split out the
RockboxInfo class into a separate file.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25441 a1c6a512-1295-4272-9138-f99709370657
Rockbox Utility doesn't support "proxy auto-config" (aka PAC) for system proxy
settings. This can result in users selecting system proxy and expecting it to
work even if their system uses PAC. While the configuration dialog displays the
proxy setting values retrieved from the system this is not totally obvious. Add
a message telling if the retrieved system proxy values are not useable. For now
this only checks if a proxy host and port are set which should catch the usual
cases when PAC is used.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25435 a1c6a512-1295-4272-9138-f99709370657
Don't listen to requestFinished() signals for background downloads. The
only information needed is the done() signal. Fixes multiple error
messages popping up on unreachable network.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25430 a1c6a512-1295-4272-9138-f99709370657
Select (B)ootchart in advanced options in configure, and logf will record timings for various stages of boot, for performance comparisons. Format logged is:
BC:>function_name,123,80
where 123 is the line number, 80 is the number of ticks since boot. This can be loaded as CSV into a spreadsheet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25426 a1c6a512-1295-4272-9138-f99709370657
Move scrollwheel parsing function into separate file as it's reused.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25425 a1c6a512-1295-4272-9138-f99709370657
