After a discussion mixed on mailing list and irc, it was agreed that
more abstraction for plugins is better (so developers don't have to add
a check to HAVE_DISK_STORAGE when writing disk-specific code)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21923 a1c6a512-1295-4272-9138-f99709370657
storage_sleep, storage_spin, storage_spindown are only defined if #defiend (HAVE_DISK_STORAGE), not for MMC/ATA/SD
remove already unneeded nand_disk_is_active, nand_soft_reset
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21912 a1c6a512-1295-4272-9138-f99709370657
* Ingenic SD driver: cleanup DMA part a bit (not working yet)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21606 a1c6a512-1295-4272-9138-f99709370657
Replace most references to MMC/mmc with SD/sd
Remove MMC failover code since MMC cards aren't supported
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21604 a1c6a512-1295-4272-9138-f99709370657
ingenic SD driver needs more cleanup so it still doesn't use the common code
correct a comment in hotswap.c: card_extract_bits assume most significant word of register first (so, use this order)
fix debug menu which used MMC specific commands / bits positions in csd/cid
move the default block size of 512 into sd.h
move the mantissa & exponent table into a single file (sd.c) to reduce binsize. we don't need to export it anymore anyway
TODO : ingenic cleanup (will happen soon so building sd.c is not conditional)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21601 a1c6a512-1295-4272-9138-f99709370657
Put specific members under #ifdef (CONFIG_STORAGE & STORAGE_xx) (2 members for SD and 1 for MMC)
Fix a typo: tsac doesn't exist and must be read taac
Move card_get_info functions declaration inside hotswap.h to remove mutual inclusion of ata_mmc.h and hotswap.h
Move static const data structures from SD drivers into sd.h (sd_exponent and sd_mantissa)
Fix sd_command prototypes in SD drivers (card registers are unsigned long)
Fix speed calculation in Sansa AMS driver (PP SD driver needs to be checked)
Move ata-sd-target.h to sd-pp-target.h to reflect the PP specifity. Now it only contains declaration of microsd_int()
Remove unused ata-sd-target.h for injenic
TODO:
- check if CSD register bits are extracted correctly in PP driver
- correctly define read_timeout and write_timeout unit for MMC & SD, and use timeouts in Sansa AMS driver
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21586 a1c6a512-1295-4272-9138-f99709370657
Note : SH has TIMER_FREQ defined to CPU_FREQ, so any code wanting it must include #config.h before #cpu.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21560 a1c6a512-1295-4272-9138-f99709370657
Add an argument int_prio to TIMER_START() macro because SH7034 needs it
Leaves a target specific code in timer_register (could be given to target code through timer_set and __timer_set() )
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21556 a1c6a512-1295-4272-9138-f99709370657
registering and unregistering are handled by the non target-specific functions of timer.c
Remove arguments from the new TIMER_START since they are unused by targets
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21553 a1c6a512-1295-4272-9138-f99709370657
* Add support for the VX777
* Remove the touchscreen mode switching combo from the button driver
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21379 a1c6a512-1295-4272-9138-f99709370657
This needs support for usb interrupt transfers, so there are some changes in various USB drivers as well (only usb-drv-arc supports it at this point, others won't have working HID yet).
HID is disabled for now, as the apps/ part is not included yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20962 a1c6a512-1295-4272-9138-f99709370657
* Add YUV support
* Clean up LCD driver a bit and speed it up
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20730 a1c6a512-1295-4272-9138-f99709370657
* Optimize & cleanup thread handling a bit
* Unify exception return and fix a potential bug
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20659 a1c6a512-1295-4272-9138-f99709370657
a) lcd_enabled() is now lcd_active(), and is available for HAVE_LCD_SLEEP only targets (e.g. ipod video) too. It was depandent on HAVE_LCD_ENALE only before
b) rename the hook accordingly, and implement the hook for other other targets too (e.g. the clip [the only mono target with lcd_enable/lcd_sleep yet, so the code is still in the lcd driver], ipod, fuze, c200)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20331 a1c6a512-1295-4272-9138-f99709370657
* Add Onda VX767 SADC driver
* Unify Onda VX747(+) and Onda VX767 backlight driver
* Also be more consistent wrt file naming.
* Add speaker-onda_vx747.c to SOURCES (forgot to commit this)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20259 a1c6a512-1295-4272-9138-f99709370657
* Add initial RoLo support
* Don't enable IRAM in plugins for now
* Initial try at getting PCM working (doesn't crash anymore at least)
* Replace hard-coded constant with #define in usb-jz4740
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20115 a1c6a512-1295-4272-9138-f99709370657
* Fix USB issues + add DMA support (doesn't work fully)
* Make exception handler a bit more descriptive
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20091 a1c6a512-1295-4272-9138-f99709370657
* Rework battery reading
* Get power off back working
* Add time to debug view
* Convert TABs to spaces in firmware/export/mips*.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20024 a1c6a512-1295-4272-9138-f99709370657
* Add missing mmu-mips.h change
Onda VX747:
* Correct USB power handling
* Improve NAND handling
* Other minor fixes
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19921 a1c6a512-1295-4272-9138-f99709370657
* Add assembly optimised variants for memcpy, memset and find_first_set_bit
* Add option to map_address in MMU to set caching algorithm
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19920 a1c6a512-1295-4272-9138-f99709370657
* Implement lcd_flip()
* Add support for multiple banks in NAND driver
* Add basic I²C driver (untested)
* Get audio back working
* Add power driver
* Other minor fixes and cleanups
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19863 a1c6a512-1295-4272-9138-f99709370657
* Get USB working (it isn't good at writing support though)
* Clean up NAND & SD a bit
* Other comments/fixes
Ingenic Jz4740/MIPS:
* Split MMU from system
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19815 a1c6a512-1295-4272-9138-f99709370657
