It's nicer to look at and it obfuscated a bug where it should have
exited the loop instead of the case (you probably wouldn't observe
the effect very often).
Change-Id: I33f3c72c8bb7e11b9d418f66cf84efc3082a37b4
Anything of one dot and one character (e.g. ".a") would get treated as
"." because I left out a condition when converting to recursionless
parsing of relative components. Git 'er fixed up.
Change-Id: Id5603ce0858b419dc08b1d496b4b187a573595f9
This patch redoes the filesystem code from the FAT driver up to the
clipboard code in onplay.c.
Not every aspect of this is finished therefore it is still "WIP". I
don't wish to do too much at once (haha!). What is left to do is get
dircache back in the sim and find an implementation for the dircache
indicies in the tagcache and playlist code or do something else that
has the same benefit. Leaving these out for now does not make anything
unusable. All the basics are done.
Phone app code should probably get vetted (and app path handling
just plain rewritten as environment expansions); the SDL app and
Android run well.
Main things addressed:
1) Thread safety: There is none right now in the trunk code. Most of
what currently works is luck when multiple threads are involved or
multiple descriptors to the same file are open.
2) POSIX compliance: Many of the functions behave nothing like their
counterparts on a host system. This leads to inconsistent code or very
different behavior from native to hosted. One huge offender was
rename(). Going point by point would fill a book.
3) Actual running RAM usage: Many targets will use less RAM and less
stack space (some more RAM because I upped the number of cache buffers
for large memory). There's very little memory lying fallow in rarely-used
areas (see 'Key core changes' below). Also, all targets may open the same
number of directory streams whereas before those with less than 8MB RAM
were limited to 8, not 12 implying those targets will save slightly
less.
4) Performance: The test_disk plugin shows markedly improved performance,
particularly in the area of (uncached) directory scanning, due partly to
more optimal directory reading and to a better sector cache algorithm.
Uncached times tend to be better while there is a bit of a slowdown in
dircache due to it being a bit heavier of an implementation. It's not
noticeable by a human as far as I can say.
Key core changes:
1) Files and directories share core code and data structures.
2) The filesystem code knows which descriptors refer to same file.
This ensures that changes from one stream are appropriately reflected
in every open descriptor for that file (fileobj_mgr.c).
3) File and directory cache buffers are borrowed from the main sector
cache. This means that when they are not in use by a file, they are not
wasted, but used for the cache. Most of the time, only a few of them
are needed. It also means that adding more file and directory handles
is less expensive. All one must do in ensure a large enough cache to
borrow from.
4) Relative path components are supported and the namespace is unified.
It does not support full relative paths to an implied current directory;
what is does support is use of "." and "..". Adding the former would
not be very difficult. The namespace is unified in the sense that
volumes may be specified several times along with relative parts, e.g.:
"/<0>/foo/../../<1>/bar" :<=> "/<1>/bar".
5) Stack usage is down due to sharing of data, static allocation and
less duplication of strings on the stack. This requires more
serialization than I would like but since the number of threads is
limited to a low number, the tradoff in favor of the stack seems
reasonable.
6) Separates and heirarchicalizes (sic) the SIM and APP filesystem
code. SIM path and volume handling is just like the target. Some
aspects of the APP file code get more straightforward (e.g. no path
hashing is needed).
Dircache:
Deserves its own section. Dircache is new but pays homage to the old.
The old one was not compatible and so it, since it got redone, does
all the stuff it always should have done such as:
1) It may be update and used at any time during the build process.
No longer has one to wait for it to finish building to do basic file
management (create, remove, rename, etc.).
2) It does not need to be either fully scanned or completely disabled;
it can be incomplete (i.e. overfilled, missing paths), still be
of benefit and be correct.
3) Handles mounting and dismounting of individual volumes which means
a full rebuild is not needed just because you pop a new SD card in the
slot. Now, because it reuses its freed entry data, may rebuild only
that volume.
4) Much more fundamental to the file code. When it is built, it is
the keeper of the master file list whether enabled or not ("disabled"
is just a state of the cache). Its must always to ready to be started
and bind all streams opened prior to being enabled.
5) Maintains any short filenames in OEM format which means that it does
not need to be rebuilt when changing the default codepage.
Miscellaneous Compatibility:
1) Update any other code that would otherwise not work such as the
hotswap mounting code in various card drivers.
2) File management: Clipboard needed updating because of the behavioral
changes. Still needs a little more work on some finer points.
3) Remove now-obsolete functionality such as the mutex's "no preempt"
flag (which was only for the prior FAT driver).
4) struct dirinfo uses time_t rather than raw FAT directory entry
time fields. I plan to follow up on genericizing everything there
(i.e. no FAT attributes).
5) unicode.c needed some redoing so that the file code does not try
try to load codepages during a scan, which is actually a problem with
the current code. The default codepage, if any is required, is now
kept in RAM separarately (bufalloced) from codepages specified to
iso_decode() (which must not be bufalloced because the conversion
may be done by playback threads).
Brings with it some additional reusable core code:
1) Revised file functions: Reusable code that does things such as
safe path concatenation and parsing without buffer limitations or
data duplication. Variants that copy or alter the input path may be
based off these.
To do:
1) Put dircache functionality back in the sim. Treating it internally
as a different kind of file system seems the best approach at this
time.
2) Restore use of dircache indexes in the playlist and database or
something effectively the same. Since the cache doesn't have to be
complete in order to be used, not getting a hit on the cache doesn't
unambiguously say if the path exists or not.
Change-Id: Ia30f3082a136253e3a0eae0784e3091d138915c8
Reviewed-on: http://gerrit.rockbox.org/566
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
After a local commit, any file that included version.h would have to
be recompiled on account of the changed version string. This changes
version.h in the build directory to rbversion.h and includes the
preprocessor macro from rbversion.h in firmware/common/version.c so
that only that one file needs to be recompiled after a local commit
rather than a whole slew of them.
Change-Id: I900d97e3a24a0610698283416d97b4fa3a3a2cf6
Reviewed-on: http://gerrit.rockbox.org/937
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
Forms implemented to a greater or lesser degree at the moment:
ll_* = singly-linked list
lld_* = doubly-linked list
lldc_* = doubly-linked circular list
Change-Id: Ieed5af50fc59165c8b14c3513b3b5d0e6f7de9fa
This doesn't touch external tools as I see no need for.
Change-Id: Ia69248c4b6a033c3772916525257e3540bddcffa
Reviewed-on: http://gerrit.rockbox.org/891
Tested: Sebastian Leonhardt <sebastian.leonhardt@web.de>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
A missing comma messed the lookup table up :'( Be aware that the kernel
on the ypr0 doesn't support many codepages in which case its default (iso8859)
will be used.
Change-Id: Iaa4a4b8338fb047d29f6a4e2a80eba5c296d27ce
"/" couldn't be opened. This regression was introduced by 731072d. Trailing
slash should not be stripped for the root directory.
Change-Id: Idd2d9b1f33e7be789bcf432e586e6715eb4152f4
This is needed for readdir() and dir_get_info() to work properly because
they depend on hash/path matching.
Change-Id: Ibd23def10eebabd76cdddac2739a5274159e88a9
It's quite rare that it is called for a symlink to a directory. But it only
needs a second syscall to stat() if that happened. Therefore speed up the
common case by avoiding an unecessary second syscall.
Change-Id: I911105f76631ebccc7696a1540e9cf069a706000
The two functions need to check whether they are called for a specific path
to implement the virtual mount point for the external storage. This
is statistically rare and a hit on the common case. Therefore speed up
the common case by performing integer comparision first, and only expensive
string construction and comparision if that succeeds.
Change-Id: I3c41fe073e1f4f8eb62d2b8556a36937c9cb8290
A thread polls the appropriate GPIO pin for sd card presence and mounts
using the mount system call.
Change-Id: I31ab41c4120f4af64eb6998b7e7b6f9051585efb
Part of this change is to align sdlapp builds to other application targets
in that the sim_* wrappers are not used anymore (except for sim_read/write).
Path mangling is now done in rbpaths.c as well.
Change-Id: I9726da73b50a83d9e1a1840288de16ec01ea029d
The iocharset mount option names the codepages slightly differently and
must be translated properly.
Change-Id: I147a256e3453136282244201c27225a30cdfdca0
This is the basic port to the new target Samsung
YP-R1, which runs on a similar platform as YP-R0.
Port is usable, although there are still
some optimizations that have to be done.
Change-Id: If83a8e386369e413581753780c159026d9e41f04
This should catch the case of buffer misuse which results
in corrupted cookie of next allocation. The check is performed
on move_block() so it may be a bit late.
There is buflib_check_valid() provided which checks the
integrity of all cookies for given context.
On DEBUG build with --sdl-thread this check is carried out
for core_ctx on every context switch to catch problems earlier.
Change-Id: I999d4576084592394e3dbd3bdf0f32935ff5f601
Reviewed-on: http://gerrit.rockbox.org/711
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
The code was trying to probe for volume presence by calling drive layer
with volume index. It is a miracle it get unnoticed so far. Introduce
proper volume probing using the vol->drive map in the disk layer.
Change-Id: I463a5bcc8170f007cad049536094207d2ba3c6fc
Reviewed-on: http://gerrit.rockbox.org/669
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
When using variadic macros there's no need for IF_MD2/IF_MV2 to deal
with function parameters. IF_MD/IF_MV are enough.
Throw in IF_MD_DRV/ID_MV_VOL that return the parameter if MD/MV, or 0
if not.
Change-Id: I7605e6039f3be19cb47110c84dcb3c5516f2c3eb
The idea is to share loading code between bootloaders and rolo().
Change-Id: I1656ed91946d7a05cb7c9fa7a16793c3c862a5cd
Reviewed-on: http://gerrit.rockbox.org/190
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
It was also broken functionally, probably since a while.So restore the
functionality. Run it on the dap, the tcd files will be placed into .rockbox folder.
Change-Id: Id7a6ce4389dfaf99799258902be80d630af0601c
In Europe Windows defaults to its own codepage cp1252 (also known as "WinLatin"
or "Windows-1252"). cp1252 adds some characters to ISO-8859-1.
Some mp3 tagging software on Windows uses cp1252 instead of ISO-8859-1. This
violates the ID3 specification, which requires tags to be ISO-8859-1 or
Unicode. However, similar violations are made for other codepages and supported
by Rockbox using the "Default Codepage" setting. Add support for cp1252 to
enable people using such broken tools to override the correct decoding to get
their tags displayed properly.
Change-Id: I9f2ec478afe2503e99ee8e6609416c92b0f453e0
Reviewed-on: http://gerrit.rockbox.org/209
Reviewed-by: Jens Arnold <amiconn@rockbox.org>
Tested-by: Jens Arnold <amiconn@rockbox.org>
HOME_DIR is intended for not-so-advanced files which shall be user
visible, and thus not in /.rockbox. Therefore HOME_DIR is translated
to $HOME on RaaA, /sdcard on android, the internal memory on ypr0
and "/" on native targets.
ROCKBOX_DIR ("/.rockbox") already existed as special and is translated
to whatever the real rockbox dir is on the target (e.g. /sdcard/rockbox
on android), but it's not suitable for some files we generate
(e.g. battery-bench.txt).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31430 a1c6a512-1295-4272-9138-f99709370657
This port is a hybrid native/RaaA port. It runs on a embedded linux system,
but is the only application. It therefore can implement lots of stuff that
native targets also implement, while leveraging the underlying linux kernel.
The port is quite advanced. User interface, audio playback, plugins work
mostly fine. Missing is e.g. power mangement and USB (see SamsungYPR0 wiki page).
Included in utils/ypr0tools are scripts and programs required to generate
a patched firmware. The patched firmware has the rootfs modified to load
Rockbox. It includes a early/safe USB mode.
This port needs a new toolchain, one that includes glibc headers and libraries.
rockboxdev.sh can generate it, but e.g. codesourcey and distro packages may
also work.
Most of the initial effort is done by Lorenzo Miori and others (on ABI),
including reverse engineering and patching of the original firmware,
initial drivers, and more. Big thanks to you.
Flyspray: FS#12348
Author: Lorenzo Miori, myself
Merry christmas to ypr0 owners! :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31415 a1c6a512-1295-4272-9138-f99709370657
Without an RTC, Rockbox doesn't keep time. In that situation, USB time sync
previously did nothing but reported success. After this change, the USB time
sync request won't be recognized on those targets.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31319 a1c6a512-1295-4272-9138-f99709370657
Don't build str(n)casecmp as functions if they are already defined by preprocessor
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31147 a1c6a512-1295-4272-9138-f99709370657
Now all threads need to ack the connection like on real target, dircache is unloaded and playback stops accordingly.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31009 a1c6a512-1295-4272-9138-f99709370657
When booting with USB inserted, the dircache build can get interrupted by the usb connection, in which case the dircache buffer is freed.
Due to a bug the re-creation of dircache used the old freed buffer and overwrite new allocs (causing screen corruption).
Set allocated_size to 0 to make it not take the code path that assumes an existing buffer,
and bring that and freeing together in the code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30845 a1c6a512-1295-4272-9138-f99709370657
If we aren't going to check for the partition type, we don't need the array of
known FAT partition types.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30567 a1c6a512-1295-4272-9138-f99709370657
Instead of only mounting partitions with a FAT partition type, try any
partition that isn't type 0 (unallocated) or 5 (extended). This makes it easier
to reformat SDXC cards which have the exFAT partition type, and also brings us
in line with pretty much every other OS at this point. Anything with a
valid-looking FAT superblock will get mounted.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30566 a1c6a512-1295-4272-9138-f99709370657
Also add two dircache function, one of which does what dircache_disable()
did previously as this now also frees the dircache buffer.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30393 a1c6a512-1295-4272-9138-f99709370657
This enables the ability to allocate (and free) memory dynamically
without fragmentation, through compaction. This means allocations can move
and fragmentation be reduced. Most changes are preparing Rockbox for this,
which many times means adding a move callback which can temporarily disable
movement when the corresponding code is in a critical section.
For now, the audio buffer allocation has a central role, because it's the one
having allocated most. This buffer is able to shrink itself, for which it
needs to stop playback for a very short moment. For this,
audio_buffer_available() returns the size of the audio buffer which can
possibly be used by other allocations because the audio buffer can shrink.
lastfm scrobbling and timestretch can now be toggled at runtime without
requiring a reboot.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30381 a1c6a512-1295-4272-9138-f99709370657
The buflib memory allocator is handle based and can free and
compact, move or resize memory on demand. This allows to effeciently
allocate memory dynamically without an MMU, by avoiding fragmentation
through memory compaction.
This patch adds the buflib library to the core, along with
convinience wrappers to omit the context parameter. Compaction is
not yet enabled, but will be in a later patch. Therefore, this acts as a
replacement for buffer_alloc/buffer_get_buffer() with the benifit of a debug
menu.
See buflib.h for some API documentation.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30380 a1c6a512-1295-4272-9138-f99709370657
If the dircache was interrupted during generation (e.g. through USB
insertion), then the allocated buffer was leaked and a new one
was allocated for the second cache generation. This causes a
panic since r30308 since playback holds the control over the
audiobuffer at that time.
The fix is to simply check allocated_size instead of
dircache_size which is reset to 0 upon cancellation.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30321 a1c6a512-1295-4272-9138-f99709370657
dircache_root wasn't initialized at all and the giving allocated_size
passed to buffer_release_buffer() didn't account for alignment padding.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30318 a1c6a512-1295-4272-9138-f99709370657
Namely, introduce buffer_get_buffer() and buffer_release_buffer().
buffer_get_buffer() aquires all available and grabs a lock, attempting to
call buffer_alloc() or buffer_get_buffer() while this lock is locked will cause
a panicf() (doesn't actually happen, but is for debugging purpose).
buffer_release_buffer() unlocks that lock and can additionally increment the
audiobuf buffer to make an allocation. Pass 0 to only unlock if buffer was
used temporarily only.
buffer_available() is a replacement function to query audiobuflen, i.e. what's
left in the buffer.
Buffer init is moved up in the init chain and handles ipodvideo64mb internally.
Further changes happened to mp3data.c and talk.c as to not call the above API
functions, but get the buffer from callers. The caller is the audio system
which has the buffer lock while mp3data.c and talk mess with the buffer.
mpeg.c now implements some buffer related functions of playback.h, especially
audio_get_buffer(), allowing to reduce #ifdef hell a tiny bit.
audiobuf and audiobufend are local to buffer.c now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30308 a1c6a512-1295-4272-9138-f99709370657
The first is an off-by-one that leads to miscalculation of the dircache size.
The format string size was used but dircache size was incremented by the snprintf() result which is smaller.
The other forgot to update the location of the "." and ".." strings upon compaction,
so that new folders got assigned orphaned pointers for those directory entires.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30224 a1c6a512-1295-4272-9138-f99709370657
bsearch() is a general purpose binary search function for arrays.
It's supposedly faster than looping over arrays.
The array needs to be sorted in ascending order under the provided
comparison function. If the key and array element are of the same kind,
then the same compare function can be used for qsort() and bsearch().
Code taken from glibc.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30155 a1c6a512-1295-4272-9138-f99709370657
prevent d_names data from being overwritten (likely causing garbage in
file browser and other strange symptoms).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30122 a1c6a512-1295-4272-9138-f99709370657
Only integer IDs are exposed from dircache with this. This way the cache is isolated from other modules.
This is needed for my buflib gsoc project.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30038 a1c6a512-1295-4272-9138-f99709370657
The dircache_entry structs are now allocated subsequently from the front, allowing to treat them as an array. The d_names are allocated from the back (in reverse order, growing downwards).
This allows the cache to be moved around (needed for my buflib gsoc project). It is utilized when loading the cache from disk (on the h100), now the pointer to the cache begin doesn't need to be the same across reboots anymore.
This should save a bit memory usage, since there's no need for aligning padding bytes after d_names anymore.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30036 a1c6a512-1295-4272-9138-f99709370657
Use a recursive helper function with strlcat to build up the path backwards. This way the tree doesn't need to be walked twice and no extraneous size calculation is needed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30033 a1c6a512-1295-4272-9138-f99709370657
It's reduntant, and enlarges the dircache unnecessarily. Saves 4 byte per file in the whole filesystem.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30032 a1c6a512-1295-4272-9138-f99709370657
More information: www.openpandora.org
Possible things to implement:
- Special button mappings
- Battery monitoring
- ALSA audio backend
- Automate creation of "pnd" (=binary) file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29451 a1c6a512-1295-4272-9138-f99709370657
Adds Nokia N900, N810 and N800 support.
Features:
- Introduce maemo specific platform defines
- Play audio in silent mode
- Stop playback on incoming calls
- Battery level readout
- Bluetooth headset support
- Save CPU by disabling screen updates if the display
is off or the app doesn't have input focus
- N900: GStreamer audio backend
Kudos to kugel for the code review.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29248 a1c6a512-1295-4272-9138-f99709370657
The code in tagcache.c:commit() was unable to delete
the to-be-commited database file as it read from
$(HOME)/.config/rockbox.org and tried to delete
the file later on in /.rockbox/.
As we didn't specify any flags like IS_FILE or NEED_WRITE
in _get_user_file_path() (which is called by f.e. app_remove()),
it searched for the file in two places.
In case of app_rename() IS_FILE would be wrong, so we just
add a NEED_WRITE to any write operation.
Author: Thomas Jarosch
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29148 a1c6a512-1295-4272-9138-f99709370657
Unmount all filesystems before connecting USB. This ensures that all filehandles are closed, which avoids possible filesystem corruption
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28693 a1c6a512-1295-4272-9138-f99709370657
- %s was missing the argument (function name)
- add %p to print the function argument
- also don't call strlen() to test string nullity (and strlen() can't return a negative result)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28123 a1c6a512-1295-4272-9138-f99709370657
Use host's functions for file i/o directly (open(), close() ,etc.), not the sim_* variants.
Some dir functions need to be wrapped still because we need to cache the parents dir's path (host's dirent doesn't let us know).
For the same reason (incompatibility) with host's dirent) detach some members from Rockbox' dirent struct and put it into an extra one,
the values can be retrieved via the new dir_get_info().
Get rid of the sim_ prefix for sleep as well and change the signature to unix sleep().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27968 a1c6a512-1295-4272-9138-f99709370657
General state is: Rockbox is usable (plays music, saves configuration, touchscreen works too).
Problems:
- Playing music in the background (i.e. when switching to another app) doesn't work reliably, but I'm working on that now.
- no cabbiev2 (only some preliminary files for it), no other default theme.
- screen flickers sometimes if the updates are too frequent
- no multi screen apk/package
- strange behavior when a phone call comes in
The java files (and the eclipse project) resides in android/, which is also supposed to be the build folder.
I've put a small README in there for instructions. There are some steps needed after the make part, which are described there,
and which eclipse mostly handles. But there ought to be some script/makefile rules which do that instead in the future.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27668 a1c6a512-1295-4272-9138-f99709370657
For RaaA it evaluates user paths at runtime. For everything but codecs/plugins it will give the path under $HOME/.config/rockbox.org if write access is needed or if the file/folder in question exists there (otherwise it gives /usr/local/share/rockbox).
This allows for installing themes under $HOME as well as having config.cfg and other important files there while installing the application (and default themes) under /usr/local.
On the DAPs it's a no-op, returing /.rockbox directly.
Not converted to use get_user_file_path() are plugins themselves, because RaaA doesn't build plugins yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27656 a1c6a512-1295-4272-9138-f99709370657
Remove four remaining uses of %z, three of which were in DEBUGF
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27479 a1c6a512-1295-4272-9138-f99709370657
The simulator defines PLATFORM_HOSTED, as RaaA will do (RaaA will not define SIMULATOR).
The new define is to (de-)select code to compile on hosted platforms generally.
Should be no functional change to targets or the simulator.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27019 a1c6a512-1295-4272-9138-f99709370657
- fix check_event_queue to use queue_peek and not mess message order
- change check_dircache_state to a more modest check to avoid messing up dircache state
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26228 a1c6a512-1295-4272-9138-f99709370657
it might be valid C but is confusing, and not consistent with the rest of file.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26191 a1c6a512-1295-4272-9138-f99709370657
This sort of change should never go in without prior discussion or consensus
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26071 a1c6a512-1295-4272-9138-f99709370657
This is to a) to cleanup firmware/common and firmware/include a bit, but also b) for Rockbox as an application which should use the host system's c library and headers, separating makes it easy to exclude our files from the build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25850 a1c6a512-1295-4272-9138-f99709370657
- Move diacritic.c to firmware/common
- The function is_diacritic returns bool now
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25526 a1c6a512-1295-4272-9138-f99709370657
Lots of the changes are due to changing storage_(read|write)sectors() from macros to wrapper functions. This means that they have to be called with IF_MD2(drive,) again.
Flyspray: FS#11167
Author: Frank Gevaerts
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25459 a1c6a512-1295-4272-9138-f99709370657
-Move fat_dir structure out of dircache stack to RAM. Reduce dircache stack size (max level depth should stay be around 20). This should fix nano2g dircache stkov of FS#10679
-Change the structure returned by readdir_cached to match the one returned by readdir_uncached: remove useless fields to save space and avoid any potential incoherence
-Remove one field from the internal structure used by {opend,read,close}dir_cached because it was mostly redundant.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24708 a1c6a512-1295-4272-9138-f99709370657
Change the RTC drivers so that the rtc_(read|write)_datetime functions now deal directly with the tm struct instead of passing a string of bcd digits to/from (set|get)_time .
This simplifies drivers for rtc's that do not use a bcd representation internally and cleans up some target specific code and #ifdefs in generic code. Implement simple stubs for the sim to avoid #ifdefing for that too.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22839 a1c6a512-1295-4272-9138-f99709370657
