Atmel AT88SC6416C CryptoMemory is almost I2C compatible. The device
is connected to bitbanged I2C bus shared with compliant I2C devices.
Change-Id: Iec54702db1bdfb93c01291eef18ec60391c63b16
Reducing number of fake RX buffers saves a bit more than 127 KiB RAM.
Fix compilation with CPPI logging enabled.
Change-Id: If1ad3a6fc251e284caaac78c2406a58f3d6547bb
AVR interrupt signal can remain active if the state has changed during
state read. In such case, there won't be intterupt and the interface
would appear unresponsive until AVR thread received event (e.g. USB
connection/disconnect). Solve the issue by not waiting for event if AVR
interrupt signal is active prior to event wait.
Change-Id: I86e388c7cd6da76e3abe7bf7114940f331e4c308
Make it possible for target to provide voltage, percentage and time to
empty values. The voltage measurement is nice to have in debug menu even
if the actions are taken only based on percentage. Perform battery level
estimation based on voltage only if percentage is not available.
Use time to empty based on actual power consumption. This makes the
estimated runtime displayed in Rockbox Info to react to backlight
setting. The bq27000 updates time to empty estimate every 5.12 seconds
so it is possible to see the estimate with backlight off on the screen
if user enters Rockbox Info, activates hold switch, waits 11 seconds and
releases the hold switch.
Change-Id: Iafe3fa0fb334e3428e3a0ad05b2c020d208dc934
Prevent startup screen flash by properly using AVR LCM functions. Power
off LCD when not needed to improve battery runtime.
Change-Id: I76e3c5c0208774f189fbc6f7d7b3c9e22c062285
Queue power off requests because power_off() can be called within tick
context that must not acquire mutex.
Change-Id: I6f1a8f81d15518876cd03556118fc9eb37b8175f
Import non-free firmware image from linux-firmware package.
Firmware loading works but is disabled at compile time because just
loading firmware without configuring device results in higher power
consumption without any benefit to end user.
Change-Id: I8fd252c49385ede1ea4e0f9b1e29adeb331ab8ae
Waiting 10 us between selecting slave and transmitting data on SPI
resolves spurious startup glitches.
Cache last read monotime value as it can differ from the first one.
Change-Id: Ia6ac5696f6ee2bc3c6a8be27e33aaddd9ff4ce2a
Read monotime twice in a row and only accept the value if it matches or
the two reads are 1 second apart.
Change-Id: Ibd289103a20404dd1b2bbd131fdfa8905852c788
AVR requires bigger delays between retries. Read state instead of
version for synchronization purposes as it shifts more bytes.
Change-Id: Ib7fa980496d3bc7744a086b45e1865861ef58b88
If the commands repeatedly fail it is likely that the AVR is not
programmed. In such case simply continue normal operation. This is
especially important in bootloader as it makes it possible to load new
rockbox build using bootloader USB mode. Otherwise, the only recovery
option would be to use I2C serial.
Change-Id: I4b0999833e9a906ec6353bdfdd5b68211f07ac81
Use 32-bit monotime AVR counter for time tracking. Set the time by
adding fixed offset to the counter value. Store the offset in rockbox
directory to make it persistent between reboots.
Do not implement alarm functionality as wakeup is only possible from
sleep and not from complete power off.
Change-Id: I615c7eb4df8ab0619dcbfcff107bc7051a15aace
Keep Slave Select active during command transmission. This relaxes
timing requirements on the AVR side.
Change-Id: Ia1a6cf45aba3c11f6aeaa7441c6793807ca827f0
Add defines for all commands handled by AVR, including the unknown
opcodes (0xC5, 0xD3, 0xD4, 0xD5, 0xD6).
Properly synchronize with AVR and keep repeating command until it looks
like AVR has accepted it.
Change-Id: I3d42e973f135e33092c71c9887421906a900ab58
Consider battery level down to 0 as safe as OF continues to operate
normally even when at level 0.
Change-Id: Ie3889e5662b9fa6588e20ad02d8953f29e28800c
Disabling double buffering results in expected CPPI TX behaviour. With
the double buffering enabled, sending single ZLP resulted in two ZLPs
being available. The two ZLPs is problematic because this causes Windows
to reset USB device after failed SCSI command.
The problematic sequence on Windows 10 was as follows:
* Host sends SCSI Mode Sense(6) Informational Exceptions Control(0x1C)
* Device sends ZLP
* Device sends command failed response
With endpoint double buffering enabled the ZLP was read twice by host.
As host was expecting command response on the second read (and got ZLP
instead), host attempts recovery by resetting USB device and retrying.
Change-Id: I64e95998f429ffb7b14143d956b1f29d20218d14
Acknowledge SYS_USB_CONNECTED in all queues so USB task can gain
exclusive access to the storage.
Reduce CPPI requeue timeout to speed up disk access.
Change-Id: I322aae4cac679696bb8186ccacf838a18f0715e9
Correctly set endpoint maximum packet size so host will not consider
end of transfer after receiving first packet when transfer is larger
than 64 bytes (at High Speed the endpoint max packet size was set to
64 but according to descriptor it is 512).
Split DMA transfers up to CPPI_MAX_FRAG so we get single interrupt
after each call to tnetv_cppi_send().
Change-Id: I385b66bc5d71975a4e3e9167efac0b1334bd3ffc
Port USB driver from Sansa Connect Linux kernel sources. The device
successfully enumerates and responds to SCSI commands but actual disk
access does not work. The SCSI response sent to host mentions that both
internal storage and microsd card are not present.
Change-Id: Ic6c07da12382c15c0b069f23a75f7df9765b7525
* pcm_get_bytes_remaining()
* pcm_calculate_peaks()
* pcm_get_peak_buffer()
Nothing in-tree uses these at all (except for the lua plugin wrapper)
Change-Id: I971b7beed6760250c8b1ce58f401a601e1e2d585
Nothing in the core has used it for some time. It's exported to the
plugin API but the last plugins to use it were switched to the mixer API
back in 2011.
This allows us to get rid of pcm_play_dma_pause() from all audio drivers
Change-Id: Ic3fa02592316f84963e41d792d1cabb436d1ff6b
Additional status callback is added to pcm_play/rec_data instead of
using a special function to set it. Status includes DMA error
reporting to the status callback. Playback and recording callback
become more alike except playback uses "const void **addr" (because
the data should not be altered) and recording uses "void **addr".
"const" is put in place throughout where appropriate.
Most changes are fairly trivial. One that should be checked in
particular because it isn't so much is telechips, if anyone cares to
bother. PP5002 is not so trivial either but that tested as working.
Change-Id: I4928d69b3b3be7fb93e259f81635232df9bd1df2
Reviewed-on: http://gerrit.rockbox.org/166
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
Change all lcd drivers to using a pointer to the static framebuffer
instead of directly accessing the static array. This will let us
later do fun things like dynamic framebuffer sizes (RaaA) or
ability to use different buffers for different layers (dynamic
skin backdrops!)
Change-Id: I0a4d58a9d7b55e6c932131b929e5d4c9f9414b06
move adc_close() prototype to adc.h
don't duplicate prototypes of adc.h
remove license header and guards for a single include of another file or for empty content
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31623 a1c6a512-1295-4272-9138-f99709370657
Only target-specific (list of SPI targets) go in spi-target.h
API go into spi.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31615 a1c6a512-1295-4272-9138-f99709370657
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
On this player EMIF is needed for accessing NOR flash. Disabling it improves battery runtime by about 25 minutes.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31373 a1c6a512-1295-4272-9138-f99709370657
This improves battery runtime on Sansa Connect by approximately 40 minutes.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31358 a1c6a512-1295-4272-9138-f99709370657
This improves framerate update (when uboosted, approximate values) from 151 fps to 911 fps for whole screen update and from 432 fps to 3017 fps for quarter screen update.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31357 a1c6a512-1295-4272-9138-f99709370657
Massage the way it interfaces a bit to make things more flexible.
The chroma_buf scheme on Sansa Connect and Creative ZVx calling the
lcd_write_yuv420_lines implementation in lcd-as-memframe.S with five params
with a chroma buffer that the function can't use wouldn't work anyway so just
have them use the stock implementation (really, how was that working?).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31335 a1c6a512-1295-4272-9138-f99709370657
This should prevent buffer underruns that can occur during heavy use of buttons or scrollwheel.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31267 a1c6a512-1295-4272-9138-f99709370657
