There should be no need for any compatibility hacks since this
value was mostly used internally between the SPL and bootloader.
clk_init() was the only user in the main Rockbox binary which
accessed it, but when loaded by the Rockbox bootloader that code
will not be reached since BOOT_FLAG_CLK_INIT is already set.
Change-Id: Idd68b9834172e652b47432bfb1e00c923ea35407
Removes the SPL's dual boot support code, and removes the dual
boot selection code on the M3K and Q1 since they can now do it
from the main bootloader.
Change-Id: Ie1b27e98c6ed4b3e37db86cfb485d6f3a6c5b25e
Screenshots of the recovery menu will be useful for documentation.
This can be disabled by turning off HAVE_BOOTLOADER_SCREENDUMP in
the target config file if the bootloader should ever run up against
max size limits.
Change-Id: I62ec1e465df2ca7a8a0e78625d88b31f6c4ef078
Bad blocks in a kernel flash partition seem to be handled by skipping
ahead to the next block; this is a common bad block management scheme
for simple software like bootloaders (and is the default method for
reading NAND partitions in u-boot).
Extend the uImage flash reader to skip bad blocks while reading.
Change-Id: I815875e83a2418e2642f736e04a3437c31b354ba
Add a debug menu to invoke two new actions, dumping the OF kernel
and recovery images from flash to the SD card.
Change-Id: I3ca943fac22e725a2d56b84d62f4a04821042fed
The M3K's kernel has an incredibly stupid function that mangles the
kernel args and copies them to a 100-byte buffer without any kind of
bounds checking. So, if the kernel arguments are more than 99 chars
the stack may be corrupted, sometimes crashing the kernel.
Fortunately, most of the arguments the OF uses are useless, and the
truly necessary arguments fit within the absurd 99-char limit.
Change-Id: I01ef4513298f79d3c08538239802c21e88509631
Basically, there's longstanding bug in Linux with self-extracting
kernels on MIPS which just happened to manifest now on the M3K as
a hang on boot. The fix is applied to the M3K and Q1 since they
both use this type of kernel image.
Change-Id: I17d2bad6eebd677cd6d2e0bf146450c71fcf1229
This adds a *very basic* Linux loader to the Rockbox bootloader,
which allows running a mainline Linux kernel using the following
file layout on the SD card:
- /uImage
- /linux_cmdline.txt
The command line arguments are listed in linux_cmdline.txt, all
lines are concatenated together and whitespace is converted into
spaces. Comments aren't supported however.
The loader doesn't support the modern devicetree boot protocol,
so it can only pass command line arguments. It would be easy to
support an appended dtb though.
Change-Id: I373f465dbbdafe94738f619748cbb0278fc2c25f
Adds the ability to boot the OF's player or recovery kernels
from the bootloader. Works on Shanling Q1 but broken on the
FiiO M3K (kernel hang) so leave it disabled for the M3K.
Change-Id: I26b973fba1c22afb906a78865963a96dd2107932
- Remove unused redefinitions of screen_dump() from bootloaders
- Use empty do-while when screendump is compiled out
Change-Id: I3ccdb0390ddaa28d8f561ff744d0db6aaef17f5d
Qt6 has QMultimedia, but QSound has been removed. It's only use for
playing a TTS test sample. Disable that for now.
Change-Id: Id3b5c834f9579a43e390c0c00a4c1a35b59182bd
- Fix regexp case insensitive option being inverted.
- Pass more objects by reference.
- Some const-ness.
Change-Id: I1c77ad22ab1e505c8dce8c083d9c52e76a6860be
I think the clipzip has the smallest screen at 96
might need to be enabled for LCD_WIDTH <=128 too
remove scrolling thread info for larger screens
Change-Id: Ic98c9fc0b53f79e90776c13429194f9c37c1d48b
apparently there are tags such as year or genre that are indexed 1 byte
apart, as much as I like the idea of this I cannot come up with a way
to reliably denote 2 16 bit entries from a single 32 bit entry without
losing data or adding bookkeeping which would likely make it pointless
Change-Id: I8a9908575700cab9506c36f5422222145557fa6b
Calling multiple levels of indirection in a loop slows things down
Really these need to be rewritten to take a start and end address
like most of the rest of the codebase
But this is safer without having test hardware in hand
Change-Id: Idae7b92ee779d020ed7fcc9334e2d5a9c710e64d
just a little cleanup of ft file filtering code
store result of filter mask to a local var
put skin apply code in its own function
Change-Id: Ib899608f64e36346b9bde07caa5d5ac29de05af9
decrease size hit of initializing asf by using a union
remove init from bytes LE conversion in metadata common
-- bad idea for performance
Change-Id: I4514adc125e5da2b99d9f913ba74afd5f1345822
QProgressDialog shows / hides itself automatically based on the progress
value set, so calling hide() directly doesn't prevent the dialog from
showing itself.
Change the logic to set a value instead. Fixes the progress dialog
sometimes appearing in situations where it wasn't used at all.
Change-Id: Ifef063f31b7f888bb74f180dea0679e81cc5c8fe
When communicating with Festival via socket don't assume readAll() would
read all data we expect. We can only read the data that has been sent by
the server so far, and this is not necessarily complete.
This notably improves the configuration dialog response and reliably.
Change-Id: I9a812f03df785fb3ad32783a8573a2c86dc317ed
Qt uses the systems certificate store. On old(er) systems the root
certificate might not be present, so checking the certificate from the
rockbox.org server might fail.
On startup we try to download the build-info file. If this fails with a
certificate error allow the user to temporarily accept the rockbox.org
certificate for all successive requests.
Change-Id: I459e12d53286aaedea4db659d90a5e057c56801f
new operators @^, @$
begins_oneof and ends_oneof
albumartist @^ "L|The L"
Led Zeppelin, The look
albumartist @$ "girls|Boys"
spice girls, beasty boys
Change-Id: I26ce3d8155d970a55e003f74e2f9478db76204f1
