FCLK is unused because we use fastbus clocking: CPU clock = PCLK
Base PCLK off PLLA and use the lowest frqeuency for FCLK (24MHz source,
maximum divider)
Save a bit of power, adjust Clipv1/e200v2/Fuzev1 current usage accordingly
Note: the power saving (in mA) is a bit less on e200v2/Fuzev1 than on Clipv1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28000 a1c6a512-1295-4272-9138-f99709370657
AMS*: define CURRENT_MAX_CHG to give more correct estimation of recharge time
The amount of current each target draws from the charger is defined in
powermgmt-target.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27994 a1c6a512-1295-4272-9138-f99709370657
- change buffer alignement to 32 bytes (not sure if it's useful)
- flush rx fifo on reset
- use AS3525_PHYSICAL_ADDR for DMA
- reset endpoints structure states on reset
- force full speed for debugging purpose
- add more debugging code
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27986 a1c6a512-1295-4272-9138-f99709370657
Seperate make rules in a almost empty android.make.
Also add forgotten powermgmt-android.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27977 a1c6a512-1295-4272-9138-f99709370657
Instead implement a bit of battery monitoring. Currently it only fetches the battery level (in %) every 30s,
but it could do more like battery status, charger connected, voltage...
Theoretically, we could also exit/quit after some time of inactivity too
(perhaps not a bad idea since Rockbox puts a slight but still non-zero CPU load even if doing nothing).
Ironically, Rockbox is now the only way to get the exact battery level (at least I haven't found anything yet) on my phone :-)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27974 a1c6a512-1295-4272-9138-f99709370657
Use host's functions for file i/o directly (open(), close() ,etc.), not the sim_* variants.
Some dir functions need to be wrapped still because we need to cache the parents dir's path (host's dirent doesn't let us know).
For the same reason (incompatibility) with host's dirent) detach some members from Rockbox' dirent struct and put it into an extra one,
the values can be retrieved via the new dir_get_info().
Get rid of the sim_ prefix for sleep as well and change the signature to unix sleep().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27968 a1c6a512-1295-4272-9138-f99709370657
Since memory on 32mb ipod videos is mapped twice, a 64mb build still has codecs and plugins mapped in a usable area. This means that all that needs to be done to support 32mb and 64mb boards with the same build is to adjust audiobufend to avoid using more than the actually present RAM.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27960 a1c6a512-1295-4272-9138-f99709370657
Without this change the backlight would be enabled but the screen would
show the last content displayed before the screen went off
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27957 a1c6a512-1295-4272-9138-f99709370657
This is the first step to allowing a single build which will work on any ipodvideo.
A global variable, probed_ramsize, is initialised to either 32 or 64 early in boot.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27937 a1c6a512-1295-4272-9138-f99709370657
ata-meg-fx: use unsigned line number, so % (modulo) is optimized
tcc7*: use proper printf format and remove casting
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27935 a1c6a512-1295-4272-9138-f99709370657
The driver is stable so we can use error codes for debugging
Fix 2 problems in error code path:
- release sd mutex
- release dma module when needed
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27915 a1c6a512-1295-4272-9138-f99709370657
Removes the need to fix up those in the simulator.
Also work around some posix-mingw incompatibilities (e.g. getcwd()).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27904 a1c6a512-1295-4272-9138-f99709370657
It's a used by codec/plugin loading and vastly reduces code duplication. It's also a step forward in getting rid of libuisimulator in the application ports.
Apparently sh needs linker symbols prefixed with _ even if they're referenced without from C code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27902 a1c6a512-1295-4272-9138-f99709370657
I don't understand the build error at all, plugin_bss_start is clearly defined in plugin.lds
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27901 a1c6a512-1295-4272-9138-f99709370657
It's a used by codec/plugin loading and vastly reduces code duplication. It's also a step forward in getting rid of libuisimulator in the application ports.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27900 a1c6a512-1295-4272-9138-f99709370657
%Fl now takes an optional 3rd param which is the number of glyphs to cache (default to 256). the smaller the number, the less ram will be used (i.e using 15 for a font which only shown numbers is a good idea)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27882 a1c6a512-1295-4272-9138-f99709370657
fix DMA buffers when the src/dst is in IRAM
It worked fine because all the buffers are in DRAM, and the virtual
address happens to be the physical address
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27876 a1c6a512-1295-4272-9138-f99709370657
