It makes it behave consistently with tree/playlists other menus. So it's possible to exit Shortcuts using Back button on Clip Zip or Power button on Rocker
Change-Id: I8a52422ed2d96d0727ddacf364f87878735c6e4c
The codec used 32-bit math for elapsed time <-> file position
calculations. The rounding errors seem to be the cause of poor
seek/resume accuracy on long VBR files; switching to 64-bit math
makes things much better.
Change-Id: Iba638d9e031a891022510c31c141cc4541e3f149
Resuming a track with "Resume Playback" or a bookmark is supposed
to pass both the file offset and elapsed time to the codec. Since
commit dfff938dff the offset has been getting zeroed because the
buffer handle wasn't open at the time of the buf_filesize() call,
causing it to return a negative error code.
Having a valid offset improves resume accuracy with some codecs,
like VBR MP3.
Change-Id: I8af7f001644f1ee1bd27ca3049a4cff2d2274149
It fixes Playback/Bookmarks Resume for long vbr mp3 files
It also fixes resume by time for asf files.
As a replacement for https://gerrit.rockbox.org/r/c/rockbox/+/4750
Change-Id: Iaa59b5862385f5fe91fdc2fb0b1fde8ce75c0b54
The File Browser and Database apparently share
the same selected_item_history, which means that
selected_item can be -1 even in the context of the
database,
This leads to tree_get_file_position being called in
id3db mode, which isn't safe to do.
Change-Id: I46151e8a823afab0b57ad839cde13f6072b8917b
The Q1 handles firmware updates by unpacking the firmware image
from the player app, then rebooting into the recovery kernel.
The recovery kernel reflashes the player kernel and rootfs with
the unpacked update files on the SD card.
Booting the recovery kernel directly is therefore not useful to
the vast majority of users; remove the option from the recovery
menu and remove the key combo.
Change-Id: I6cebfb6a3514ff2ae7d6f3904ac93b481773799b
It's now possible to install OF updates on a rockboxed Shanling Q1.
Previously these didn't work because the RB bootloader interrupted
the update process.
Updates will proceed as they normally do on a non-Rockboxed Q1,
except at the end of the update you'll reboot to Rockbox instead
of the OF. This is only a minor inconvienience and doesn't affect
the update process.
Change-Id: I0f8fc96f073c50c1512bf60e0927491be8178eb0
The bootloader backup is intentionally simple, but it's a little
*too* simple. Add a sanity check to make sure what we're backing
up or restoring contains the first 8 bytes of the SPL header.
This isn't going to catch all possible problems, but it'll stop
obviously non-functional backups from being restored.
Change-Id: I6e80351aeb96c467f0514bd0ecd77d94ff72a8f8
The current value of 32 per handle seems excessive. Buflib overhead
per handle is only 20 bytes and a single shortcut is > 500 bytes.
Reducing SHORTCUTS_PER_HANDLE means that minimum memory usage can
be lower when there are a few shortcuts, at the cost of marginally
increased usage for large numbers of shortcuts. This is helpful to
keep memory usage under control for low-memory targets, where 16 KiB
is almost 1% of system RAM!
Change-Id: I47dbe0da874ae512cf50a0bd8350576ab2fabdf4
32 bytes is a little small, and it's also good to have extra
space to accommodate non-English languages.
Change-Id: Iced38fd5140e219b16dcfa6d30cc4191266926bd
Offers a quick way of switching to the Shortcuts Menu
by pressing the 'context menu' button while QuickScreen
is active (e.g. long press Select on iPods and some other
players)
Change-Id: I38292c7070cf093a81e1db688809b1f0d6a8764a
- Fix FPS counter overlapping
the artist string when
"Show album title" was set to
"Show album and artist at the top"
- Fix disappearance of center album
if certain Settings menus had been
accessed while list of tracks was
showing and you then returned to the
list of albums
- Fix disappearing album artwork after
cache had been created until you started
scrolling
- Enable context menu even if WPS
integration is disabled
- Make splash screen appear only
on first launch and for database
updates, when it is actually on screen
for long enough
- Eliminate 'Loading' splash if tagcache
is in RAM
- Show both album and artist by default on
displays whose height > 100px
Change-Id: Ie70c0d9093789294d288a4f88338ee4a588bf4a5
- With "Play Selected First" and "Shuffle" enabled,
another item was randomly selected when returning
to the list. This appears to be a bug
- With "Play Selected First" disabled, the first item was
selected. This appeared to be intentional, since, at least with
"Shuffle" disabled, that is the item that was played
back. This may not be helpful either, since it makes you lose
your place in what can be a long list. It is also not
consistent with the behavior of the File Browser. The current
selection should probably be maintained in all cases.
- At least according to the manual and the behavior of the File
Browser, "Play Selected First" should only apply when "Shuffle"
is enabled.
Change-Id: Ic1205477d5bf8b22f8f32dd6d31d3b9ceb5a2d24
4f83e66 (FS#13287) introduced a useful option to
immediately re-load the saved dynamic playlist, so that
bookmark creation becomes possible.
(Current Playlist->Reload After Saving)
It seems unnecessary and won't produce the intended
effect to autoload bookmarks after the playlist is saved,
since playback position will be restored to where
it was previously.
Additionally, with "Load last Bookmark" set to "Ask",
the dialog for choosing a stored bookmark will appear
after the playlist has been saved. The dialog is
unwanted, since:
- Selecting a bookmark doesn't have expected effect
- Selecting "Don't resume" will actually resume
- Cancelling out of the screen will prevent the
saved playlist from being loaded, without this being
obvious to the user
- It causes a crash if the dynamic playlist is saved
from within the Playlist Viewer (both the Playlist Viewer
and the bookmark selection screen use the plugin
buffer)
Change-Id: I7d696e56c89394b3cd10ef6acfed4ddc7e814118
Drop wps_internals.h from skin_engine.h. The WPS and to a lesser
extent the radio screen are too tightly integrated to drop their
dependency on wps_internals.h, unfortunately. Skinned lists, for
obvious reasons, also need access to the internals.
Change-Id: I00a55aa423900f9ad22edccbe2fc1910af380e38
Merge the x1000 and jz47xx exception handling code since they use
the same exception vectors and handlers. The interrupt handler is
now called from the common exception vector, but remains separate
for each board since they have different IRQ layouts.
The new exception handler can provide a stack traceback from the
interrupted code, rather than the (uninteresting) caller traceback
displayed by panicf. This allows you to see what led up to a null
pointer deref or division by zero, which makes it _much_ easier to
track down errors that occur in common leaf functions like strcmp.
Change-Id: I59a0ebb5e40fcb36505c3bfdb47f8cac2f9936b1
the GUI_EVENT_NEED_UI_UPDATE event was not canceled till
after the call to scroll_stop this resulted in the scrolled line
being re-added after the function was done causing a crash
thanks spork, amachronic
Change-Id: I2e484a2b877f6da63171eb997f62a21e95ca9bfc
The original drawmode change was "x = (~x & INVERSEVID) | SOLID"
which is essentially XOR'ing the INVERSEVID bit, but I changed it
to mask out INVERSEVID by mistake.
Fixes 44b9785465.
Change-Id: I87b059b89aea9c31a8ff408016264285e67ca80c
Several places in the codebase implemented an ad-hoc form of pinning;
they can be converted to use buflib pinning instead.
Change-Id: I4450be007e80f6c9cc9f56c2929fa4b9b85ebff3
When I converted all the clipping checks in 4b8fe8acd1 I messed
up the hline and vline checks. This produced some weird panics on
the Shanling Q1, probably memory corruption -- but somehow it got
past AddressSanitizer. Go figure.
Change-Id: I84820c23a491d422218c72d2d5e199e2fc7def0f
allow buflib_free to check for invalid or already freed handles
within the function -- remove all the invalid handle guards thru core_free
Change-Id: Ibdcbc82760fc93b674c42283fca420d94907df8e
Simplify update_viewport() by calling update_viewport_rect().
The resulting LCD driver calls are the same either way and
for some reason, update_viewport() didn't handle non-default
stride viewports correctly.
Change-Id: Ic34d3d40e4f758db897cb3944d9d7475bbdb4d2c
clear_display() on grayscale LCDs sets the number of scrolling
lines to 0 but that's wrong, the scollers need to be shut down
first. Call scroll_stop() for that, as is done on color LCDs.
Change-Id: I75fb6839ed04f6fe1eb8e2855c8db820fcedddb8
There's no need to generate separate copies of these functions
for main and remote LCDs; we can just pass the viewport directly.
Change-Id: I20aa04a58d327b479a942708e161068bd6a3357b
