The old tools/mkzenboot has a number of problems: very hard to maintain,
poor integration with rbutil. Restart from scratch by recycling all the
crypto and descrambling code, rewrite the actual firmware modification part
to handle all scenarios in a much clearer way. The code is ready to be
integrated into Rockbox Utility, by using the very similar interface to
mkimxboot.
I copied all the keys from the old mkzenboot, so it can potentially support
the older Creative ports, but since this is untested, I prefer not do so
at the moment. However, I did add a "mixed" boot option to support the
dualboot style used in the older ports.
Change-Id: I80cfc48fa78187baa1b1692e8a30ec7137cea37b
Actually 0x20 is the right address, the 0x22 applies to the meizu which
probably use a Chinese clone with a non-spec compliant address.
Change-Id: I65b9ab6477c07a2293226536db3e696d34d3bc2c
This is mostly for consistency, this tool will be unused by the newer targets.
Also update the usage() display to mention -no-ciff
Change-Id: I4500f5fdce771ad3c53701a0bbaace916e88759d
The setting is currently unused but it provides some documentation and basic
support for a more comprehensive implementation of read-only support.
Change-Id: I353c33ef765ef6e6c09d59e943da6654a311ad84
The exact combination on which recording is needed is too complicated, so
just always cancel the unused warning, the compiler will optimise it away.
Change-Id: I0946586e4b01769c98babc4616f893c38f44c05f
The new code can select among several types of window (user, system, ...).
Furthermore, the type of partitions to use is selectable in config file.
Currently, two types are support: Freescale style MBR and Creative MBLK
Change-Id: I969d60a3d08f2c9448fb4b9c440051b7801b94cd
Currently we only support the BGA169 but if by chance Rockbox was to run on
a lqfp package for example, some pins may becomes unavailable or different.
Change-Id: I5c0d8d57ae31604572af37e0c2edd0bd7bda73a3
The old was doing register read/writes without calling tuner_power(), this
is broken for target with real tuner power management.
Change-Id: I5e60234697a8b91de6189daf6a10e871d5119b65
They share most of registers (except test and some extra bits), since our
driver is very basic, it is safe to relax the manufacurer & chip id check.
Change-Id: If54e8b9e0d852cd9128d5e28ff59bd2c7a55d98d
When bootloader is too intelligent, like on Creative devices, it might leave
some unexpected IRQs sources on, this is problematic when those sources share
the same IRQ line.
Change-Id: Ie9333918eb1048b1f2de4ea738cddf556aa75ee2
The STMP3700 has unreliable vbusvalid irq so we need to use
vdd5gtvddio. Therefore, using the vbusvalid bit produces
inconsistent results between events and detect. Fix that
by making power handle all the usb detect stuff.
Change-Id: Ic521b2f6677602e184fe46352c5359f4b4ba8d56
These functions are mostly used by the radio drivers and any blocking
call could potentially block the entire UI, which is pretty bad.
Since any request is expected to finish within a few us, having a 10ms
timeout doesn't seem unreasonable.
Change-Id: I03b19729511547e5bbdeb3476d020e5d87d0d7e1
On targets like stmp3700, resetting the dma channel on "soft" timeout
drives the whole block crazy unless it goes through complete reset.
Change-Id: I830b252279989bf9f9cd9c138240a6ea9b003527
The bootloader must call disk_init_subsystem() because it is multithread
(because of USB), otherwise strange things might happen. Calling disk_init()
is unnecessary since it is call when mounting partitions.
Change-Id: If7aff3dea0b96144e2a9b0f6179a9a0a632b93ed
Although Linux accepts several implicit definitions of SEEK_END found in
stdio.h, the compiler on FreeBSD won't. Rockbox compilation will fail
without stdio.h included.
There is a precedent for including this header, see
lib/rbcodec/codecs/libtremor/ivorbisfile.h.
Change-Id: I58510101b59a354cd6601cb3f323f385a824d2e8
Reviewed-on: http://gerrit.rockbox.org/639
Tested-by: Kevin Zheng <kevinz5000@gmail.com>
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
Added a 60s timeout to the script to avoid having to wait for ages when a download stalls.
Change-Id: I97f0aafe4eac0fb3cfc83805c99d19f1ef02b9f9
Reviewed-on: http://gerrit.rockbox.org/636
Reviewed-by: Kevin Zheng <kevinz5000@gmail.com>
Tested-by: Michael Rodger <rockbox@atinyhedgehog.za.net>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Disabling these two settings makes the image small enough to build again.
This build has been broken for long enough without any better solution
actually being worked on, so I think this is much better than nothing.
Change-Id: I77c34c1e714fb6e132ed0ce39f0917779efe1125
The dynmaic library support provided in dlfcn.h does not require
additional linker flags on FreeBSD. It is provided with the standard C
library and will fail to link if "-ldl" is specified.
Change-Id: I9f21d8369d45a9be94129a1b37b4607adf673c57
Reviewed-on: http://gerrit.rockbox.org/637
Tested-by: Kevin Zheng <kevinz5000@gmail.com>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Some older versions of the ROM (TA3 for example), use a 64 byte report size
instead of 1024, so hardcoding 1024 is just a bad idea.
Change-Id: I720c4465cfe2f519bffa307175614bba58766dce
This enables the encoders - i.e. to record audio -
to be loaded also on the simulator.
Change-Id: I54fdbeb75b89023c0d7824a34cf76301c02c3150
Reviewed-on: http://gerrit.rockbox.org/632
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
When Rockbox Utility is started for the first time, a new version is started or
the user selected to do so on startup a changelog window is shown.
Change-Id: Ic223e092a09d31ccbbfcd9b973355225cac27632
Use a function instead of looking for an existing entry and creating a new one
if necessary every time.
Change-Id: I7b385dad7366f27370545a7d1a9f7052510cca11
Enable simulator for the target ypr0 to
be built and used.
Change-Id: I1b080f07ab90f5c4856881d08ad70e1053bbb0c0
Reviewed-on: http://gerrit.rockbox.org/618
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
This adds the support for hosted or other
particular platforms, where the "root" ("home")
path is NOT "/" (or "").
The change affects screendump in particular.
Change-Id: I4c218d102fe12cc782aedb99d456e9f72679ea07
Reviewed-on: http://gerrit.rockbox.org/613
Reviewed-by: Thomas Martitz <kugel@rockbox.org>