Jonathan Gordon
|
ac61951452
|
Do the CONFIG_USBOTG define correctly
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12382 a1c6a512-1295-4272-9138-f99709370657
|
2007-02-18 04:57:28 +00:00 |
|
Jonathan Gordon
|
1083de8e7d
|
CONFIG_USBOTG fixes
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12377 a1c6a512-1295-4272-9138-f99709370657
|
2007-02-18 01:17:06 +00:00 |
|
Linus Nielsen Feltzing
|
1eff300f18
|
New PLL calculations to make sure that PLLDIV != 0. This seems to solve the problem with the troublesome H140 batch from OutletMP3.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12201 a1c6a512-1295-4272-9138-f99709370657
|
2007-02-05 00:01:29 +00:00 |
|
Michael Sevakis
|
9b720239a3
|
iRiver: Clearing CRSEL bit when using default CPU frequency caused audio chip to run at half frequency when radio screen called cpu_idle_mode(true) and corresponding high end loss after kepress timeout. CRSEL was originally preserved when bypassing PLL. CRSEL shouldn't have any bearing on PSTCLK or SCLK when PLL is bypassed since the dividers are bypassed as well (except for the divX2 for SCLK).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11695 a1c6a512-1295-4272-9138-f99709370657
|
2006-12-08 23:33:22 +00:00 |
|
Miika Pekkarinen
|
46a608bf07
|
PLL was incorrectly initialized causing system to crash when ran from
ROM.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11669 a1c6a512-1295-4272-9138-f99709370657
|
2006-12-06 10:02:06 +00:00 |
|
Michael Sevakis
|
0f5cb94aa4
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11452 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-06 18:07:30 +00:00 |
|
Jens Arnold
|
83aded979f
|
H300: (1) Use DMA for LCD updates, with auto-aligned line reads. Speeds up LCD updates by ~ 75% at 11MHz and 45MHz. Only ~ 11% speedup at 124MHz due to (2). (2) Less aggressive LCD transfer timing at 124MHz. With the previous timing, slightly corrupted display contents was reported, and with DMA transfers at least 4 waitstates are needed to make updates work at all. * A table in system-iriver.c shows settings for all integer multiples of the base clock frequency (info for developers, not yet complete).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11418 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-02 20:50:50 +00:00 |
|
Jonathan Gordon
|
139f9f28e9
|
move the iriver h1x0/h3x0 targets to the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
|
2006-10-30 08:56:06 +00:00 |
|