Commit graph

73 commits

Author SHA1 Message Date
Cástor Muñoz
882921efb6 ipod6g: bootloader v1
- dual boot
- USB mode
- battery trap

Change-Id: I8586cfeb21ee63f45ab965430725225fdfc4212d
2017-02-09 20:47:16 +01:00
Szymon Dziok
0eae33c60a Sansa View: replace real bootloader with a simple test code.
After placing the firmware.mi4 file in the root dir of the player in UMS mode of
the OF, Sansa should do stupid blinking with the backlight and buttonlight
alternately. Recovering from this state is possible through the recovery mode
(see Wiki), by putting an original copy of the firmware.mi4.

Change-Id: Ia913442b97e8c405f55c4676b9a2bf0b1b1d05d6
2014-03-27 23:31:04 +00:00
Andrew Ryabinin
5b5f0755d6 Introduce IHIFI760/960 targets.
Change-Id: Ie36e48742c0ed9aa3fd6f49aa034a11d2492327c
2013-12-16 00:45:18 +04:00
Andrew Ryabinin
3a97e12fc5 Introduce HiFi E.T. MA8/MA8C ports.
HiFi E.T. MA8 is almost the same as MA9 except
another DAC(pcm1792 in ma8, df1704 in ma9).

MA8 has ILI9342 lcd, MA8C has ILI9342C lcd.

Change-Id: If2ac04f5a3382590b2a392c46286559f54b2ed6a
2013-11-05 09:59:45 +04:00
Andrew Ryabinin
d602717735 Introduce HiFi E.T. MA9C port.
The only difference between this target and HiFi E.T. MA9
is display driver (ILI9342 in MA9 and ILI9342c in MA9C)

Change-Id: Icc3d2490f850902a653175360f12283f3708bbb7
2013-11-05 09:59:45 +04:00
Andrew Ryabinin
fa4e1baa83 Introduce HiFi E.T MA9 port.
Change-Id: I79aadc958fd5222f26f91ed127f8c6fb2c465dc2
2013-05-06 14:09:24 +04:00
Tomasz Moń
e8a8a1be43 Sandisk Sansa Connect port (FS #12363)
Included are drivers for buttons, backlight, lcd, audio and storage.



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31000 a1c6a512-1295-4272-9138-f99709370657
2011-11-16 14:08:01 +00:00
Andrew Ryabinin
2164aab902 Added HiFiMAN HM-801 target. FS#12355. This also renames tda1543.{ch} used by HM-60x to dummy_codec.{ch} as it works for PCM1704 used by HM-801.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30891 a1c6a512-1295-4272-9138-f99709370657
2011-11-03 11:53:02 +00:00
Marcin Bukat
32f763c39a Add HiFiMAN HM-60x target(s). FS#12319 by Andrew Ryabinin with some (small) modification by me. This also splits rk27xx lcd driver into lcdif-rk27xx and lcd controller specific part. Some modifications to the pcm driver have been made to allow using codecs in slave mode (as TDA1543 used in hifiman is slave only i2s codec).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30765 a1c6a512-1295-4272-9138-f99709370657
2011-10-17 10:32:19 +00:00
Frank Gevaerts
2b9e944021 Rework c200wipe to use proper partitioning and formatting code, which makes the code size-independent.
Also support the e200 with this code. Apparently it's also possible to get the e200 in a state where .fmt files don't help.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30413 a1c6a512-1295-4272-9138-f99709370657
2011-09-02 21:34:28 +00:00
Amaury Pouly
82ecc75e68 imx233/fuze+: make config.h more correct, remove logo from bootloader, update linker file and crt0 to produce a single blob into dram
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30111 a1c6a512-1295-4272-9138-f99709370657
2011-07-02 02:12:10 +00:00
Marcin Bukat
976a1699da Rockchip rk27xx port initial commit. This is still work in progress.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29935 a1c6a512-1295-4272-9138-f99709370657
2011-05-30 21:10:37 +00:00
Amaury Pouly
08fb3f6574 Sansa Fuze+: initial commit (bootloader only, LCD basically working)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29808 a1c6a512-1295-4272-9138-f99709370657
2011-05-01 13:02:46 +00:00
Michael Sevakis
863c03f2ae Gigabeat S: Renovate bootloader a bit to show splash, implement verbose, shutdown on low battery, handle hold-switch-on and wait only so long for USB if a USB charger is inserted at boot instead of being connected to a host. 'Bootloader USB mode' display is just part of normal printf stream now. Move interrupt stacks into .bss area so they aren't loaded (for firmware too).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29099 a1c6a512-1295-4272-9138-f99709370657
2011-01-21 07:05:51 +00:00
Marcin Bukat
15a0a3c263 Rename bootloader file for MPIO players as it supports both HD200 and HD300.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28700 a1c6a512-1295-4272-9138-f99709370657
2010-11-28 23:10:09 +00:00
Marcin Bukat
9a24892e2e MPIO HD300 - initial commit
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28680 a1c6a512-1295-4272-9138-f99709370657
2010-11-26 23:28:08 +00:00
Marcin Bukat
b09d3aec39 Add MPIO HD200 port - changed files
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25724 a1c6a512-1295-4272-9138-f99709370657
2010-04-26 21:40:00 +00:00
Michael Sevakis
011b0fa66a Gigabeat S: Fix bootloader red from r25547 commit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25548 a1c6a512-1295-4272-9138-f99709370657
2010-04-09 01:28:19 +00:00
Szymon Dziok
492fafe879 Packard Bell Vibe 500: remove the old bootloader code (actually a lack of code) and make the main-pp.c acting like a true bootloader for the DAP. It's the first step to integrate the DAP with the RBUtil.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25311 a1c6a512-1295-4272-9138-f99709370657
2010-03-23 21:28:25 +00:00
Frank Gevaerts
553626a958 Add initial Packard Bell Vibe 500 port, by Szymon Dziok
Author: Szymon Dziok 
Flyspray: FS#10912


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24276 a1c6a512-1295-4272-9138-f99709370657
2010-01-18 19:05:20 +00:00
Rafaël Carré
2392bb4199 FS#10047 : Clipv2
Reuse some code from Clip (LCD) and a lot of code from AS3525
Add a new CPU type : AS3525v2, identical to AS3525 except it's an ARMv5 (arm926-ejs)
SD code still not working
For an unknown reason LCD doesn't work anymore (to be investigated)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24131 a1c6a512-1295-4272-9138-f99709370657
2009-12-31 19:15:20 +00:00
Mark Arigo
6908cc5235 Merry Christmas Gogear HDD6330 owners! This is the start of the HDD6330 port. At the moment, it's essentially a copy of the HDD1630 port with a minimal LCD driver. The touchpad doesn't work as expected, but you can still kind of navigate and listen to music/radio.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24112 a1c6a512-1295-4272-9138-f99709370657
2009-12-25 04:05:01 +00:00
Robert Kukla
2d722a17ec make tpj1022 bootloader compile again
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23892 a1c6a512-1295-4272-9138-f99709370657
2009-12-07 16:12:49 +00:00
Dominik Wenger
41c497025f Initial mini2440 port.
Flyspray: FS#10627
Author: Bob Cousins

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23265 a1c6a512-1295-4272-9138-f99709370657
2009-10-19 18:14:27 +00:00
Dave Chapman
b04a7a86e1 Make the Nano2G bootloader actually function as a bootloader. The resulting bootloader-ipodnano2g.ipod file needs to be encrypted on a target using the crypt_firmware plugin to create bootloader-ipodnano2g.ipodx, which can then be written to the firmware partition using the ipodpatcher patch at FS#10609. Dual-booting doesn't work yet - only Rockbox can be run.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23084 a1c6a512-1295-4272-9138-f99709370657
2009-10-11 01:37:12 +00:00
Bertrik Sikken
2fb73842a9 Start of a Rockbox port to the Samsung YP-S3.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22085 a1c6a512-1295-4272-9138-f99709370657
2009-07-29 20:42:02 +00:00
Maurus Cuelenaere
cf9935d636 Onda VX747: add dual-boot capability + make it possible to permanently 'stick' Rockbox to your DAP
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21919 a1c6a512-1295-4272-9138-f99709370657
2009-07-17 14:30:42 +00:00
Dave Chapman
0270e4c591 Get the Nano2G bootloader running - it now runs and displays a logo on one type of Nano2G LCD.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21900 a1c6a512-1295-4272-9138-f99709370657
2009-07-16 00:57:02 +00:00
Robert Keevil
eea149bd13 FS#10436 - add the Sansa View to the build system. The bootloader builds but doesn't do anything useful yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21848 a1c6a512-1295-4272-9138-f99709370657
2009-07-13 21:09:39 +00:00
Dave Chapman
afe43d3fcb Basic changes to add nano 2g to the build system, based on the Meizu M3 port. The bootloader builds, but does nothing due to lack of any drivers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21828 a1c6a512-1295-4272-9138-f99709370657
2009-07-12 22:16:51 +00:00
Maurus Cuelenaere
582942016b * Commit a modified FS#10354 (thanks to Davide Quarta) - add support the VX747+ in scramble and configure
* Add support for the VX777
* Remove the touchscreen mode switching combo from the button driver



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21379 a1c6a512-1295-4272-9138-f99709370657
2009-06-20 10:54:13 +00:00
Mark Arigo
758bb3bc62 3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21083 a1c6a512-1295-4272-9138-f99709370657
2009-05-25 21:10:45 +00:00
Daniel Stenberg
8983fcb5f2 Initial commit for the "Lyre prototype 1" port by Jorge Pinto from FS#10045.
Bootloader builds, normal does not.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20574 a1c6a512-1295-4272-9138-f99709370657
2009-03-30 12:20:47 +00:00
Maurus Cuelenaere
9da2456c26 Fix SVN properties
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19482 a1c6a512-1295-4272-9138-f99709370657
2008-12-19 11:29:18 +00:00
Maurus Cuelenaere
40ec543052 * Add support for Onda VX747+ (FS#9674 by Olivier Barbut)
* Fix Onda VX767 support
 * Small cleanup


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19481 a1c6a512-1295-4272-9138-f99709370657
2008-12-19 11:13:58 +00:00
Rob Purchase
9f0fbec999 Show the Rockbox logo in the Telechips bootloader.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19129 a1c6a512-1295-4272-9138-f99709370657
2008-11-17 21:16:00 +00:00
Frank Gevaerts
4f81a54829 Add c200 erase tools. The resulting .bin files can be run from e200tool
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18854 a1c6a512-1295-4272-9138-f99709370657
2008-10-21 18:57:11 +00:00
Dave Chapman
08c41d42bb Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
2008-10-19 14:11:01 +00:00
Dave Chapman
da8bff107e Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18782 a1c6a512-1295-4272-9138-f99709370657
2008-10-12 16:46:01 +00:00
Marcoen Hirschberg
48e45f5751 add Meizu M6SP and M3 ports
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18544 a1c6a512-1295-4272-9138-f99709370657
2008-09-17 23:22:11 +00:00
Maurus Cuelenaere
e144638167 Add Onda VX767 target
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18422 a1c6a512-1295-4272-9138-f99709370657
2008-09-05 15:09:40 +00:00
Maurus Cuelenaere
5420c3f672 Share bootloader with Creative ZVM 30GB/60GB and Creative ZV
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18415 a1c6a512-1295-4272-9138-f99709370657
2008-09-04 19:53:16 +00:00
Maurus Cuelenaere
944c33403c * Commit dual-boot support for Creative ZVx family
* Add mkzenboot: makes it possible to integrate Rockbox bootloader with
   Creative firmwares without the need of distributing binaries
 * Add Tadeusz Pyś to credits, who figured out the minifs file system
 * Fix bootloader


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18352 a1c6a512-1295-4272-9138-f99709370657
2008-08-27 20:32:12 +00:00
Maurus Cuelenaere
0709f0a5c6 Add preliminary support for the Onda VX747 (MIPS target)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
2008-07-14 15:03:10 +00:00
Marcoen Hirschberg
7b10ef9a7c initial Meizu M6SL port (take 2)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17819 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 23:24:34 +00:00
Mark Arigo
22e7bf32b8 My Devcon 2008 contribution: port for Philips GoGear HDD1630 (PP5022-based). Current status is that the bootloader works to load Rockbox, but dual boot does not work: it freezes after decrypting the OF. When Rockbox boots, it freezes somewhere between showing the logo and the main menu. And there's no driver for the touchpad. So lots of work left.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17809 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 18:40:25 +00:00
Mark Arigo
b4275d4941 Philips GoGear SA9200 port. Working bootloader and normal builds, including sound. No touchpad now, buttons limited to using vol+/vol-/power for up/down/select. Rockbox USB is enabled since the OF is MTP only...read the warnings on the PortalPlayerUsb wiki page.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17591 a1c6a512-1295-4272-9138-f99709370657
2008-05-21 03:55:17 +00:00
Barry Wardell
940091ae38 FS#7977: Bootloader logo for PP-based targets (H10, Sansa, M-Robe 100).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17374 a1c6a512-1295-4272-9138-f99709370657
2008-05-05 12:05:00 +00:00
Marcoen Hirschberg
b2ec13d8f1 Revert "initial Meizu M6SL port"
This reverts commit b7bd17ce1715c3a8acbf74a63694c28b6075da5b.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16846 a1c6a512-1295-4272-9138-f99709370657
2008-03-27 11:53:51 +00:00
Marcoen Hirschberg
c7e5d78241 initial Meizu M6SL port
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16844 a1c6a512-1295-4272-9138-f99709370657
2008-03-27 11:29:24 +00:00