I noticed the way filetree switch was modified
for the lua (and then) opx and open plugin viewers
since builtin files are assumed to be handled in the filetree switch
what if instead filetype_get_plugin() could search the available viewers
this could probably be extended further with selectable defaults
Change-Id: I40f74cd698f4b788a0adcbebf32c08a970df29a5
it makes more sense to make the main buffer static and make the
second (infrequently needed) buffer as stack allocated
Change-Id: Ide7c1a7a312124e47a23ed0ab75a90d7b8be982e
Adding a checksum over the struct offset will allow checking
for compatibility across machines rather than using packed structs
to ensure compability
For any file created by the user from the device this isn't really a concern
But for files between machines, across installs (sim v device),
possibly even across compilers this at least will alert the user
rather than returning junk data
Change-Id: Id0531bbaa7013dce24dece270849f0a10ac99c20
OST timer fix (7a5130a277) causes a boot failure on some units,
the battery voltage reading needs more time to stabilize.
Change-Id: Ic4a9ba90a16fab8ac6d27dbbe7af381f7c810f8f
The battery stabilization delay call seems to need to be
about 170 at minimum now, let's do 190 for safety (+20ms).
Change-Id: Ifd0248891abe827dfcc3e6baf48cc5bef0d0cc1c
It turns out the prescaler fields in OST_CTRL are 2 bits wide,
not 3. The programming manual (as usual) is ambiguous and its
diagram shows 2-bit wide fields, but the bit positions in the
text give a 3-bit wide field. Ingenic's Linux code and my own
testing shows that they are, in fact, 2 bits wide.
This caused the OST2 divisor to be 16 instead of 4; the OST1
divisor was correct. This means that all udelay/mdelay calls
took 4x longer than they should've. After this change the OST2
prescaler will be 4, as intended, and udelay/mdelay calls will
wait for the intended duration.
Change-Id: I2ac0a9190f49b59a840c649bf586131f5f9fde82
This boosts USB transfer performance a bit, ~10% for reads and
~25% for writes, for large-ish file transfers. Rockbox is still
around 33-50% slower than the OF.
Change-Id: I236a1e5c69a290c47ed27b70cb2631111fc157ed
When performing an OUT transfer which is not a multiple of the
max packet size, the last packet of the OUT transfer should be
a short packet. However, there's no guarantee the host sends
the expected amount of data in the final packet.
The DWC2 USB controller handles this case by accepting any size
packet and copying it out to memory. So if the packet is bigger
than expected, it'll overrun the caller's buffer and Bad Things
will happen.
The USB 2.0 spec seems to endorse this behavior. Section 8.5.1
says "an ACK handshake indicates the endpoint has space for a
wMaxPacketSize data payload." So it is possible that other USB
controllers share the DWC2's behavior.
The simplest solution is to force all USB RX buffers to be big
enough to hold the transfer size, rounded up to a multiple of
the max packet size. For example, a transfer of 700 bytes would
require a 1024-byte buffer if the MPS = 512 bytes.
Change-Id: Ibb84d2b2d53aec8800a3a7c2449f7a17480acbcf
All existing USB drivers now define USB_LEGACY_CONTROL_API to
enable the emulation layer.
Control request handlers will be ported in follow-up commits.
Change-Id: I4be1ce7c372f2f6fee5978a4858c841b72e77405
On language change Stored plugins may fail to run due
to hashing on lang dependent string
allows searching by langid when the supplied key is LANG_PTR
Fixes error on hash flush where previous entry was not restored
Adds routine to update file in-place (for ATA targets)
Other targets make a temp file to copy entries
breaking changes:
ROCKBOXDIR is no longer hashed since
/.rockbox directory may soon be able to be changed
packed attribute added to op data structure -- oops
Change-Id: Ieead26609559b9c5bdadc6a95227cb2bfbb9f71c
CheckWPS doesn't catch errors involving translated strings
Instead of breaking old themes when the langids no long exist
return "<ERR>"
Change-Id: I0d744cd48bb5a27e735fce3f6f740450d1f6a55a
This makes it possible for macros of conditionally included string
descriptors to get a correct index no matter what other usb drivers
are enabled or disabled due to the nature behavior of enums.
Change-Id: I8ccebbd316605bed0f5d90b6b73fab4a333c02fa
Write -1 to AIC_DR to initialize the "last sample"
to -1 in order to prevent power-on clicks.
It appears necessary to completely fill the FIFO,
otherwise I was able to get a click out of it, however
uncommon it was.
Not only does this prevent a click when first
playing a song after power-on, but it also seems to prevent
any click at all when powering on - previously, a small
click may have been heard when first booting.
Change-Id: I2b81c2fa6af9809ef1c354d7a08ca8f9893a7690
Previously it used the last sample, which turns out to be broken.
The AIC appears to send out a random non-zero sample continously
after boot -- probably because the last sample is uninitialized by
the hardware. Disabling playback is supposed to make it send zero
samples irregardless of the LSMP bit according to the docs, but it
doesn't seem to work this way.
- Change eliminates the white noise heard on the M3K after boot.
- Change has no adverse effects on the Q1.
- Leave Eros Q on the old setting since sending zeros exacerbates
clicking due to DAC's automute feature.
Change-Id: I9996793fc34f4475b19700d076b11505353b3836
According to a forum user, there's an audible click when changing
the volume between -32 and -32.5 dB with some headphones. Fix this
by not (ab)using the DAC digital mixer for volume control.
The mixer only provides an extra -6 dB of hardware volume range,
so the only side effect is that software volume will now kick in
at -32 dB instead of -38 dB.
Change-Id: If24d9bc0058eff3c1a29aefb155a2e378522623c
there is a 1MB free region that is used to load the firmware but we
shouldn't need that till after a USB connection
so here is my 2nd try
Change-Id: I2552db3a7fba019d7e7188984432f758ddafe548
Upon getting a USB reset, the USB core will update charging
current by calling usb_charging_maxcurrent_change(). On all
current X1000 targets this may cause a hang, since changing
the charge current involves a blocking I2C transaction.
Eg. if the host issues a reset when we're already configured
as part of error recovery, the change from 500 mA -> 100 mA
will cause a hang.
Change-Id: I5b45272c01fa16b179ae3d16bbc50c7fab9a416b
0.) B 0 /rockbox/apps/main.c:405
1.) B 1 /rockbox/firmware/kernel/thread.c thread[dircache]:1508
2.) B 2 /rockbox/apps/tagcache.c:4772
3.) U 3 /rockbox/apps/tagcache.c:4793
add logic to show count after log rolls over
clean-up
Change-Id: Ibda0a56e5d8d89aa8b7649f4f9fa64eb1ff0e08f
A lot of our translations have voice phrases that are identical
to English, even though they are translated in the display text.
In these scenarios, just use the translated text when generating
the voice files. These will still be flagged as problems by the
translation web site!
Change-Id: I39a9888eaad650e4c847cccc60bd89cf44ae150a
When a prase is translated but the voice is not, default to using
the translated phrase over the untranslated English voice
Change-Id: Ie2cb1c6d0c370f450586b8a4653f1a073f8aec9d
when the voice system is doing queued voice clips you can get a
voice_stop event which cancels the cpu boost
but the quiet count was not reset to 0
next clip may play unboosted causing stuttering
just boost unconditionally on Q_PLAY
it'll unboost after timeout if unneeded
Change-Id: Ib39df5d9f8a9e41299147a885048cf1361180dd6
This reverts commit 67716c6b46.
Reason for revert: Only partially working on bare-metal ports, so revert this for now.
Change-Id: I5cea7d2b6466a43aaff4c3eb90ab5d7aee736a5b
