fixed a bug concerning bytes padding, since it wasn't correctly
implemented regarding original firmware structure.
This fixes ROM generation especially for ypr1.
Change-Id: I1a40fb4bb8f9d6b005d694246123e314c4d19b49
Reviewed-on: http://gerrit.rockbox.org/616
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
They have been rewritten for being completely free and
as fast as possible.
Successfully extracted, patched, repacked and flashed
original firmware (tested on device and it worked)
Change-Id: I74d47d13f2dc3a2832a0d6821d3c2182dfd4b33b
Reviewed-on: http://gerrit.rockbox.org/506
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
This will be required by the R0 port. Generating C source with 24bit data is
not supported yet because Rockbox doesn't support this depth yet (and has no
data type for it).
Change-Id: I6474a6d32bb7942661bac833bb3348073335e25c
This one is a bit strange: our codebase just don't use it if there is both
SD and MMC, so this missing function got unnoticed so far.
Change-Id: Ifea4bb5140477b7637d033737594259cc44fb10e
The i2c core has some bugs: it locks up when the slave doesn't NAK and
prevent the dma channel from being resetted. Specifically handle this
situation by setting CLR_GOT_A_NAK (workaround) and then reset dma and i2c
block.
Change-Id: I0e09d38d4301a0ad42dfad785cc934b43f2c4485
Target that have a touchpad/touchscreen should disable it while
being locked (In order to avoid LCD to drain battery power due to
"key locked" constant reporting messages. If they a have a keylock
button this was already handled at driver level. If not (e.g. fuze+),
they will have to implement a switch at driver level that action.c
can operate on softlock.
This patch does the following for any target having a touchpad
or a touchscreen and no HAS_BUTTON_HOLD (ie any softlock target)
1) it implements the code to call button_enable_touch(bool en) in
action.c.
2) button_enable_touch is implemented in button.c and call
either touchpad_enable or touchscreen_enable
3) those two function are implemented respectively in touchscreen.c
and a new touchpad.c file. They provide a generic way to silents touch's
device and call a function at driver level where target specific code
can be implemented if possible/needed (for power saving for instance).
Those function name are touchpad_enable_device and touchscreen_enable_device
4) we implement an empty function at driver level of targets that need it
to have them still being able to compiled.
Change-Id: I9ead78a25bd33466a8533f5b9f259b395cb5ce49
Reviewed-on: http://gerrit.rockbox.org/569
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
ACTION_STD_MENU seems to be an important keymaps. We map it to
BUTTON_BACK and keep cancel on the BUTTON_LEFT
Change-Id: Iea4a1e4671faee376ad4200b08ca82c2d00d1ff9
Reviewed-on: http://gerrit.rockbox.org/571
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
This quick and dirty utility allows to extract nand bootloader
from raw 1st nand block dump. I post it mainly to somewhat
document how BCH error correction engine of the rk27xx works.
Change-Id: I37ca91add7d372e3576d2722afc946d0f08971a9
Sync opus codec to upstream commit
02fed471a4568852d6618e041c4f2af0d7730ee2 (August 30 2013)
This brings in a lot of optimizations but also makes the diff
between our codec and the upstream much smaller as most of our
optimizations have been upstreamed or supeceded.
Speedups across the board for CELT mode files:
64kbps 128kbps
H300 9.82MHz 15.48MHz
c200 4.86MHz 9.63MHz
fuze v1 10.32MHz 15.92MHz
For the silk mode test file (16kbps) arm targets get a speedup
of about 2MHz while the H300 is 7.8MHz slower, likely because it's
now using the pseudostack more rather than the real stack which
is in iram. Patches to get around that are upcomming.
Change-Id: Ifecf963e461c51ac42e09dac1e91bc4bc3b12fa3
Instead of providing yet another memory allocator implementation
use tlsf and simply link tlsf library.
Another small improvement is to *grow* memory pool by grabbing
audiobuffer instead of just switching to use audiobuf exclusively.
Tested with simple lua 'memory eater' script.
This patch extends tlsf lib slightly. You can provide
void *get_new_area(size_t * size) function which will override
weak dummy implementation provided in lib itself. This allows to
automaticaly initialize memory pool as well as grow memory
pool if needed (for example grab audiobuffer when pluginbuffer
is exhaused).
Change-Id: I841af6b6b5bbbf546c14cbf139a7723fbb982f1b
codec makefiles larger freedom in what they can do to it.
Use this in libopus to prepend the libopus searchpaths to
CODECFLAGS so that its internal config.h will be picked up before
our global one. This avoids having to do a s/config.h/opus_config.h/
when syncing which will be handy soon.
Change-Id: I018d729aa0c8300fa3149f22a5a8c5668b339dfa
Reviewed-on: http://gerrit.rockbox.org/496
Reviewed-by: Nils Wallménius <nils@rockbox.org>
Drop most of the cases: only keep 64 MHz and 133 MHz. Pick values
from the manual which seem to match real life values.
Change-Id: I912752fbe372f9f44207db6853d0ff92fd619bed
I was too aggressive when converting reads to standard reads, this
one is memory based and not file based
Change-Id: Ibe7162894cc44cbd79f56cafe7136bda0f76bcdc
Now always generate a "make.db" file which aims at being the exact
representation of the file, ie running sbtoelf and elftosb using
the generated command file should produce the exact same file
(except for the random paddings). We still miss the support
for some option parsing to achieve that though.
Change-Id: Ib7d6b241f7855fd35225df8ab8e0711f69d9ee5a
