Increase maximum event count as we need more (I actually had a report about it during custom statusbar testing).
Removed corresponding functions from the core and plugin api. Bump min version and sort.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23302 a1c6a512-1295-4272-9138-f99709370657
c200v1: use a loop similar to r21320 and before to get almost the same performance (49.x fps while r21320 had 50.7 fps)
c200v2: better use of the DBOP fifo (taken from r21190) : 30% more fps
rename lcd_send_data to lcd_write_data now that it has the same prototype
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21427 a1c6a512-1295-4272-9138-f99709370657
The LCD driver is unified and lcd_send_command now takes 2 arguments : the command and its argument.
If there is no argument, it's set to 0 and a NOP command is issued
If there is more than one argument (set X/Y address), the 2nd argument is sent as a 2nd command, and a NOP command is issued after it.
Benefit : c200v2 transfers the command and the argument in one 16 bits transfer
Performance should not be affected since commands without argument are only used in lcd_init() and lcd_enable()
lcd_send_data() now transfers whole lines (or columns) instead of single pixels
yuv is disabled for c200v2 for now
Some buttons can be read, including left button (bit 6 of DBOP_DIN), but for some reason they have no effect in rockbox: to be investigated
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21321 a1c6a512-1295-4272-9138-f99709370657
2009-06-17 19:55:27 +00:00
Renamed from firmware/target/arm/sandisk/sansa-c200/lcd-c200.c (Browse further)
