Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/lcd-c200_c200v2.c
Rafaël Carré cb2c947b1b Sansa c200v1 & c200v2 LCD: higher performance when writing pixels 
c200v1: use a loop similar to r21320 and before to get almost the same performance (49.x fps while r21320 had 50.7 fps)
c200v2: better use of the DBOP fifo (taken from r21190) : 30% more fps
rename lcd_send_data to lcd_write_data now that it has the same prototype

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21427 a1c6a512-1295-4272-9138-f99709370657
2009-06-20 22:49:04 +00:00

463 lines
11 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by Mark Arigo
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
#include "lcd.h"
#include "kernel.h"
#include "system.h"
#ifdef SANSA_C200V2
/* button driver needs to know if a lcd operation is in progress */
static bool lcd_busy = false;
#endif
/* Display status */
static unsigned lcd_yuv_options SHAREDBSS_ATTR = 0;
static bool is_lcd_enabled = true;
/* LCD command set for Samsung S6B33B2 */
#define R_NOP 0x00
#define R_OSCILLATION_MODE 0x02
#define R_DRIVER_OUTPUT_MODE 0x10
#define R_DCDC_SET 0x20
#define R_BIAS_SET 0x22
#define R_DCDC_CLOCK_DIV 0x24
#define R_DCDC_AMP_ONOFF 0x26
#define R_TEMP_COMPENSATION 0x28
#define R_CONTRAST_CONTROL1 0x2a
#define R_CONTRAST_CONTROL2 0x2b
#define R_STANDBY_OFF 0x2c
#define R_STANDBY_ON 0x2d
#define R_DDRAM_BURST_OFF 0x2e
#define R_DDRAM_BURST_ON 0x2f
#define R_ADDRESSING_MODE 0x30
#define R_ROW_VECTOR_MODE 0x32
#define R_N_LINE_INVERSION 0x34
#define R_FRAME_FREQ_CONTROL 0x36
#define R_RED_PALETTE 0x38
#define R_GREEN_PALETTE 0x3a
#define R_BLUE_PALETTE 0x3c
#define R_ENTRY_MODE 0x40
#define R_X_ADDR_AREA 0x42
#define R_Y_ADDR_AREA 0x43
#define R_RAM_SKIP_AREA 0x45
#define R_DISPLAY_OFF 0x50
#define R_DISPLAY_ON 0x51
#define R_SPEC_DISPLAY_PATTERN 0x53
#define R_PARTIAL_DISPLAY_MODE 0x55
#define R_PARTIAL_START_LINE 0x56
#define R_PARTIAL_END_LINE 0x57
#define R_AREA_SCROLL_MODE 0x59
#define R_SCROLL_START_LINE 0x5a
#define R_DATA_FORMAT_SELECT 0x60
#if defined(SANSA_C200)
/* wait for LCD */
static inline void lcd_wait_write(void)
{
while (LCD1_CONTROL & LCD1_BUSY_MASK);
}
/* send LCD data */
static void lcd_send_pixel(const fb_data data)
{
lcd_wait_write();
LCD1_DATA = data >> 8;
lcd_wait_write();
LCD1_DATA = data & 0xff;
}
inline void lcd_write_data(const fb_data *data, int width)
{
do {
lcd_send_pixel(*data++);
} while(--width);
}
/* send LCD command */
static void lcd_send_command(unsigned char cmd, unsigned char arg)
{
lcd_wait_write();
LCD1_CMD = cmd;
/* if the argument is 0, we send a NOP (= 0) command */
lcd_wait_write();
LCD1_CMD = arg;
}
static inline void c200v1_lcd_init(void)
{
/* This is from the c200 of bootloader beginning at offset 0xbbf4 */
outl(inl(0x70000010) & ~0xfc000000, 0x70000010);
outl(inl(0x70000010), 0x70000010);
DEV_INIT2 &= ~0x400;
udelay(10000);
LCD1_CONTROL &= ~0x4;
udelay(15);
LCD1_CONTROL |= 0x4;
udelay(10);
LCD1_CONTROL = 0x0084; /* bits (9,10) = 00 -> fastest setting */
udelay(10000);
}
#define lcd_delay(delay) udelay((delay) * 1000)
#elif defined(SANSA_C200V2)
static inline void lcd_delay(int delay)
{ //TUNEME : delay is in milliseconds
delay <<= 14;
while(delay--) ;
}
/* send LCD data */
void lcd_write_data(const fb_data *data, int width)
{
do {
DBOP_DOUT = *data << 8 | *data >> 8;
data++;
/* Wait if push fifo is full */
while ((DBOP_STAT & (1<<6)) != 0);
} while(--width);
/* While push fifo is not empty */
while ((DBOP_STAT & (1<<10)) == 0);
}
/* send LCD command */
static void lcd_send_command(unsigned char cmd, unsigned char val)
{
DBOP_TIMPOL_23 = 0xa167006e;
DBOP_DOUT = cmd | val << 8;
while ((DBOP_STAT & (1<<10)) == 0);
DBOP_TIMPOL_23 = 0xa167e06f;
}
static inline void as3525_dbop_init(void)
{
CGU_DBOP = (1<<3) | AS3525_DBOP_DIV;
DBOP_TIMPOL_01 = 0xe167e167;
DBOP_TIMPOL_23 = 0xe167006e;
DBOP_CTRL = 0x40008;
GPIOB_AFSEL = 0xc;
GPIOC_AFSEL = 0xff;
DBOP_TIMPOL_23 = 0x6006e;
DBOP_CTRL = 0x52008;
DBOP_TIMPOL_01 = 0x6e167;
DBOP_TIMPOL_23 = 0xa167e06f;
lcd_delay(20);
}
/* we need to set the DBOP_DOUT pins high, for correct dbop reads */
bool lcd_button_support(void)
{
const fb_data data = 0xffff;
if (lcd_busy) /* we can't use dbop for reading if we are in the */
return false; /* middle of a write operation */
/* use out of screen coordinates */
lcd_send_command(R_X_ADDR_AREA, 0);
lcd_send_command(1, 0);
lcd_send_command(R_Y_ADDR_AREA, 0);
lcd_send_command(1, 0);
lcd_write_data(&data, 1);
return true;
}
#endif
/* LCD init */
void lcd_init_device(void)
{
#if defined(SANSA_C200)
c200v1_lcd_init();
#elif defined(SANSA_C200V2)
as3525_dbop_init();
#endif
lcd_send_command(R_STANDBY_OFF, 0);
lcd_delay(20);
lcd_send_command(R_OSCILLATION_MODE, 0x01);
lcd_delay(20);
lcd_send_command(R_DCDC_AMP_ONOFF, 0x01);
lcd_delay(20);
lcd_send_command(R_DCDC_AMP_ONOFF, 0x09);
lcd_delay(20);
lcd_send_command(R_DCDC_AMP_ONOFF, 0x0b);
lcd_delay(20);
lcd_send_command(R_DCDC_AMP_ONOFF, 0x0f);
lcd_delay(20);
lcd_send_command(R_DRIVER_OUTPUT_MODE, 0x07);
lcd_send_command(R_DCDC_SET, 0x03);
lcd_send_command(R_DCDC_CLOCK_DIV, 0x03);
lcd_send_command(R_TEMP_COMPENSATION, 0x01);
lcd_send_command(R_CONTRAST_CONTROL1, 0x55);
lcd_send_command(R_ADDRESSING_MODE, 0x10);
lcd_send_command(R_ROW_VECTOR_MODE, 0x0e);
lcd_send_command(R_N_LINE_INVERSION, 0x0d);
lcd_send_command(R_FRAME_FREQ_CONTROL, 0);
lcd_send_command(R_ENTRY_MODE, 0x82);
/* vertical dimensions */
lcd_send_command(R_Y_ADDR_AREA, 0x1a); /* y1 + 0x1a */
lcd_send_command(LCD_HEIGHT - 1 + 0x1a, 0); /* y2 + 0x1a */
/* horizontal dimensions */
lcd_send_command(R_X_ADDR_AREA, 0); /* x1 */
lcd_send_command(LCD_WIDTH - 1, 0); /* x2 */
lcd_delay(100);
lcd_send_command(R_DISPLAY_ON, 0);
}
/*** hardware configuration ***/
int lcd_default_contrast(void)
{
return DEFAULT_CONTRAST_SETTING;
}
void lcd_set_contrast(int val)
{
#ifdef SANSA_C200V2
lcd_busy = true;
#endif
lcd_send_command(R_CONTRAST_CONTROL1, val);
#ifdef SANSA_C200V2
lcd_busy = false;
#endif
}
void lcd_set_invert_display(bool yesno)
{
/* TODO: Implement lcd_set_invert_display() */
(void)yesno;
}
#if defined(HAVE_LCD_ENABLE)
void lcd_enable(bool yesno)
{
if (yesno == is_lcd_enabled)
return;
#ifdef SANSA_C200V2
lcd_busy = true;
#endif
if ((is_lcd_enabled = yesno))
{
lcd_send_command(R_STANDBY_OFF, 0);
lcd_send_command(R_DISPLAY_ON, 0);
lcd_activation_call_hook();
}
else
{
lcd_send_command(R_STANDBY_ON, 0);
}
#ifdef SANSA_C200V2
lcd_busy = false;
#endif
}
#endif
#if defined(HAVE_LCD_ENABLE) || defined(HAVE_LCD_SLEEP)
bool lcd_active(void)
{
return is_lcd_enabled;
}
#endif
/* turn the display upside down (call lcd_update() afterwards) */
void lcd_set_flip(bool yesno)
{
#ifdef SANSA_C200V2
lcd_busy = true;
#endif
lcd_send_command(R_DRIVER_OUTPUT_MODE, yesno ? 0x02 : 0x07);
#ifdef SANSA_C200V2
lcd_busy = false;
#endif
}
/*** update functions ***/
void lcd_yuv_set_options(unsigned options)
{
lcd_yuv_options = options;
}
/* Line write helper function for lcd_yuv_blit. Write two lines of yuv420. */
extern void lcd_write_yuv420_lines(unsigned char const * const src[3],
int width,
int stride);
extern void lcd_write_yuv420_lines_odither(unsigned char const * const src[3],
int width,
int stride,
int x_screen, /* To align dither pattern */
int y_screen);
/* Performance function to blit a YUV bitmap directly to the LCD */
void lcd_blit_yuv(unsigned char * const src[3],
int src_x, int src_y, int stride,
int x, int y, int width, int height)
{
unsigned char const * yuv_src[3];
off_t z;
#ifdef SANSA_C200V2
lcd_busy = true;
#endif
/* Sorry, but width and height must be >= 2 or else */
width &= ~1;
height >>= 1;
y += 0x1a;
z = stride*src_y;
yuv_src[0] = src[0] + z + src_x;
yuv_src[1] = src[1] + (z >> 2) + (src_x >> 1);
yuv_src[2] = src[2] + (yuv_src[1] - src[1]);
lcd_send_command(R_ENTRY_MODE, 0x80);
lcd_send_command(R_X_ADDR_AREA, x);
lcd_send_command(x + width - 1, 0);
if (lcd_yuv_options & LCD_YUV_DITHER)
{
do
{
lcd_send_command(R_Y_ADDR_AREA, y);
lcd_send_command(y + 1, 0);
#ifndef SANSA_C200V2 // TODO
lcd_write_yuv420_lines_odither(yuv_src, width, stride, x, y);
#endif
yuv_src[0] += stride << 1; /* Skip down two luma lines */
yuv_src[1] += stride >> 1; /* Skip down one chroma line */
yuv_src[2] += stride >> 1;
y += 2;
}
while (--height > 0);
}
else
{
do
{
lcd_send_command(R_Y_ADDR_AREA, y);
lcd_send_command(y + 1, 0);
#ifndef SANSA_C200V2 // TODO
lcd_write_yuv420_lines(yuv_src, width, stride);
#endif
yuv_src[0] += stride << 1; /* Skip down two luma lines */
yuv_src[1] += stride >> 1; /* Skip down one chroma line */
yuv_src[2] += stride >> 1;
y += 2;
}
while (--height > 0);
}
#ifdef SANSA_C200V2
lcd_busy = false;
#endif
}
/* Update the display.
This must be called after all other LCD functions that change the display. */
void lcd_update(void)
{
lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
}
/* Update a fraction of the display. */
void lcd_update_rect(int x, int y, int width, int height)
{
const fb_data *addr;
if (x + width >= LCD_WIDTH)
width = LCD_WIDTH - x;
if (y + height >= LCD_HEIGHT)
height = LCD_HEIGHT - y;
if ((width <= 0) || (height <= 0))
return; /* Nothing left to do. */
addr = &lcd_framebuffer[y][x];
#ifdef SANSA_C200V2
lcd_busy = true;
#endif
if (width <= 1) {
/* The X end address must be larger than the X start address, so we
* switch to vertical mode for single column updates and set the
* window width to 2 */
lcd_send_command(R_ENTRY_MODE, 0x80);
lcd_send_command(R_X_ADDR_AREA, x);
lcd_send_command(x + 1, 0);
} else {
lcd_send_command(R_ENTRY_MODE, 0x82);
lcd_send_command(R_X_ADDR_AREA, x);
lcd_send_command(x + width - 1, 0);
}
lcd_send_command(R_Y_ADDR_AREA, y + 0x1a);
lcd_send_command(y + height - 1 + 0x1a, 0);
do {
lcd_write_data(addr, width);
addr += LCD_WIDTH;
} while (--height > 0);
#ifdef SANSA_C200V2
lcd_busy = false;
#endif
}
Reference in a new issue View git blame Copy permalink