The driver can now handle HOLD in several ways, including using a GPIO.
Also add a debug routine to read the raw value of the adc.
Change-Id: Ide2cb1ac58e759b4bc464e606b432f2c150ee36f
Many imx233 targets boot in a very low performance mode, typically cpu and
dram at 24MHz. This results in very slow boots and very unstable USB
bootloader mode. Since cpu frequency scaling is disabled in bootloader in
rockbox, always make the frequency scaling code available and boost at boot
time.
Change-Id: Ie96623c00f7c4cd9a377b84dcb14b772558cfa4d
This fix FS#12902 and prevent same bug in bookmark screen.
thanks to Julian67 for reporting
Change-Id: Ifd2a383fd0f24aa3e242a8c72668de85526f0a70
Reviewed-on: http://gerrit.rockbox.org/622
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
If a single player is detected it might still have ambiguous as state due to
the mountpoint not being found. Make sure to display a sensible error message
in that case.
Change-Id: I7d62e739019b26a583fe6aab502d0f870e67587e
The old detection code simply assumed only one player to be connected and threw
all information it could find together, causing wrong results in various cases.
Rewrite it to better handle this.
- Don't expect only a single player to be attached. Return a list of players
found instead. The configuration dialog can then show the user a list to
select from. This is not implemented yet, the configuration dialog will only
show the devices found and tell the user to disconnect all but one.
- Handle ambiguous cases better. A player found that is ambiguous is treated as
such, and if refining the result didn't lead to a single match for each
possible player a single entry is created that indicates it being ambiguous.
The current code needs a bit of additional cleanup (the result exposes internal
data to the caller it shouldn't) to be done later.
Change-Id: I22dc2f73cdd6a9d90c34f3a0703aa9e0a2d2087a
Use insertMulti() instead of insert() when adding found USB devices to the
list. This means the keys of the list will now be ambiguous. This is not a
problem since the value is only used to display the user a nice string.
Previously we'd loose two identical devices attached to the system since the
second one would overwrite the first.
This does not apply for Windows, since Windows will list each function of a
composite device. This results in a device running Rockbox (with HID enabled)
showing up twice, which isn't wanted.
Change-Id: I1306b71122a210c55871ff8e14d2b5a04012cc4e
In preparation of giving the user a list to choose from add displaying a list
of all devices connected. Since devices might be ambiguous (multiple devices
share the same USB ID but detecting by other means failed) the listed devices
might exceed the number of actually attached ones.
Change-Id: Ice52da15523e5f3493a6fb687392301c4d5b8a36
Even with volume at minimal fuze+ was still playing sound pretty loud.
this fix it.
Change-Id: I5b18e9c39ced240eebb0457c433b0ca150668860
Reviewed-on: http://gerrit.rockbox.org/621
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
The version.sh tool tries to locate the repository root if no argument is
given but it doesn't really work. Instead explicitely give it the path to
the root.
Change-Id: Ie3a35cb3d41bbd8819823358763f714ad045527e
This fix FS#12895, Menu has no effect in EQ context anyway...
Change-Id: I31f8e1fdfea1479efd75cb411125e08eafade403
Reviewed-on: http://gerrit.rockbox.org/620
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
This is an improvement for the special
mode present in the samsung ypr0 target.
Apart adding new useful functionalities, it
fixes a random disconnection bug, solved by debouncing
and fully support to YP-R1 target.
This opens also the possibility to interface
this operating mode to rockbox USB functionality.
Change-Id: Id70541541fcfaa1234328485fab0696a3bd491c9
fixed a bug concerning bytes padding, since it wasn't correctly
implemented regarding original firmware structure.
This fixes ROM generation especially for ypr1.
Change-Id: I1a40fb4bb8f9d6b005d694246123e314c4d19b49
Reviewed-on: http://gerrit.rockbox.org/616
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
They have been rewritten for being completely free and
as fast as possible.
Successfully extracted, patched, repacked and flashed
original firmware (tested on device and it worked)
Change-Id: I74d47d13f2dc3a2832a0d6821d3c2182dfd4b33b
Reviewed-on: http://gerrit.rockbox.org/506
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
This will be required by the R0 port. Generating C source with 24bit data is
not supported yet because Rockbox doesn't support this depth yet (and has no
data type for it).
Change-Id: I6474a6d32bb7942661bac833bb3348073335e25c
This one is a bit strange: our codebase just don't use it if there is both
SD and MMC, so this missing function got unnoticed so far.
Change-Id: Ifea4bb5140477b7637d033737594259cc44fb10e
The i2c core has some bugs: it locks up when the slave doesn't NAK and
prevent the dma channel from being resetted. Specifically handle this
situation by setting CLR_GOT_A_NAK (workaround) and then reset dma and i2c
block.
Change-Id: I0e09d38d4301a0ad42dfad785cc934b43f2c4485
Target that have a touchpad/touchscreen should disable it while
being locked (In order to avoid LCD to drain battery power due to
"key locked" constant reporting messages. If they a have a keylock
button this was already handled at driver level. If not (e.g. fuze+),
they will have to implement a switch at driver level that action.c
can operate on softlock.
This patch does the following for any target having a touchpad
or a touchscreen and no HAS_BUTTON_HOLD (ie any softlock target)
1) it implements the code to call button_enable_touch(bool en) in
action.c.
2) button_enable_touch is implemented in button.c and call
either touchpad_enable or touchscreen_enable
3) those two function are implemented respectively in touchscreen.c
and a new touchpad.c file. They provide a generic way to silents touch's
device and call a function at driver level where target specific code
can be implemented if possible/needed (for power saving for instance).
Those function name are touchpad_enable_device and touchscreen_enable_device
4) we implement an empty function at driver level of targets that need it
to have them still being able to compiled.
Change-Id: I9ead78a25bd33466a8533f5b9f259b395cb5ce49
Reviewed-on: http://gerrit.rockbox.org/569
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
ACTION_STD_MENU seems to be an important keymaps. We map it to
BUTTON_BACK and keep cancel on the BUTTON_LEFT
Change-Id: Iea4a1e4671faee376ad4200b08ca82c2d00d1ff9
Reviewed-on: http://gerrit.rockbox.org/571
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
This quick and dirty utility allows to extract nand bootloader
from raw 1st nand block dump. I post it mainly to somewhat
document how BCH error correction engine of the rk27xx works.
Change-Id: I37ca91add7d372e3576d2722afc946d0f08971a9
