Several of the problem samples on the tracker use values outside this
range. Trying the larger table doesn't quite seem to fix things, but
its only a small amount of additional memory and looking at ffmpeg,
I think the larger table is correct.
Change-Id: Id046e62b68550701aa1f80c9abd0a1dcd711bd0d
No known samples are fixed by this problem, but I haven't tested many.
Backport of ffmpeg revision 26388.
Change-Id: Ife9654b7477a432834e3cab2cb43d16da071445a
1) Change the image with a clean one
2) add keymaps indication
Change-Id: I0d3fff317406809523fb34282df058fe2e074a2c
Reviewed-on: http://gerrit.rockbox.org/173
Reviewed-by: Peter D'Hoye <peter.dhoye@gmail.com>
Tested-by: Peter D'Hoye <peter.dhoye@gmail.com>
Because DMA descriptors needs to be committed and discarded from
the cache, if they are not cache aligned and/or if their size
is not a multiple of cache ligne, nasty side effects could occur
with adjacents data. The same applies to DMA buffers which are
still potentially broken. Add a macro to ensure that these
constraints will not break by error in the future.
Change-Id: I1dd69a5a9c29796c156d953eaa57c0d281e79846
Sometimes I do want to update outside the screen boundaries and it was
messing it up; such things should not cause display problems.
Change-Id: Ic9deec609b19e5a1c603601b20c66599dd44f892
This change is motivated by the ATA specs, section 9.2 Software reset protocol
(quote):
A host should issue an IDENTIFY DEVICE and/or IDENTIFY PACKET DEVICE
command after the software reset protocol has completed to determine the
current status of features implemented by the device(s).
This indeed fixes a local issue with an SSD in an iriver h320. No other tests
were carried out.
Change-Id: I191444aec3e55f6890020f601c715d0022d09fb6
Reviewed-on: http://gerrit.rockbox.org/218
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Reviewed-by: Linus Nielsen Feltzing <linus@haxx.se>
Reviewed-by: Peter D'Hoye <peter.dhoye@gmail.com>
Tested-by: Peter D'Hoye <peter.dhoye@gmail.com>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
Overlay plugins got broken because ovl_offset.pl assumes the audio buffer
ends where the plugin buffer starts. Buflib however keeps its handle table
there, so there are a few hundred bytes fewer available, so loading the
overlay fails. We work around this by linking the overlay at a slightly
lower address (1024 bytes lower). If the handle table ever grows more than
that, overlays will start failing again and we either need a different
solution or increase the margin a bit.
Change-Id: Id98cb52da2c8c4a4bc773362a46f646774112f85
Instead of showing the internal language names show some more human friendly
string. Currently only applies to the voice creation dialog, the language
configuration dialog needs further adjustments to support display strings
differing from values.
Change-Id: Ic94838f1079c1d09a666d7dbd9682c577f686b3f
Since Rockbox Utility could only install the most recent "daily build" there is
not much difference to the most recent development build so the option was not
really useful.
Additionally update naming. Former "daily" builds are now "archived builds" and
can get installed manually (if necessary), and "current" builds are renamed to
"development build".
Change-Id: I748688d544b6d9868f7495f30933637bf9ff5e50
The freescale firmware partitions has a lots of quirks that
need to be dealt with, so do it the proper way.
Change-Id: I8a5bd3fb462a4df143bc6c931057f3ffedd4b3d3
The icoll code now has an IRQ storm detection mechanism which
will prevent the device from hard freezing in case it happen.
Change-Id: I9861238dce61d29af1e48f9c534ec63a7f23465c
mr100 audio is broken in 3.11. It's working again in master since
da6cebb6b0, but backporting that is
not realistic.
Change-Id: I11118a0d228da866259e4e01ed00ac010a3838a3
