Basically it uses the default SI4700 radio chip driver, the only thing that's different is the I2C access,
written specifically to interact with my kernel module.
Next things to add are:
- RDS support!
Change-Id: I0ed125641e00f93124d7a34f90dd508e7f1db5a4
Signed-off-by: Lorenzo Miori <memorys60@gmail.com>
To support fm radio a kernel module was written. This module is added to
the patched firmware that loads Rockbox. It's pre-compiled but its source
archive provided.
The kernel module provides raw-access to the built-in si4709 radio chip.
Our existing si 47xx drivers can be re-used this way.
The module itself was written Lorenzo Miori, I only integrated it
into the tree.
Change-Id: I6205d28a505d57791eaeb627e6856b9a1eaeaeaa
Emulates the basic "Meier" crossfeed (2 capacitors, 3 resistors)
as discussed in
http://www.meier-audio.homepage.t-online.de/passivefilter.htm
This crossfeed blends a bit of low-pass filtered L signal into
the R signal (and vice versa) while adding about 300 us delay
to the crossfed-signal. A difference with the crossfeed already
present in rockbox, is that this algorithm keeps the total
spectrum flat (the one currently in rockbox accentuates
low-frequency signals, making it sound a bit muffled).
This implementation is quite lightweight, just 3 multiplies per
left-right pair of samples. Has a default C implementation and
optimized assembly versions for ARM and Coldfire.
The crossfeed effect is quite subtle and is noticeable mostly
one albums that have very strong left-right separation (e.g.
one instrument only on the left, another only on the right).
In the user interface, the new crossfeed option appears as
"Meier" and is not configureable. The existing crossfeed is
renamed to "Custom" as it allows itself to be customised.
There is no entry for the user manual yet.
Change-Id: Iaa100616fe0fcd7e16f08cdb9a7f41501973eee1
Doesnt fix an actual bug because closing a handle is a no-op on all
native targets and others dont use overlay.
Change-Id: Ie55e3fd4abd08b174d86ca25aed54a970dddbebd
Refactor native/hosted implementation seperation while at it
(no wrappers starting with _ anymore).
Change-Id: If68ae89700443bb3be483c1cace3d6739409560a
The logic got broken by 6b8330d2.
Since the ifp700 port is basically unmaintained and unfinished and doesn't
build anyway, we can remove the special-casing for it. This simplifies the
logic to "hosted or native, except for bootloaders", which simplifies
further to "not bootloaders".
Fixes FS#12685
Change-Id: Iaaad534067da22b74bf647aa58dcbb678bbc5f70
When allocating the voice buffer, it's supposed to start at the beginning
of the audio buffer, not at the end of the voice buffer. ;-D
Might clear up a thing or two.
Change-Id: I94796ff21090bcc56813cdc569957a1a9178abcd
Instead of using the date the voice file was created use the version of Rockbox
the voice file was created for. That way it is possible to see from the
installation log if the installed voice matches the current Rockbox version.
Change-Id: I9fd7d40d718febafbc20579f049b9b94cfa5d573
Instead of using some arbitrary and not really useful string use the timestamp
of the downloaded file if version string is provided by the caller. This also
makes it possible to check if the downloaded file is actually a different one.
Use it for manual and game file downloads, as this gives more reasonable values
than using the date transmitted for daily (archived) build and as support for
archived builds will be removed shortly.
Change-Id: I0c751fabe7bb516edca93a5f73f077a611d4ef87
Apparently I got the "just-in-case" RXFIFO purge in there before the
RXFIFO was enabled, causing severe hardware spasms.
Change-Id: I2ea4b6d28e06372b61cb3f21ab2fce71dd408213
When it was inactive but enabled, the format change hook was dropping
through to code that it shouldn't execute without it also being active
in processing samples.
Change-Id: Ie7899df0395d3f0d10f2bf2b55ea549dd06749a7
Implement PLL enabling/disable and unconditionally power the PLL
on startup. This is needed at least on the Zen X-Fi2.
Change-Id: Ib9ddfdeaf973cedded4b3586dd16aa95a61e78ba
...by default where they would be interpreted as valid but not actually
be which would cause calls to buffering while it was not initialized.
Add BUFFER_EVENT_BUFFER_RESET to inform users of buffering that the
buffer is being reinitialized. Basically, this wraps all the
functionality being provided by three events (...START_PLAYBACK,
RECORDING_EVENT_START, RECORDING_EVENT_STOP) into one for radioart.c,
the only user of those events (perhaps remove them?) and closes some
loopholes.
Change-Id: I99ec46b9b5fb4e36605db5944c60ed986163db3a
Commit bb24ac8c27 replaced the
\opt{iaudiom3,iriverh100} with \opt{remote} which isn't true in the
Iaudio M3 case as this feature is dependent on HAVE_REMOTE_LCD and
the M3 uses this screen as main lcd so doesn't define it. Use the manual
HAVEREMOTEKEYMAP for now as I didn't find a suitable other define yet.
Change-Id: I58b2abd2f7cae1a821cea297a2b4c002a3420493
Make this info available for all bitmap targets, also ones that only need it
in the pictureflow description. Shuffle some lines around so that it doesn't
need too many opts. Fixes FS#11350.
Change-Id: I5268483c7a1d765c8a994614442309b05de1d832
Create symlinks to the iaudiom3 graphics to not duplicate the picture itself
and to not lose the precise 'addressing' of the picture. Change the manual's
makefile to follow symlinks for this to work (thanks to Dominik and Jens for
the help there).
Change-Id: I5882880cb22cbf5561cb0872d7889b7c8c42b62e
Change-Id: I49ce0bfdc228bed55d47b5e743a7fa87ccd4da8a
Reviewed-on: http://gerrit.rockbox.org/197
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Several of the problem samples on the tracker use values outside this
range. Trying the larger table doesn't quite seem to fix things, but
its only a small amount of additional memory and looking at ffmpeg,
I think the larger table is correct.
Change-Id: Id046e62b68550701aa1f80c9abd0a1dcd711bd0d
No known samples are fixed by this problem, but I haven't tested many.
Backport of ffmpeg revision 26388.
Change-Id: Ife9654b7477a432834e3cab2cb43d16da071445a
1) Change the image with a clean one
2) add keymaps indication
Change-Id: I0d3fff317406809523fb34282df058fe2e074a2c
Reviewed-on: http://gerrit.rockbox.org/173
Reviewed-by: Peter D'Hoye <peter.dhoye@gmail.com>
Tested-by: Peter D'Hoye <peter.dhoye@gmail.com>
