Since eec89a9 icons have been centered using same calculation as for fonts.
In edge cases this is visually different from before and didn't align
well to the font's baseline. Revert to the old calculation just for centering
icons to fix.
A proper aligorithm would take the baseline into account but this has
worked sufficiently well for us (fix this if needed)
Change-Id: I86593529b16cd28ae4552641e216e73795f2450c
A missing comma messed the lookup table up :'( Be aware that the kernel
on the ypr0 doesn't support many codepages in which case its default (iso8859)
will be used.
Change-Id: Iaa4a4b8338fb047d29f6a4e2a80eba5c296d27ce
"/" couldn't be opened. This regression was introduced by 731072d. Trailing
slash should not be stripped for the root directory.
Change-Id: Idd2d9b1f33e7be789bcf432e586e6715eb4152f4
Especially on hosted dir_get_info() can be relatively. It is commonly called
after every readdir() for further information about the dir entry. So it's
peformance compared to readdir()-only is interesting.
Change-Id: I03ab41fb190acf738e04a5d3b2a4fe29276094f6
This is needed for readdir() and dir_get_info() to work properly because
they depend on hash/path matching.
Change-Id: Ibd23def10eebabd76cdddac2739a5274159e88a9
It's quite rare that it is called for a symlink to a directory. But it only
needs a second syscall to stat() if that happened. Therefore speed up the
common case by avoiding an unecessary second syscall.
Change-Id: I911105f76631ebccc7696a1540e9cf069a706000
The two functions need to check whether they are called for a specific path
to implement the virtual mount point for the external storage. This
is statistically rare and a hit on the common case. Therefore speed up
the common case by performing integer comparision first, and only expensive
string construction and comparision if that succeeds.
Change-Id: I3c41fe073e1f4f8eb62d2b8556a36937c9cb8290
A thread polls the appropriate GPIO pin for sd card presence and mounts
using the mount system call.
Change-Id: I31ab41c4120f4af64eb6998b7e7b6f9051585efb
The external storage will be created during make install, as simext folder in
the build directory. Upon pressing the e key the sim will mount (virtually
) this into the root directory. It can be accessed in the same way as an
sd/mmc card on real targets. This requires quite some path trickery in io.c.
Change-Id: I2fa9070a3146101ec5655b5b4115ca349d1d4bf4
Part of this change is to align sdlapp builds to other application targets
in that the sim_* wrappers are not used anymore (except for sim_read/write).
Path mangling is now done in rbpaths.c as well.
Change-Id: I9726da73b50a83d9e1a1840288de16ec01ea029d
The iocharset mount option names the codepages slightly differently and
must be translated properly.
Change-Id: I147a256e3453136282244201c27225a30cdfdca0
The virtual external storage can be inserted/extracted with the e key. This
has little effect because there is no way to access the storage (yet, a later
commit will change this). Except on ondio where the mmc needs to be
extracted before entering USB (like on real target).
Change-Id: I523402832f3b4ae71e0603b281aba4fb8592a897
CONFIG_STORAGE & STORAGE_HOSTFS allows to use parts of the storage_* API to be
compiled for application targets without compiling storage.c or performing
actually raw storage access. This is primarily to enable application targets to
implement HAVE_MULTIVOMULE/HAVE_HOTSWAP (in a later commit).
SIMULATOR uses the same mechanism without explicitely defining STORAGE_HOSTFS
(how to add a bit to an existing preprocessor token?).
Change-Id: Ib3f8ee0d5231e2ed21ff00842d51e32bc4fc7292
This driver will subsume the old button-lradc driver and support far more
options. It can sense LRADC channels, PSWITCH, GPIOs and it handles special
"buttons" like headphone insertion and hold detection. It also provides a
more natural description of the buttons using a target-defined table with some
macros to make it easy to read and write. It uniformely handles debouncing on
LRADC channels and PSWITCH.
Change-Id: Ie61d1f593fdcf3bd456ba1d53a1fd784286834ce
On some OSes like Windows or if running in a virtual machine, the one second
timeout might be too short.
Change-Id: I717f7a2aaed1cb3d40e8fbe6f9b1081b43ceea95
Original fix by Marcin: it had a problem because crt0 on imx233 is more
complicated than many targets: since we use virtual memory, we first disable
the MMU, then move the entire image (including init and itext stuff), then
setup a temporary stack to setup the MMU. Only when the MMU is enabled, can
we move the init and itext stuff to its right location and finally boot.
This requires some trickery because:
- the initial move copies everything, including init and itext
- the stack overlaps with init and itext to reclaim space
- the temporary stack cannot be the same as the main stack to avoid trashing
the init and itext code, also it needs to be a physical address
Change-Id: Ibaf331c7d90b61f99225d93c9e621eb0f3f8f2dc
Rework the irq code, to put more code in the C part. When interrupt
nesting is enable, Rockbox gets pretty unstable so disable it for now.
Change-Id: Iee18b539c80ea408273f6082975faaa87d3ee1b6
