This does not scale the EMI frequency and keep the processor
betweel 261MHz and 454MHz. It can still be improve. The auto-slow
divisor could still be change, 8 seems reasonable for now
Change-Id: I639bb3f6b7f8efedc7dc58d08127849156eeb1b6
Implemented scheme:
ARM AHB APB
Normal 50 50 50 MHz
Max 200 100 50 MHz
Frequency scaling is disabled on rk27generic due to too
slow lcd updates when running with 50MHz AHB.
battery_bench shows ~1h runtime improvement on hifiman.
Change-Id: I2c6f8acf6d4570c4e14f5bcc72280b51ce13c408
Remove the old debug stuff about VDDx and add a clean api to
get/set the regulator (VDDD, VDDA, VDDIO, VDDMEM). This is useful
for proper frequency scaling.
Change-Id: Ia5a1a712fd66652a8ad9601ed00db31aba5a7561
Due to the way Archos devices (i.e. the only HWCODEC devices) boot,
memory is tight these days. Disabling LOGFDISK on them will make them
work for now. In the long term a better solution is needed.
Change-Id: Ifc6bb97a81cc33545294e319bbc0a6c499788d39
Implement cache aligned transfer of more than one sectors. The
current code now transfers almost all data at once by moving
it within the buffer to make it cache aligned. This greatly
improves the performance of the transfers, especially in mass
storage mode.
Change-Id: Ic6e78773302f368426209f6fd6099089ea34cb16
Further merge drivers by using the same command and data functions.
No use one mutex per drive instead of a global sd lock. Fix the
RCA handling which was different between SD and MMC (shifted 16)
and thus confusing. Add MMC commands definition to the mmc.h
header similarly to the SD one. Change MMC handling a bit by
selecting/deselecting on each transfer like SD, which allows
for several MMC devices in theory and is more uniform.
Change-Id: I7024cb19c079553806138ead75b00640f1d2d95c
Merge sd and mmc drivers into a single sdmmc driver. This allows
some factoring of the code and simplify bug fixing. Also fix the
dma/cache related issue by doing all transfers via a correctly
aligned buffer. The current code is not smart enough to take
advantage of large user buffers currently but at least it is safe!
Change-Id: Ib0fd16dc7d52ef7bfe99fd586e03ecf08691edcd
There are tricky DMA/cache related issue on the imx233 which could
pop up with the old driver. The new one ensures that all dma
tranfers are cache safe by using an intermediate buffer.
Change-Id: I72060682d1c285c83ae16455cfdb62f372b5d687
Reduce DMA maximum transfer size since transfering 64Kb requires
to set a size of 0 and it's not worth adding checks everywhere
to handle this special case. Also add statistics about unaligned
transfer (wrt to cache). Update debug screen accordingly and
simplify it so it can fit smaller screens too.
Change-Id: I18391702f5e100a21f6f8d1ebab28d9f2bd8c66f
Also, add dummy defines for application targets so that ERRORF, etc
map to DEBUGF instead of a compile error and add a new line at the
end of logf.c.
Change-Id: Ie7c5bc3397a853af619e810defce6123114e7a51
Logs information, errors, etc to disk using the register_storage_idle_func
mechanism to write to the disk when available. Currently, this is disabled
in normal builds, but can be enabled by adding ROCKBOX_HAS_LOGDISKF to the
config file. By default, it uses a 2KB buffer and drops text if the buffer
overflows.
The system includes a simple warning level mechanism that can be used to by
default exclude non-serious errors from logging on release builds.
Change-Id: I0a3d186a93625c7c93dae37b993a0d37e5a3a925
Reviewed-on: http://gerrit.rockbox.org/288
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Tested-by: Michael Giacomelli <mgiacomelli@gmail.com>
Reviewed-by: Michael Giacomelli <mgiacomelli@gmail.com>
It was also broken functionally, probably since a while.So restore the
functionality. Run it on the dap, the tcd files will be placed into .rockbox folder.
Change-Id: Id7a6ce4389dfaf99799258902be80d630af0601c
operation.
The interal ROM clock seems to be needed to reboot the player, so disabling
it is too dangerous. Hopefully this will prevent problems where crashes during
the abort handler resulted in a stock player that needed the battery to drain
in order to reboot.
Change-Id: I7d1e64743dde15b64d718ad3255dada3d570736f
The main reason for this is to be able to downscale the sdl app, which
when used for designing themes for android tends not to fit on laptop
screens these days.
Change-Id: Ib52731dbebcdd03a572be7754c157471165eb2df
6b8330d was not the correct fix. In fact, it prevents settings from being
written as there's no DISK_EVENT_SPINUP event, so they were only saved on
proper shutdown.
Change-Id: Iad26366f2821ed6adf445c391d461563c5782a71
Our current PS and RT parser is very strict: it requires
all segments to be received in order. This is too strong
of an assumption even when the reception in good, particularly
for long RT messages. This parser handles segments in any order
and completes a message only when all segments are present. To
avoid keeping obsolete segments, each segment has an associated
timeout and is trashed if not updated for a certain period.
Change-Id: I79841bb5ab1f838c7702d8281044e226f6510199
Reviewed-on: http://gerrit.rockbox.org/237
Tested-by: Bertrik Sikken <bertrik@sikken.nl>
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Compute a serial number using the ocotp OPS bits like the OF.
Also add a comment about the first character of serial number
being a indicator of the enabled interfaces.
Change-Id: I9b90aed4e3b803f12fec003c9bc8ee8a046f4e42
Basically it uses the default SI4700 radio chip driver, the only thing that's different is the I2C access,
written specifically to interact with my kernel module.
Next things to add are:
- RDS support!
Change-Id: I0ed125641e00f93124d7a34f90dd508e7f1db5a4
Signed-off-by: Lorenzo Miori <memorys60@gmail.com>
Refactor native/hosted implementation seperation while at it
(no wrappers starting with _ anymore).
Change-Id: If68ae89700443bb3be483c1cace3d6739409560a
The logic got broken by 6b8330d2.
Since the ifp700 port is basically unmaintained and unfinished and doesn't
build anyway, we can remove the special-casing for it. This simplifies the
logic to "hosted or native, except for bootloaders", which simplifies
further to "not bootloaders".
Fixes FS#12685
Change-Id: Iaaad534067da22b74bf647aa58dcbb678bbc5f70
Apparently I got the "just-in-case" RXFIFO purge in there before the
RXFIFO was enabled, causing severe hardware spasms.
Change-Id: I2ea4b6d28e06372b61cb3f21ab2fce71dd408213
Implement PLL enabling/disable and unconditionally power the PLL
on startup. This is needed at least on the Zen X-Fi2.
Change-Id: Ib9ddfdeaf973cedded4b3586dd16aa95a61e78ba
1) Change the image with a clean one
2) add keymaps indication
Change-Id: I0d3fff317406809523fb34282df058fe2e074a2c
Reviewed-on: http://gerrit.rockbox.org/173
Reviewed-by: Peter D'Hoye <peter.dhoye@gmail.com>
Tested-by: Peter D'Hoye <peter.dhoye@gmail.com>
Because DMA descriptors needs to be committed and discarded from
the cache, if they are not cache aligned and/or if their size
is not a multiple of cache ligne, nasty side effects could occur
with adjacents data. The same applies to DMA buffers which are
still potentially broken. Add a macro to ensure that these
constraints will not break by error in the future.
Change-Id: I1dd69a5a9c29796c156d953eaa57c0d281e79846
Sometimes I do want to update outside the screen boundaries and it was
messing it up; such things should not cause display problems.
Change-Id: Ic9deec609b19e5a1c603601b20c66599dd44f892
This change is motivated by the ATA specs, section 9.2 Software reset protocol
(quote):
A host should issue an IDENTIFY DEVICE and/or IDENTIFY PACKET DEVICE
command after the software reset protocol has completed to determine the
current status of features implemented by the device(s).
This indeed fixes a local issue with an SSD in an iriver h320. No other tests
were carried out.
Change-Id: I191444aec3e55f6890020f601c715d0022d09fb6
Reviewed-on: http://gerrit.rockbox.org/218
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Reviewed-by: Linus Nielsen Feltzing <linus@haxx.se>
Reviewed-by: Peter D'Hoye <peter.dhoye@gmail.com>
Tested-by: Peter D'Hoye <peter.dhoye@gmail.com>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
The freescale firmware partitions has a lots of quirks that
need to be dealt with, so do it the proper way.
Change-Id: I8a5bd3fb462a4df143bc6c931057f3ffedd4b3d3
The icoll code now has an IRQ storm detection mechanism which
will prevent the device from hard freezing in case it happen.
Change-Id: I9861238dce61d29af1e48f9c534ec63a7f23465c
