Based on emCORE.
Low level functions that do not depend on Rockbox kernel,
intended to be used by the bootloader, dualboot-installer,
RB drivers or other .dfu tools.
Change-Id: I3c616ded42260c6626bda23b7e580791981df61d
Based on emCORE.
Low level functions that do not depend on Rockbox kernel,
intended to be used by the bootloader, dualboot-installer,
RB drivers or other .dfu tools.
Change-Id: Iad369627b55bf1778eab437424072f1a653e4db6
During the bootloader install/uninstall process, a signal
is emitted when "Abort" button is pressed, the installers
can attach this signal and cancel the process.
Change-Id: I7f297b8031d7a2d93da0022081aaef03ef041baf
Useful for targets that needs multi-stage uninstall. On current
targets (with Uninstall capability) the progress is updated to
100% when bootloader uninstall is successfully finished.
Change-Id: I61be1c4f5cfc2d2f35fa5005962be9703888447d
This allows to implement multi-stage uninstallers. Should not affect
the behaviour on current targets.
Change-Id: Idf8aec5caf76cf9317798890d094a7cebdbcabec
Newer toolchains (both gcc and libc related) add a lot of warnings.
While these can be useful and correct, cleaning them up woult be a
lot of work and isn't likely to actually happen any time soon.
Change-Id: I8c4e8cd3dc92f9afa4bf003c63ca65e895e3ef00
- Some rewrite with the intent to get ride of these random errors
appearing on some builds/devices (not much noticeable on RB but
can ruin bootloader builds).
- Error handling (ACK).
- IIC clock increased to be the same as in OF.
Change-Id: Idf8cfa3c230a0a61ec9c879bf6f0ea8b061a4607
Add code to read USB D+/D- and accessory ADCs, it is shown in HW
debug menu, might be useful in future for RB and/or the bootloader
to identify external USB chargers.
Change-Id: Ia48ca5e06bb7ddc52bb55abedde6734653ce8dba
Based on g#844 and g#949, it is intended as a replacement for the
current s3c6400x USB driver.
The DesignWare USB OTG core is integrated into many SoC's, however
HW core version and capabilities (mainly DMA mode, Tx FIFO mode,
FIFO size and number of available IN/OUT endpoins) may differ:
CPU targets HW ver DMA NPTX FIFO FIFO sz #IN/OUT
-------- ------------- ------ --- --------- ------- -------
as3525v2 sansaclipplus 2.60a Yes Dedicated 0x535 4/4
sansaclipv2
sansaclipzip
sansafuzev2
s5l8701 ipodnano2g 2.20a Yes Shared 0x500 4/5
s5l8702 ipod6g 2.60a Yes Dedicated 0x820 7/7
ipodnano3g
s5l8720 ipodnano4g ? ? ? ? ?
Functionality supported by this driver:
- Device mode, compatible with USB 1.1/2.0 hosts.
- Shared FIFO (USB_DW_SHARED_FIFO) or dedicated FIFOs.
- No DMA (USB_DW_ARCH_SLAVE) or internal DMA mode.
- Concurrent transfers: control, bulk (usb_storage, usb_serial) and
interrupt (usb_hid).
Actually this driver is not used by any CPU, it will be enabled for
each individual CPU/target in next patches.
Change-Id: I74a1e836d18927a31f6977d71115fb442477dd5f
Apparently I simply forgot to calibrate it when the port was done and the
current values are just plain wrong, especially for the charging curve.
Change-Id: Ied3cafa52f31f182f953714e28edc4c5e891255f
There are two very suspicious things in the power off code:
- it does not properly unlock the power register, so it should fail (!)
- it does not disable sw/hw watchdog so if register fails, the device will
most probably crash horribly because of the watchdog
I don't even understand how it worked before.
Change-Id: I9f3f94bd012e52c3b50cd5b658d68b5eb907f79b
* Implements RFC 4226 (HOTP) and RFC 6238 (TOTP)
* Adds sha1.c to apps/plugins/lib (orignally tools/hmac-sha1.c)
* See manual entry for more information
Change-Id: Ia4a4031b29f97361b541e71438aa7f3ea82212f2
The old driver was bad in many respect, it had some race conditions, it was
using a thread to serialize transfers because of the legacy i2c interface.
It also had huge latency (typically 50ms but delays up to 300ms can happen),
thus some presses were missed.
The new driver takes advantage of the new i2c driver to do everything
asynchronously. It also does not need a thread anymore because queueing
ensures proper serialization. It provides much better and reliable latency
(typically ~2ms).
Also fix the debug screen which was horribly broken. The new screen also
displays the deadzones.
Change-Id: I69b7f99b75053e6b1d3d56beb4453c004fd2076e
The new driver provides several new features:
- asynchronous transfer
- transactions (several transfers executed at once)
- queueing
The style still provides the legacy interface.
Change-Id: I6d8ecc89d1f7057847c9b2dc69b76cd45c9c8407
* --static-libs isn't supported on some (possibly newer) SDL installs, falls back to --libs if this is the case
Patch mostly by Amaury Pouly.
Change-Id: I6dd2f4847f2a2d1de7b2d287c0af6651cec461ff
Map short menu press to context menu/quickscreen.
Map long menu press to return to main menu.
Also remove some stupid keylock mapping, that doesn't make sense.
Change-Id: I5f9b05af261bcbd2f0cf116f99570c4d853e0394
Always enable support for SET_BLOCK_COUNT on mmc: it is mandatory. For some
reason (probably a mistake) it was disabled unconditionaly on mmc.
Also deselect sd card after init. Although it is unlikely to make a difference,
it is already done for mmc so stay consistent.
Change-Id: I276f0d95f5bb6a0bf431c2fff4589d3dfb15f8c7
The screen currently displays for each device the bus width, set_block_count
support, HS capability and whether it is enabled for not.
Change-Id: I6b1c3b1019e55ef1097a23c1f54fb07f5c7aa3b0
