On all players, it should be possible to return from the Main Menu
by pressing the Back or Menu key. Unless I'm missing something...
"Clear Playlist" has hopefully become superfluous after the "Playing Next"
context menu was added, which offers similar functionality.
Change-Id: I741544978fb7936b8d5a34dfc656472e20c1737e
After launch, PictureFlow always goes to the currently playing
album, or to a selected album, if applicable. Which is probably
a useful default, but not always wanted. You can now get back
to the album you were looking at when PictureFlow was last
closed, or when the sorting was last changed.
Change-Id: Iba3e0d5388f6b49534d09fe0224b0dbfa65d5f1d
This lets players that can't spare any keys scroll through
albums without leaving the track listing first, which was
only possible on the M3K before.
Enter mode from Main Menu. While active, the gradient
highlighting an album's selected track will not appear,
and context menu options apply to the whole album
instead of to a single track.
Exit mode by pressing buttons for Select/Back, or by
quitting PictureFlow.
NB: Be sure to enable "Database in RAM" for a good
experience, as the loading time for each album can
become quite annoying otherwise.
Change-Id: Id6c9a8cc49e4cfb2aea958610b95a19887f496b6
I couldn't seem to reproduce the issue here:
https://forums.rockbox.org/index.php/topic,54165.msg252081.html#msg252081
but I figure its probably a threading issue
so we now have a mutex on the cache
and to top it all off each cached entry has a crc and length that are
checked before writing the entry to the file otherwise it is prepended
with # FAILED - so hopefully scrobbler 'parsers?' don't barf on the log
Other changes:
there is now a MRU table for tracks this should help prevent duplicates
it is configurable..
the cache buffer now no longer uses fixed chunks allowing more tracks
to be written between flushes
Change-Id: Iaab7e3f6a76abfc61130f3233379a51c9a6d12e5
First was an off-by-one bug in the loop over buffers. The condition was
`i < this->hidden->n_buffers', but should have been <=, not <. This wasn't
a critical issue, because the last iteration would check the currently
playing buffer - an unlikely situation.
The second logic bug would make the code always think it had found an empty
buffer, even when it had not, since `idx' was being unconditionally set
every loop, rendering it unusable for a sentinel value. Fix that.
Change-Id: I137330965d699acf827e59b6aa5c5f9ddf2ca617
a plugin to view lastfm scrobbler logs
uses print cell to give a spreadsheet view of scrobbler logs
buffers the whole file if possible otherwise it reads entries from disk
rudimentary text searching for columns
include / exclude; all/any and case sensitive
Change-Id: Id9616e5796658952fba4ea747f596cb77d6f34c0
When displaying Track Info for multiple tracks,
the value for combined file sizes or length was
capped at 2 GiB / ~596h.
Limit has been raised by a factor of 1000.
Change-Id: I942c64e81864cba3f719c83a24912883fafeb70e
- get_albumart_for_index_from_db:
slide_index not allowed to be -1
- Fix visual glitch changing scroll direction:
An errant frame was displayed when switching
from one scroll direction immediately to the other
- Rename/combine functions and replace
magic numbers for zoom animation
- iPods: Fix inability to skip or reverse zoom animation
using Back button
Change-Id: I888c3c437bb123325813bf79be56b320cfbfda0c
opx shortcuts allow an easy way to add parameters to plugins
you should be able to set them as shortcuts now
the plugin hd a use after free bug on the dat file file descriptor
Change-Id: I5fe3b0628e7da003c03b9b54f5788b0d0dbfea74
save tsr plugin path for later
resume tsr plugin when user stops the interrupting plugin
expand return of tsr_exit function to allow
continue, suspend, terminate
tsr plugins check parameter at start to determine if
the plugin is being resumed
Change-Id: I6fc70de664c7771e7dbc9a1af7a831e7b50b1d15
GCC 4.9 always emits assembly with divided syntax. Setting unified
syntax in inline assembly causes the assembler to complain about
GCC's generated code, because the directive extends past the scope
of the inline asm. Fix this by setting divided mode at the end of
the inline assembly block.
The assembler directives are hidden behind macros because later
versions of GCC won't need this workaround: they can be told to
use the unified syntax with -masm-syntax-unified.
Change-Id: Ic09e729e5bbb6fd44d08dac348daf6f55c75d7d8
Any modifications to the playlist (insert, delete, shuffle, etc)
will cause the modified flag to be set. The flag is cleared when
the playlist is saved. Code that generates playlists can manually
clear the modified flag if appropriate; there is now a proper API
for this so the tagcache and pictureflow don't need to resort to
hacks.
Change-Id: I8d3c723265a41db07a13de3f1d2abb0444528d57
Replace the minimum version bound with a check on the size of
the API struct. The version only needs to be incremented for
ABI breaking changes. Additions to the API won't need to touch
the version number, resulting in fewer merge conflicts.
Change-Id: I916a04a7bf5890dcf5d615ce30087643165f8e1f
add some faster options to the track menu
add a shortcut for basename formatting
sort basename results
filename - by sorted filename
title - just title no formatting untagged items are unsorted as well
title mm:ss - title and duration
Change-Id: I90aea95051f6231580ef7f1fc08cd2d0d69601fb
This is all but guaranteed to be broken since pdbox doesn't use
SHAREDBSS_ATTR or SHAREDDATA_ATTR, needed to share memory safely
with COP threads.
Judging by the codec performance comparison on the wiki, if the
iRiver H100 and H300 can run PDbox on one core, PP targets should
have no problem doing it - they are 2-4x faster even on codecs
that don't have multi-core optimizations.
Change-Id: I8f556013146cb670f69cc42e80b1c768ba0f74cd
The perceived loudness change of a change in volume depends
on the listening volume: at high volumes a 1 dB increment is
noticeable, but at low volumes a larger increment is needed
to get a comparable change in loudness.
Perceptual volume adjustment accounts for this fact, and
divides the hardware volume range into a number of steps.
Each step changes the dB volume by a variable amount, with
most of the steps concentrated at higher volumes. This
makes it possible to sweep over the entire hardware volume
range quickly, without losing the ability to finely adjust
the volume at normal listening levels.
Use "Volume Adjustment Mode" in the system settings menu
to select perceptual volume mode. The number of steps used
is controlled by "Number of Volume Steps". (Number of steps
has no effect in direct adjustment mode.)
It's still possible to set a specific dB volume level from
the sound settings menu when perceptual volume is enabled,
and perceptual volume does not affect the volume displayed
by themes.
Change-Id: I6f91fd3f7c5e2d323a914e47b5653033e92b4b3b
Enables the use of PictureFlow and the Properties plugin
with parent tables of ALLSUBENTRIES, such as an album
or album artist, instead of individual tracks.
Change-Id: I18c4779ed116a48c732ae32b9629e7e0d93ce7c8
- Move multiple-id3 functionality into lib
- Extract retrieve_id3 function
In preparation for using these functions
from the Properties plugin.
Change-Id: I7252581340680e32df763f1f4b41646a055fe19e
This was added in commit d553bb1 and
doesn’t seem to be used anymore.
Return PLUGIN_OK since an error message
is already produced.
Change-Id: I5eaf7e7eb7c850a6fa9c3d2717c440e335f5efd1
Context menu gains new option to view
metadata for individual tracks or albums.
Will display an album's length and total file size.
Other fields are displayed only if they are identical
across all tracks (except for the album year, which
is determined by the highest value encountered).
Change-Id: Ibc14cfaf2cb3d91b8d1cfbee05c6261db4975355
In commit f3358eb, the Properties plugin started using the
Track Info screen for audio files, which didn't show when
the file was last modified. This adds it back.
Change-Id: I3ce519da234a4bcadab1d64b67de0298cada8f6e
Commit 1930ca8 repurposed the 'Logo' plugin's
logos, whose dimensions are different from those
used by show_logo, which was previously called
to display the logo.
Change-Id: I4d0c5f597dadfdadae244d895518bbcfefebb581
Do not spawn threads on COP as PP lacks cache coherency between cores,
making it unsafe to access cacheable memory that might be accessed by
the other core.
Change-Id: Idf910e9cc9dad3f0bf5bdb63800ed4abaa97558a
fiio m3k native is currently the only player with
defined buttons different from the standard
mapping.
This allows the user to use the keyremap plugin
to specify differing keymaps for their device in the locked state
Change-Id: Ie0b447bba0d5978e8d23fed423df30c794afc6f9
Add context flags to keyremap
CONTEXT_LOCKED
CONTEXT_REMOTE
CONTEXT_REMOTE_LOCKED
--CONTEXT_PLUGIN-- Removed -- Plugins need a custom action list
supplied and a method of supplying them
Change-Id: I5201d275ad0ab6130c2d05d5afb0c450f5c1746c
browse_context was missing its root causing a NULL deref
Export User Keys was looking for at least 4 entries when it only needed 3
Change-Id: If92ecccb36bd54e1b850ac2a969fe262b5d7fd14
After finishing a game of Xobox, background and
foreground were both the same color, making the
high score table invisible..
Change-Id: Iab4bad0e7d3f247a4b600ff9ec8e57207bc3832f
Missing from faa2cb9
- Thrust is now Right instead of Menu
- Teleport is Left instead of Play/Pause
- Pause is Play/Pause
Change-Id: Idd9758a68250bcfb2adec14589dffbe1a091511c
- Reduce need to press multiple buttons at
the same time to quit a plugin
- Have "Menu" be default way to quit plugins or
to access plugin menu
- Fall back to (Long) "Select" or Long "Menu"
in cases where Menu button isn't available
(e.g. in ImageViewer and many games)
out of scope:
boomshine, lua_scripts, Rockpaint,
Doom, Duke3D, Pacbox, Quake,
Sgt-Puzzles, Wolf3D, XWorld,
Minesweeper, Pixel Painter, Spacerocks
Change-Id: I6d4dc7174695fe4b8ee9cbaccb21bdbfe6af5c48
nets about 5k on clipzip (less on mono, more on others)
to move rockboxlogo to .initdata section
Remove show_logo completely and move to main.c
remove plugin stub
give credits plugin its own copy
credit fallback is now show_info()
Change-Id: Id9ed787e605ed29e7ab1e7a74d3821cd0f840ed4
Prefer to use designated initializers to avoid having to specify
unneeded parameters. Non-initialized members are zero-initialized
by the compiler.
Change-Id: Ia6a03c45cb3ef0b30f458d7d0ae1604a350c737c
Now that all users have replaced setting IDs with direct pointers,
find_setting() and friends don't need to return an ID value.
Change-Id: I8c5c31bb68d3bca5350d43538335265a55fd5517
