a plugin to view lastfm scrobbler logs
uses print cell to give a spreadsheet view of scrobbler logs
buffers the whole file if possible otherwise it reads entries from disk
rudimentary text searching for columns
include / exclude; all/any and case sensitive
Change-Id: Id9616e5796658952fba4ea747f596cb77d6f34c0
Instead of putting "#ifdef LCD_STRIDEFORMAT" at every usage of the
macro it's simpler to have config.h define LCD_STRIDEFORMAT to the
default of horizontal stride when the target leaves it unspecified.
Change-Id: Ib187012aad65ac678dbd837b1464a83bad722411
This is intended for testing USB event delivery to TSR plugins.
Usage:
1. enter plugin -> select Start
2. plug and unplug USB
3. reenter plugin -> select Status
it should display "State: disconnected" then "Prev: connected"
4. when done -> select Stop Plugin
Change-Id: I6c70f452db642f3fcbfbcb4f06c57f93e60f4cfd
This plugin provides a menu for easily editing the root redirect file
on targets that support multiboot. You can select a new root from a
list of Rockbox installations detected on the filesystem or remove all
redirects to boot from the default location.
To avoid searching the whole filesystem, only subdirectories of the
volume roots are checked for valid installations. Only installations
that are compatible with the current player will be displayed.
Change-Id: I7dcbadfd97873b87817870e61d2ae37956d2da00
allows items to be moved around with less code changes
remove scrolling I was not overly impressed with it
add test_kbd plugin
Change-Id: Ic183c7221bda9405891632704f3a7bbfd79bfe83
results of an idea I discussed in IRC
changed the way the lookup in the remap file works..
entries consist of 3 int [action, button, prebtn]
context look up table is at the beginning
action_code contains the (context | CONTEXT_REMAPPED)
button_code contains the index of the first remapped action for the matched context
[0] CORE_CONTEXT_REMAP(ctx1) offset1=(3), count=(1)
[1] CORE_CONTEXT_REMAP(ctx2, offset2=(5), count=(1)
[2] sentinel, 0, 0
[3] act0, btn, 0
[4] sentinel 0, 0
[5] act1, btn, 0
[6] sentinel, 0, 0
Note:
last entry of each group is always the sentinel [CONTEXT_STOPSEARCHING, BUTTON_NONE, BUTTON_NONE]
contexts must match exactly -- re-mapped contexts run before the built in w/ fall through contexts
ie. you can't remap std_context and expect it to match std_context actions from the WPS context.
-- Done --
Code for reading core remap entries
-- Done --
import of core remap entires from disk
-- Done --
plugin to set new key mapping (the hard part)
The plugin is started and FULLY functional
you can add actions and contexts
you can change context, action, button, prebtn
delete keymap files
load keymapfiles
save user keymaps
test keymaps before applying them
loading keymaps to core still requires restart
-----------------------------------------------------------------------------------------------
Change-Id: Ib8b88c5ae91af4d540e1829de5db32669cd68203
rb_info is just a test plugin
just some info from the running rockbox install
the real star here is the generator scripts to make actions_helper.c and button_helper.c
Change-Id: I23f7bbdae3f2cffca2490c4df40bb13b0b5d5064
handles the folder selection for autoresume paths and database paths
folder_select uses the pluginbuf to build the directory tree
hopefully having it as a plugin will make it stop corrupting
TSR plugins like battery_bench and announce_status
I left the original include and source in the gui directory for now
there are currently no other users..
Change-Id: If40ccb5a2bec4286a0616c10dfa7e1479a592808
This also modifies the configuration file to include macros
defined in the H100 / H120 implementation.
Change-Id: Iae845889c98661ec548c04fc57e733dcc346c0f1
OP allows you to use Open With.. to call plugins with parameters
called directly it acts as a shortcut list for plugins
open_plugins.rock interfaces with the open_plugin core
When opened directly it acts as a viewer for the plugin.dat file
this allows you to edit the paths and parameters for
core shortcuts as well as your added plugins
If a plugin is supplied to the viewer it is added to the dat file
If instead the plugin has previously been added then it is run
with the parameters you previously supplied
-----------------------------------------------------------------------------
Added export to .opx files
this allows shortcuts to plugins with parameters to be called from
the file browser
Change-Id: Ib8b05a60b049fb1d5881031ca09a07e3307d375a
allows user to run plugin in background that voices
status messages
grouping is now working it counts ; as the end of a group
sleep timer remaining is not voiced if sleep timer is not active
TODO
manual entries
Change-Id: I39e8500df6440c07d2a3347513c749d5e155d1cc
Note: I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.
Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.
Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
This ports id Software's Quake to run on the SDL plugin runtime. The
source code originated from id under the GPLv2 license. I used
https://github.com/ahefner/sdlquake as the base of my port.
Performance is, unsurprisingly, not on par with what you're probably
used to on PC. I average about 10FPS on ipod6g, but it's still
playable.
Sound works well enough, but in-game music is not supported. I've
written ARM assembly routines for the inner sound loop. Make sure you
turn the "brightness" all the way down, or colors will look funky.
To run, extract Quake's data files to /.rockbox/quake. Have fun!
Change-Id: I4285036e967d7f0722802d43cf2096c808ca5799
This is a port of Wolf4SDL, which is derived from the original id
software source release. The port runs on top of the SDL plugin
runtime and is loaded as an overlay.
Licensing of the game code is not an issue, as discussed below
(essentially, the Debian project treats Wolf4SDL as GPLv2, with an
email from John Carmack backing it up):
http://forums.rockbox.org/index.php?topic=52872
Included is a copy of MAME's Yamaha OPL sound chip emulator
(fmopl_gpl.c). This file was not part of the original Wolf4SDL source
(which includes a non-GPL'd version), but was rather rebased from from
a later MAME source which had been relicensed to GPLv2.
Change-Id: I64c2ba035e0be7e2f49252f40640641416613439
* Changed keymaps to PLA and added to SOURCES and CATEGORIES file
* improved keymaps: implement wrap-around and key repeat
* change keymap according to screen orientation
* fix font size calculation
* use blocking button query in main loop
* replace tabs with spaces
* added manual entry
* added original author to CREDITS
Change-Id: Id67ae99cbb7a737c7f4608e278b77a389ac2ffa6
Original revision: 5123b1bf68777ffa86e651f178046b26a87cf2d9
MIT Licensed. Some games still crash and others are unplayable due to
issues with controls. Still need a "real" polygon filling algorithm.
Currently builds one plugin per puzzle (about 40 in total, around 100K
each on ARM), but can easily be made to build a single monolithic
overlay (800K or so on ARM).
The following games are at least partially broken for various reasons,
and have been disabled on this commit:
Cube: failed assertion with "Icosahedron" setting
Keen: input issues
Mines: weird stuff happens on target
Palisade: input issues
Solo: input issues, occasional crash on target
Towers: input issues
Undead: input issues
Unequal: input and drawing issues (concave polys)
Untangle: input issues
Features left to do:
- In-game help system
- Figure out the weird bugs
Change-Id: I7c69b6860ab115f973c8d76799502e9bb3d52368
* Implements RFC 4226 (HOTP) and RFC 6238 (TOTP)
* Adds sha1.c to apps/plugins/lib (orignally tools/hmac-sha1.c)
* See manual entry for more information
Change-Id: Ia4a4031b29f97361b541e71438aa7f3ea82212f2
- square sine tick and tock sounds (more annoying, more useful;-)
- optical indication of tics on display
- unification of mode of operation for SWCODEC and HWCODEC (tested on simulator)
Both playback and display drawing happen in main loop, always.
- operating in two modes now:
-- 1. classic dumb metronome
--- active when openened as application without file to open
--- the usual functionality with tapping and bpm change
--- controls indicated on display
-- 2. track mode with programmable series of parts
--- active when started as viewer for a .tempo file
--- differing meters (4/4, 3/4, 6/8, etc.)
--- patterns (tick/tock/silence on each beat)
--- smooth tempo changes in those tracks
This version had lots of testing regarding metronome accuracy,
resulting in the realization that PLL A and PLL B differ
on the Clip+, causing drift. There is still drift when the timer
intervall is too small, so I settled on 2 ms as compromise.
This is the final version, after adding documentation and extensive
help from Sebastian Leonhardt testing it on slower hardware (YH820),
where it works up to 650 actual bpm with display indication.
Latest change: Documentation nitpicks.
Change-Id: I764c8252526db188352385c5462f9453d882beb9
- original rockbox port: Yifu Huang
- original work: Jonathan Bettencourt
- modifications made:
- PLA-fied
- Add element 117 (ununseptium)
- Implemented up/down
- Fixed actinide/lanthanide navigation so that they are between scandium and titanium
- Added manual entry
- Fixed FG/BG colors
Change-Id: Ibabfb0d28f794689ffcd8b9c360fb969d118de08
Reviewed-on: http://gerrit.rockbox.org/950
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
With LCD driver all calculation will be performed on RGB888 and the hardware/OS
can display from our 24bit framebuffer.
It is not yet as performance optimized as the existing drivers but should be
good enough.The vast number of small changes is due to the fact that
fb_data can be a struct type now, while most of the code expected a scalar type.
lcd-as-memframe ASM code does not work with 24bit currently so the with 24bit
it enforces the generic C code.
All plugins are ported over. Except for rockpaint. It uses so much memory that
it wouldnt fit into the 512k plugin buffer anymore (patches welcome).
Change-Id: Ibb1964545028ce0d8ff9833ccc3ab66be3ee0754
Plugins/Applications/main_menu_config allows you to edit the
main menu order without having to manually edit config.cfg.
Press the standard OK button to access the internal menu
which allows you to move items up/down in the order and toggle
their visibility. Exit via this menu to have the order saved.
(Suggestions welcome to improve this UI)
Change-Id: I59715ef1ca265aeb6f9666ef27026bc1093f2579
Replaces the NATIVE_FREQUENCY constant with a configurable frequency.
The user may select 48000Hz if the hardware supports it. The default is
still 44100Hz and the minimum is 44100Hz. The setting is located in the
playback settings, under "Frequency".
"Frequency" was duplicated in english.lang for now to avoid having to
fix every .lang file for the moment and throwing everything out of sync
because of the new play_frequency feature in features.txt. The next
cleanup should combine it with the one included for recording and
generalize the ID label.
If the hardware doesn't support 48000Hz, no setting will be available.
On particular hardware where very high rates are practical and desireable,
the upper bound can be extended by patching.
The PCM mixer can be configured to play at the full hardware frequency
range. The DSP core can configure to the hardware minimum up to the
maximum playback setting (some buffers must be reserved according to
the maximum rate).
If only 44100Hz is supported or possible on a given target for playback,
using the DSP and mixer at other samperates is possible if the hardware
offers them.
Change-Id: I6023cf0c0baa8bc6292b6919b4dd3618a6a25622
Reviewed-on: http://gerrit.rockbox.org/479
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
Creates a standard buffer passing, local data passing and messaging
system for processing stages. Stages can be moved to their own source
files to reduce clutter and ease assimilation of new ones. dsp.c
becomes dsp_core.c which supports an engine and framework for effects.
Formats and change notifications are passed along with the buffer so
that they arrive at the correct time at each stage in the chain
regardless of the internal delays of a particular one.
Removes restrictions on the number of samples that can be processed at
a time and it pays attention to destination buffer size restrictions
without having to limit input count, which also allows pcmbuf to
remain fuller and safely set its own buffer limits as it sees fit.
There is no longer a need to query input/output counts given a certain
number of input samples; just give it the sizes of the source and
destination buffers.
Works in harmony with stages that are not deterministic in terms of
sample input/output ratio (like both resamplers but most notably
the timestretch). As a result it fixes quirks with timestretch hanging
up with certain settings and it now operates properly throughout its
full settings range.
Change-Id: Ib206ec78f6f6c79259c5af9009fe021d68be9734
Reviewed-on: http://gerrit.rockbox.org/200
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
