This clearly fixes recording on targets where the bias pin was wrong. It may
also improve recording on targets where the bias voltage was wrong. I was unable
to find those parameters on the ZEN Mozaic, which fallback to default values.
Change-Id: Ifb5f823c9cbd01f0d9a80fa5d49d93972c8b7cfe
For some reason, there was a mismatch between the setting (decibel) and the
audiohw code (centicel). This resulted in a gain divided by 10. This may
explain why some people experienced low volume with the mic on the fuze+.
Change-Id: I138ac18dd93c36f43a7dfce735efc826405c598c
The codec wasn't calling ci->set_offset() while decoding; as a result,
the saved offset in ci.id3->offset was only updated at the start of the
file and when seeking.
To reproduce the problem in the simulator or on a real device:
- Start playing an Opus file.
- Let it play until 15s, then turn the player off.
- Turn back on and resume playback. This'll resume correctly from 15s
(using time-based resume, I think, as the offset was 0?).
- Let it play until 30s, then turn the player off again.
- Turn back on and resume playback. This'll resume from 15s, based on
the initial position from last time, when it should resume from 30s.
I believe this will also fix FS#12799 ("Resuming opus file from bookmark
is not working correctly").
Change-Id: Iba67368e0029c968ef802693767e0722719bc38b
There was a lot of copy and paste, and the code was just crap. This commit tries
to clarify the code and also document the encryption procedure. Hopefully I didn't
break anything.
Change-Id: I257793010e7cf94f2b090b30bb8608359d3886e3
Also clarity parts of the code. The old code suffered from two defects:
- it was very unclear because it made changes to whole registers
(using as3514_write) instead of fields (using as3514_set/clear/write_masked).
Also the routing code was spread accross several functions which made it hard to
follow.
- it did not properly reroute audio on monitor changes. In particular, the following
could happen: when switching from DAC to radio, the code would fail to clear
SUM_off, resulting in a weird situation where the main mixer was off
(SUM_off) but the headphone where using the main mixer as input. Incredibly this
worked anyway (at least on AMSv2 and YP-R0) but resulted in strange volume gaps
between DAC and radio mode.
Change-Id: I7826835fdb59c21f6483b223883ca9289e85caca
Based on emCORE.
Low level functions that do not depend on Rockbox kernel,
intended to be used by the bootloader, dualboot-installer,
RB drivers or other .dfu tools.
Change-Id: I3c616ded42260c6626bda23b7e580791981df61d
Based on emCORE.
Low level functions that do not depend on Rockbox kernel,
intended to be used by the bootloader, dualboot-installer,
RB drivers or other .dfu tools.
Change-Id: Iad369627b55bf1778eab437424072f1a653e4db6
During the bootloader install/uninstall process, a signal
is emitted when "Abort" button is pressed, the installers
can attach this signal and cancel the process.
Change-Id: I7f297b8031d7a2d93da0022081aaef03ef041baf
Useful for targets that needs multi-stage uninstall. On current
targets (with Uninstall capability) the progress is updated to
100% when bootloader uninstall is successfully finished.
Change-Id: I61be1c4f5cfc2d2f35fa5005962be9703888447d
This allows to implement multi-stage uninstallers. Should not affect
the behaviour on current targets.
Change-Id: Idf8aec5caf76cf9317798890d094a7cebdbcabec
Newer toolchains (both gcc and libc related) add a lot of warnings.
While these can be useful and correct, cleaning them up woult be a
lot of work and isn't likely to actually happen any time soon.
Change-Id: I8c4e8cd3dc92f9afa4bf003c63ca65e895e3ef00
- Some rewrite with the intent to get ride of these random errors
appearing on some builds/devices (not much noticeable on RB but
can ruin bootloader builds).
- Error handling (ACK).
- IIC clock increased to be the same as in OF.
Change-Id: Idf8cfa3c230a0a61ec9c879bf6f0ea8b061a4607
Add code to read USB D+/D- and accessory ADCs, it is shown in HW
debug menu, might be useful in future for RB and/or the bootloader
to identify external USB chargers.
Change-Id: Ia48ca5e06bb7ddc52bb55abedde6734653ce8dba
Based on g#844 and g#949, it is intended as a replacement for the
current s3c6400x USB driver.
The DesignWare USB OTG core is integrated into many SoC's, however
HW core version and capabilities (mainly DMA mode, Tx FIFO mode,
FIFO size and number of available IN/OUT endpoins) may differ:
CPU targets HW ver DMA NPTX FIFO FIFO sz #IN/OUT
-------- ------------- ------ --- --------- ------- -------
as3525v2 sansaclipplus 2.60a Yes Dedicated 0x535 4/4
sansaclipv2
sansaclipzip
sansafuzev2
s5l8701 ipodnano2g 2.20a Yes Shared 0x500 4/5
s5l8702 ipod6g 2.60a Yes Dedicated 0x820 7/7
ipodnano3g
s5l8720 ipodnano4g ? ? ? ? ?
Functionality supported by this driver:
- Device mode, compatible with USB 1.1/2.0 hosts.
- Shared FIFO (USB_DW_SHARED_FIFO) or dedicated FIFOs.
- No DMA (USB_DW_ARCH_SLAVE) or internal DMA mode.
- Concurrent transfers: control, bulk (usb_storage, usb_serial) and
interrupt (usb_hid).
Actually this driver is not used by any CPU, it will be enabled for
each individual CPU/target in next patches.
Change-Id: I74a1e836d18927a31f6977d71115fb442477dd5f
Apparently I simply forgot to calibrate it when the port was done and the
current values are just plain wrong, especially for the charging curve.
Change-Id: Ied3cafa52f31f182f953714e28edc4c5e891255f
