Some USB controllers like the one of the Rockchip 27xx handle some
requests in pure hardware. This is especially a problem for two
of them:
- SET ADDR which is used by our core to track the DEFAULT/ADDRESS
state and is required for the drivers to work properly
- SET CONFIG which is used by our core to initialise the drivers
by calling init_connection()
In these cases we need a way to notify the core that such requests
happened.
We do this by exporting two functions which directly notify the
core about these requests and perform the necessary init steps
required without doing the actual USB transfers. Special care is
needed because these functions could be called from an interrupt
handler. For this reason we still use the usb_queue and introduce
new IDs so that they are processed in order and safely.
No functional change is intended, both in the usbstack and on
targets without such quirks.
Change-Id: Ie42feffd4584e88bf37cff018b627f333dca1140
The new tool fwcrypt can create a firmware image with a specified
model, version, region and so on.
Change-Id: I0e90e9ab905398a3e7ae3f4fb8b8bbfb2d12d703
M200v4 doesn't have enough plugin RAM for waveform view. HD300 I was
clueless about, created a duplicated case. Will just leave for now.
Targets still need GRAPHMODE key defined to access.
Change-Id: Ib21f46f25c1121ebee78bd26c856446ac7720b37
* Adds some additional niftyness like a floating popup display that
is implemented in an OSD library for use by other plugins.
* Speed changes are now gradual for both views and follow a curve
derived from some fiddling around to get a nice feel.
* Refined a few behavioral things overall.
It needs a bit of help from a direct PCM channel callback so it may
capture PCM for waveform display. Also need a few other core routines
to help out for the OSD.
Messes with some keymaps. Some targets need keymaps to access the
different views. Some devices can't support the additional view
because it requires a large buffer ( > 1 s) for samples.
If the plugin buffer is small, they can still use the popup display
since the plugin is also much smaller in that case.
Slow speed waveform needs some refining so it draws gradually like
a real oscilloscope but I'll stick with what it is, for the moment.
Change-Id: Ieb5b7922a2238264e9b19a58cb437739194eb036
Reviewed-on: http://gerrit.rockbox.org/245
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
Add a number of missing collaborators to the /rockbox/wps/AUTHORS file and create
a new header to share between the .fms, .sbs, and .wps files in the /rockbox/wps/
directory. No functional changes made, purely cosmetic.
Change-Id: Id4b22d438e340da4dfc18ec8bf0e40088bdc606e
Reviewed-on: http://gerrit.rockbox.org/368
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Update %?pv description to better describe the
conditions it returns
Change-Id: I6be4d5293aa6816ae35d743b172fe324d7dc6d12
Reviewed-on: http://gerrit.rockbox.org/367
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
This fix the "jarsigner error: java.security.SignatureException: private
key algorithm is not compatible with signature algorithm" when compiling
Android builds using OpenJDK7. This patch explicit how keytools make a
debug key so it is compatible with the changes in jarsigner made on
OpenJDK7. It is still working with OpenJDK6.
For those who already have a debug key, it will be necessary to remove
the previous key located on ~/.android.
Change-Id: Ifa4d37d0bda76e8937dc18572a7e8586c1a18a63
Reviewed-on: http://gerrit.rockbox.org/359
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
Samsung provides many firmware upgrade in the format of a .dat
file, at least for nearly all YP's (checked for Q2, R0, T10, Z5).
This is a simple cyclic xor which a fixed key, a md5 sum and a
header specifying the model/version/region.
Change-Id: Ib0461a74196383189fd2d8162da444a85a229c60
This tool is very preliminary but could be use for whatever
purpose since the format of the rsrc sections is now known.
By the way it appears that this format is the same as the
one use by the stmp36xx for its resources.
Change-Id: Idd7057f5cdce5af9726904169bb100c8bacb0981
Missing screenshots:
Invadrox, which I can't find in the menu, but on IRC they said it's
for LCD only, so it should be removed.
Pacbox, Rockboy and Zxbox: it's unclear where to find the ROMs.
Poor quality image:
manual/rockbox_interface/images/sansaclipzip-front.png. It can work,
but my “artistic” skills are not enough. Anyway, the information on
the picture is correct.
All the screenshots were taken using the default theme and the
simulator compiled for the Sansa Clip Zip.
Change-Id: I779a3b8fbf9a1ab2f12b8f8e6bcf55f2363900ce
Reviewed-on: http://gerrit.rockbox.org/357
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Reviewed-by: Alex Parker <rockbox@aeparker.com>
Tested-by: Alex Parker <rockbox@aeparker.com>
While elf simplification is a powerful tool it can be useful to
prevent it from happening for debug purposes. Also add a missing
switch description in usage() and missing static.
Change-Id: I80a1904dc4340c412bd3de1c124a2e38d6ac11a2
This is less useful is most cases because sb2 doesn't have the
size restritions but some elf are produced with one section per
file and still yield dozens or hundreds of sections. And this free
anyway so we can do it.
Change-Id: Ia5ca83a8375063ecc7052d1ea73b2b21c00be730
Load, fill and call/jump instructions are extracted as elf files
like for sb2. Because of the size limitations of the sb1
instructions, the resulting elf files can easily have hundreds of
sections. The (currently) implemented elf simplification method
will hopefully reduce this to a few sections only
Change-Id: I8fd6ed935ac3128f244bbd71c782e2a0a1c6d44a
Implement actual loading of a sb1 file to a structure in full
generality. Also implement dumping for debug purpose
Change-Id: I320035ea628719480a79aaccb05dce9a83256927
The STMP36xx series also uses .sb files but with a different
format. The main differences are the encryption and the lack of
sections, making it basically a list of commands: fill, load,
call, jump, switch mode, set sdram settings. Currently only the
sbtoelf has support for the sb1 and can only dump the list of
commands. Actual support for elf creation will come later.
Change-Id: I1f2e0230c91ac64efd0e8430e0c5212098c599fd
Ideally someone will go through and make a graphic for the 6G, but as it looks nearly identical to the Video its not a huge deal.
Change-Id: If507c6d4f01eb0b1e5fc2f15f6a0e5a3195006c6
Makes FM radio keys consistent with the updated Clip keymap in the rest of rockbox. Home now goes to the main menu, power stops the radio, and several other keys are a little more obvious.
Change-Id: Iaab207acf936820d5602ae1ce4ffbbe30bf7877e
What it does:
- removes unnecessary file operations for the OF (one lseek() and one read() per one key),
- simplifies the code and reduces the code size.
Speedup is not noticeable but theoretically some is.
Change-Id: I43a6dd21d3af48ea8d3b27d676c84b2084c0b88c
Reviewed-on: http://gerrit.rockbox.org/287
Tested-by: Szymon Dziok <b0hoon@o2.pl>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Szymon Dziok <b0hoon@o2.pl>
I'm not 100% sure that the rounding of denormals is correct. As compared to foobar2000,
some samples are off by +1 LSB. However, since I can't output 24 bit PCM easily with
rockbox, I'm not sure if this is due to a bug or just how rockbox rounds. In practice
I don't think it matters so I'm just going to commit this for now.
Change-Id: Ic0792fcb172e4369a5512d202121c2b918b36079
Like gigabeat s and f, Fuze+ also handles dysplaying all frames
even with sound on.
Change-Id: Ib92062e378869c1687d6a7658ec23be60e168ccf
Reviewed-on: http://gerrit.rockbox.org/186
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
The hwemul tool is a small binary blob running on the device
that can received commands over USB. It is mainly intended to be
loaded using the recory mode and allows to read/write registers,
memory, use the OTP device, ... The tool is split into three
parts: dev/ contains the actual blob (which handles both imx233
and stmp3700), lib/ contains the communication library and can
also use the register description produced by the regtools/
to ease register by name, tools/ contains an interactive tool
to send commands to the device when running the blob.
Change-Id: Ie8cb32e987f825d8ed750d48071e43415b4dacb3
These files were produced by parsing some linux and/or sigmatel
provided headers and later tweaked by hand or by programs.
Each file describes one or more soc. A soc has a list of devices.
Each device can either be unique or have several copies at
different addresses. Each device has a list of registers which
can either be unique or indexed. Each register can further have
a list of fields. Registers with a SCT variant are also handled.
Change-Id: Ib50bb3fda268b6d5713f81bd8961de7978a5815e
These tools allow one to read a register description in a XML
file and to produce something useful out of it. Three example
programs are written:
- tester which simply prints the register tree
- headergen which produces a set of headers with the #define
- hwemulgen which produces something for the hwemul tool (to come)
Change-Id: I52573688b29d5faeaf64ce7c5ffe08ee8db3d33c
This adds ability to view gif images in rockbox.
Works both on color and gray/monochrome targets (greylib).
Aspect correction is supported as well.
Limitations:
- animated gifs are restricted to 32 frames
- animated gifs loop always (loopcount is ignored)
- plain text extension is not supported
- animated gifs with interframe delay = 0 are treated as still
images (web browsers usually treat delay 0 as 100ms to prevent
exhaustive CPU load by such images)
Change-Id: I61501f801ddcd403410e38d83e6bddc9883e7ede
Uninitialized struct scroll which is used to pass state between
scrollstrip ISR and button_read_device() can bomb out whole
button subsytem.
Change-Id: I3b415c22cfee4181b2132cddaeff68797c7cc0ea
sigaltstack() is not available (more accurately, not exposed by the
NDK) pre-gingerbread/2.3. However the android-arm target runs on
down to eclair/2.1, where the asm threads still work fine.
Change-Id: I2bb14bc6bb5653c401552189699a676109ac6587
