Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
22426 commits 17 branches 142 tags 291 MiB
Commit graph

148 commits

Author SHA1 Message Date
Jens Arnold
81b87fe13d Add iAudio M5 FM radio mod to the advanced build options. * Unify iAudio audio driver, fmradio i2c driver, and power driver (M5 + X5 only). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21264 a1c6a512-1295-4272-9138-f99709370657
 2009-06-12 18:53:44 +00:00
Thomas Martitz
6abae1f124 Remove the calls to backlight_lcd_sleep_countdown from target specific code and move it into backlight.c 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20793 a1c6a512-1295-4272-9138-f99709370657
 2009-04-26 01:23:39 +00:00
Thomas Martitz
5c16ba4c4d Fix very last yellows. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20337 a1c6a512-1295-4272-9138-f99709370657
 2009-03-17 04:46:11 +00:00
Thomas Martitz
9771c9c771 One more try: Fix remaining reds and yellows 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20335 a1c6a512-1295-4272-9138-f99709370657
 2009-03-17 04:01:11 +00:00
Thomas Martitz
4ed387d603 Fix reds and yellows (hopefully). Some targets apparently didn't properly #ifdef lcd_enable and lcd_sleep code out, so that it got partly active in the bootloader; rename the ui simulator stub fixes most reds; for the clip: move the hook code into lcd-1bit-vert.c which should fix the bootloader red. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20333 a1c6a512-1295-4272-9138-f99709370657
 2009-03-17 03:36:36 +00:00
Thomas Martitz
b7739fbf1c Rework lcd_enabled and lcd_set/call_enable hook 
a) lcd_enabled() is now lcd_active(), and is available for HAVE_LCD_SLEEP only targets (e.g. ipod video) too. It was depandent on HAVE_LCD_ENALE only before
b) rename the hook accordingly, and implement the hook for other other targets too (e.g. the clip [the only mono target with lcd_enable/lcd_sleep yet, so the code is still in the lcd driver], ipod, fuze, c200)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20331 a1c6a512-1295-4272-9138-f99709370657
 2009-03-17 02:43:47 +00:00
Michael Sevakis
ec67912b63 Reclaim .iram areas in DRAM by overlapping their load addresses with the uninitialized data sections. I did what I could test out-- not any flash image linker scripts or other target processors. Move any .iram copies in crt0.S's to be the first operation even if not _strictly_ necessary to be emphatic (aka. 'beware'). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20061 a1c6a512-1295-4272-9138-f99709370657
 2009-02-20 02:33:40 +00:00
Michael Sevakis
58eb784a5d Straighten out some powermanagement stuff. Give target complete control over how power inputs are sensed. Clean SIMULATOR stuff out of target files. Get rid of USB charging option on targets that don't support it or don't implement it yet. Menu string remains to avoid language incompatibility but should be removed on next cleanup for targets not using it (notice in english.lang). global_settings becomes incompatible for some builds and so plugin API version is incremented. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19315 a1c6a512-1295-4272-9138-f99709370657
 2008-12-03 19:54:25 +00:00
Daniel Stenberg
2acc0ac542 Updated our source code header to explicitly mention that we are GPL v2 or 
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
 2008-06-28 18:10:04 +00:00
Michael Sevakis
adf2e4c9a0 Targets with HAVE_LCD_ENABLE: Provide a means to receive notifications when the lcd is enabled and the image is refreshed so overlayed drawing can also be refreshed. Chiefly mpegplayer needs this so it can redraw the YUV data after the backlight is turned on while paused or when using 'Set Start Time'. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17640 a1c6a512-1295-4272-9138-f99709370657
 2008-05-28 10:17:16 +00:00
Jens Arnold
4a6190dd13 Hopefully fix FS #8840 for iAudio M3, M5 and X5. Reduce greyscale update frequency on M3 in order to reduce CPU load (was >50% before, but this fix would have made it even worse). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17621 a1c6a512-1295-4272-9138-f99709370657
 2008-05-24 08:53:12 +00:00
Michael Sevakis
41b235dacf Fix red. No bother with lcd power management calls in bootloader. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17508 a1c6a512-1295-4272-9138-f99709370657
 2008-05-14 20:26:20 +00:00
Nicolas Pennequin
357ffb3c46 Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17369 a1c6a512-1295-4272-9138-f99709370657
 2008-05-05 10:32:46 +00:00
Bertrik Sikken
19425909c3 Another round of making local functions static and making sure that source files are in sync with their header files. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17337 a1c6a512-1295-4272-9138-f99709370657
 2008-05-03 21:33:00 +00:00
Jens Arnold
2bbacf89fe Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17289 a1c6a512-1295-4272-9138-f99709370657
 2008-04-29 06:19:32 +00:00
Jens Arnold
b1a49f83c6 Save a couple of bytes by using moveq.l where possible. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17007 a1c6a512-1295-4272-9138-f99709370657
 2008-04-07 00:01:03 +00:00
Marcoen Hirschberg
82c52302bd split boot.lds and move it into the target tree 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16855 a1c6a512-1295-4272-9138-f99709370657
 2008-03-27 23:58:03 +00:00
Jens Arnold
06ec18d93f Slightly better instruction order, added comment. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16833 a1c6a512-1295-4272-9138-f99709370657
 2008-03-26 23:45:55 +00:00
Michael Sevakis
af395f4db6 Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16811 a1c6a512-1295-4272-9138-f99709370657
 2008-03-26 01:50:41 +00:00
Jens Arnold
74d678fdbc Back-ported the iAudio remote LCD driver optimisations to X5 and M5. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16810 a1c6a512-1295-4272-9138-f99709370657
 2008-03-26 00:38:40 +00:00
Jens Arnold
40919d7db2 iAudio M3: Optimised LCD driver, with more/better assembly code. Speedup is ~80% when boosted, ~15% when unboosted. Also implemented grey phase blitting. * Adapted the greyscale library, and the plugins using it. * Fixed a bug in greyscale scroll down for vertically packed pixels. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16809 a1c6a512-1295-4272-9138-f99709370657
 2008-03-25 23:21:36 +00:00
Jens Arnold
1f4bcc86da Revert accidental tree commit. /me needs a smaller enter key... 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16805 a1c6a512-1295-4272-9138-f99709370657
 2008-03-25 19:57:23 +00:00
Jens Arnold
9a7978aeab Cabbiev2 gigabeat background: reduce WPS backdrop filesize by storing it as 24 bit BMP instead of unnecessary 32 bit. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16802 a1c6a512-1295-4272-9138-f99709370657
 2008-03-25 19:43:08 +00:00
Jens Arnold
68a21689ae Consistent naming scheme the various blit functions. * Removed lcd_blit_mono() for colour targets. Plugin API became incompatible, so sort, clean up & bump. * Implemented lcd_blit_mono() for M3. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16775 a1c6a512-1295-4272-9138-f99709370657
 2008-03-24 00:35:53 +00:00
Jens Arnold
8e66491ffe M3: Make remote LCD hotplug work, and make 'backlight on button hold' use the correct hold switch. * Kill a warning. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16711 a1c6a512-1295-4272-9138-f99709370657
 2008-03-19 00:34:56 +00:00
Jens Arnold
eb0a7a3318 Correct the name of a flag. No functional change. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16708 a1c6a512-1295-4272-9138-f99709370657
 2008-03-18 22:48:26 +00:00
Jens Arnold
6d8b827472 Commit the ADC changes (fix red M3 builds). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16691 a1c6a512-1295-4272-9138-f99709370657
 2008-03-18 06:55:59 +00:00
Jens Arnold
d700970f86 Cosmetic fixes for the iAudio bootloader: Don't display 'Hold switch on' if the reason for getting there was a spurious ON event. Don't disable the multi-colour LED in the M3 bootloader. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16690 a1c6a512-1295-4272-9138-f99709370657
 2008-03-18 00:17:21 +00:00
Jens Arnold
ed3ff1b0b5 Various coldfire fixes: (1) iAudio Bootloader: Check the status of main & remote power button vs. the respective hold switch, and shut down when on hold. On X5/M5 this check is not strictly necessary for the main unit, but left there to keep things uniform. (2) M3: Stop reading the ADC properly before leaving the bootloader, on RoLo, and on reboot, to make it work reliably after those transitions. (3) Disable all interrupt sources on system init to avoid premature ISR calls after enabling interrupts in general. (4) iAudios: Proper implementation of ide_powered(), avoiding nasty HDD clicks in the bootloader when powering down, e.g. because of Hold. (5) Slight optimisations. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16689 a1c6a512-1295-4272-9138-f99709370657
 2008-03-17 23:47:38 +00:00
Jens Arnold
c6b6bad18f iAudio M3: ADC driver, making buttons and battery voltage reading work. * Disable the multi-colour LED for now to save power. Proper handling will be added later. * Make reboot on button press work on iAudio X5, M5, M3 in panicf(), and on M3 in UIE(). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16684 a1c6a512-1295-4272-9138-f99709370657
 2008-03-17 00:19:23 +00:00
Jens Arnold
30f8326a8c iAudio M3: Fix standard remote context. * Process button adc values in the button driver. Those buttons won't work without the not-yet-committable ADC driver though. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16676 a1c6a512-1295-4272-9138-f99709370657
 2008-03-15 12:20:59 +00:00
Jens Arnold
3894a44202 More iAudio M3 work. Target build compiles, but same problem regarding plugins as the simulator. Boots to the menu, but it can't be used yet because only main & remote Play button work. USB works. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16661 a1c6a512-1295-4272-9138-f99709370657
 2008-03-14 08:59:51 +00:00
Jens Arnold
8a6291dd63 More iAudio M3 work. Target build compiles, but same problem regarding plugins as the simulator. Boots to the menu, but it can't be used yet because only main & remote Play button work. USB works. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16660 a1c6a512-1295-4272-9138-f99709370657
 2008-03-14 08:54:54 +00:00
Jens Arnold
3c561f2cf9 Make the LCD remote work in the Iriver H1x0 and H300 bootloaders as well (untested). * Only try the initial remote LCD init if the remote is plugged, and do it in main builds as well, giving slightly earlier remote LCD output when booting. * Fix delays in the X5/M5 remote LCD init. * Remove an unnecessary check in the X5/M5 remote LCD driver and the M3 LCD driver. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16655 a1c6a512-1295-4272-9138-f99709370657
 2008-03-13 19:36:58 +00:00
Karl Kurbjun
ef62d6891a Split up app.lds to the respective target directories. The portalplayer devices replicate app.lds since their target tree doesn't follow a syntax typical to the newer arm targets - the portalplayers could be cleaned up further. boot.lds and plugin.lds still need to be cleaned up. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16651 a1c6a512-1295-4272-9138-f99709370657
 2008-03-13 03:48:23 +00:00
Jens Arnold
2b5f9aec64 Make ATA work on M3. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16650 a1c6a512-1295-4272-9138-f99709370657
 2008-03-12 23:36:05 +00:00
Jens Arnold
17bc340f1f Make the LCD remote work in the iAudio M3, M5 and X5 bootloaders. * Fix viewport related init bug in the 2 bit vertically interleaved LCD driver. * Fix low bat warning in iaudio bootloader - voltages are in millivolts now. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16648 a1c6a512-1295-4272-9138-f99709370657
 2008-03-12 23:08:33 +00:00
Jens Arnold
769fcbd4d9 More iAudio M3 work. Bootloader compiles, but doesn't work yet. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
 2008-03-12 20:35:42 +00:00
Jens Arnold
837012be86 Fix graphical glitches occuring in the greyscale library on H1x0 and M5 at 124MHz. The main loop within lcd_grey_data() needed instruction reordering (interspersing lcd writes with memory accesses) to meed the LCD controller timing. Slight slowdown because of the extra register needed. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16091 a1c6a512-1295-4272-9138-f99709370657
 2008-01-15 00:51:58 +00:00
Jens Arnold
6a56c14e17 Greyscale library: Changed the internal data format once more (separated pixel values and phases), allowing for further optimisation of drawing, scrolling etc. * Optimised grey phase blitting in the core reduces CPU load on all architectures, most significantly on coldfire. Previous version was too slow to keep up at 45MHz, leading to unwanted graininess (update frequency was halved). Also fixed screendump on 2bpp targets with vertical pixel packing. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16043 a1c6a512-1295-4272-9138-f99709370657
 2008-01-09 23:48:26 +00:00
Jens Arnold
feb5b15e9b All-new greyscale library, replacing the old one. Features: (1) Drawing/updating is faster than the old grayscale lib at full depth. (2) Always 129 shades instead of 2..33 shades. (3) No graininess caused by frequent updates (mpegplayer, doom, ...). (4) Needs less memory than the old grayscale lib at full depth. * The tradeoff is slightly higher CPU load in the ISR (frames are calculated 'live') and an extra function in the core. * Ported all plugins which used the graylib to use the new one. * Some slight optimisations for archos and H1x0 LCD update. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15998 a1c6a512-1295-4272-9138-f99709370657
 2008-01-04 23:42:38 +00:00
Jens Arnold
f4c5c6aa62 Fix bootloaders, and the backlight-modded Ondio build. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15600 a1c6a512-1295-4272-9138-f99709370657
 2007-11-12 19:19:38 +00:00
Jens Arnold
ef12b3b5c6 Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15599 a1c6a512-1295-4272-9138-f99709370657
 2007-11-12 18:49:53 +00:00
Barry Wardell
0d8111cb39 Split radio i2c drivers into target tree where they belong. No changes to binaries produced. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15558 a1c6a512-1295-4272-9138-f99709370657
 2007-11-10 19:14:01 +00:00
Jens Arnold
b85b6be3aa Coldfire targets: enable buffered writes by default. Speeds up all sorts of I/O that writes to ports: LCD update (except the functions using DMA on H300), ATA writes, .... Some timings had to be adjusted for the new configuration. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15129 a1c6a512-1295-4272-9138-f99709370657
 2007-10-15 21:16:50 +00:00
Jens Arnold
99f9550881 H300, X5: Optimised lcd_yuv_blit(), using line-pair zig-zag writing to the LCD controller. ~7% speedup on H300, ~5% speedup on X5. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15111 a1c6a512-1295-4272-9138-f99709370657
 2007-10-14 23:05:56 +00:00
Steve Bavin
c90c18ea67 Thanks to LinusN, fix Coldfire bootloaders not booting - FS#7533 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14949 a1c6a512-1295-4272-9138-f99709370657
 2007-10-02 07:54:50 +00:00
Dave Chapman
1672350378 FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14600 a1c6a512-1295-4272-9138-f99709370657
 2007-09-04 08:03:07 +00:00
Jens Arnold
0fac492c3d First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
 2007-08-17 06:45:18 +00:00
Jens Arnold
8a177345ce Moved archos power handling into target tree. * Tuner power handling cleaned up a bit. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14345 a1c6a512-1295-4272-9138-f99709370657
 2007-08-14 22:06:23 +00:00