A reasonable default assumption for a user
would be that they can plug their device into
a USB AC adapter and it will charge with as much
current as it reasonably can. With the previous
default, an AC adapter will only do 100mA, basically
a trickle charge.
Make this configurable default per-device, so as not
to break old devices without testing.
Define TARGET_USB_CHARGING_DEFAULT to USB_CHARGING_FORCE
to use the new default.
Tested on both erosQ Native and M3K.
Change-Id: I77265d356a41d67357ebc6e9f7e0c25a37b74931
Fixes backlight not turning on after booting (tested on an iPod Mini 2G).
backlight_hw_init() copied from iPod 4G.
Change-Id: I9c32ca5ecd3dc74ea997e6cb843da79d303b0615
Set the maximum volume on both hosted and native ports
to -2 dB.
Verified behavior here on native and by borkitall on irc
for hosted.
Change-Id: I3aebc2bb4b9294a4137a33694c83139c0d76099a
'Bugfix' mono_bitmap_part reads ahead in the buffer,
if the height is <= char bit pixels other memory gets read
found with [Address Sanitizer]
also g#3332 since this is clearly a problem across the code
instead place the check for height < 8 in the lcd_mono_bitmap_part function
second try places the check above the negative y offset
this was causing glitches on the Q1 and likely other TS targets
since a negative y was added to height it made it < CHAR_BIT setting
stride = 0 even though the bitmap was >= CHAR_BIT high
Change-Id: I13bb8ab472c2ae61302a6de5d9e2c78243354460
It's not yet working and because all storage is removable (and the OF
works fine) it's of limited utility aynway.
Change-Id: I8a6a59ac16503d0f4574c3934f473cac54e86858
It has only a couple GB of onboard flash storage with no storage
driver in Rockbox. It hasn't seen any meaningful development since
its initial commit, it's not on the build farm, and the bootloader
build is broken by other refactoring.
Change-Id: Idd9e3c46fac9b96f416ce444182f97a50770e747
I feel this is probably unlikely to be called with a NULL pointer
for cachep but being that we are already doing the check why not
guard file_cache_reset as well
Change-Id: I1a13767ef28a4129ae3513f7aa999fb6c1d6fad8
Similar to the native port, the hosted port benefits from
adding a -1 dc bias to the PCM data. This prevents almost
all clicking artifacts.
Change-Id: Ic6378716774b6d88df23c476e2ef54d49f33dc72
An oversight on my part meant that setting channel balance to
100% L or 100% R would mute both channels - this logic will
prevent that.
Change-Id: I912c2745784fbbbd7a773e1234179801f2ca4680
A small negative offset seems to silence all
play/pause clicking on the PCM5102A.
Also adding PCM soft muting, and muting the headphone amp
when the headphones are detected as removed. This has been
tested to not cause any unintended side effects on the
line out.
Also confirmed the numerical dB values are (approx.) correct.
Change-Id: I689d68887c86add9cc5e0ccb0c7de01aaa69b4d9
This will eventually be used by the ZIP module and other things
that support DEFLATE based streams.
Change-Id: I4acc9561eb56c9c368d1defab9c14e0454d105e1
According to backtrace(3) man page, the string returned from
backtrace_symbols() contains the return address so we shouldn't
need to print it ourselves.
Change-Id: Ia779207285c9ea0052b9aee3d84ee8380bf46d82
Overflow is due to a hidden assumption in create_datetime_filename()
and create_numbered_filename() where buffer must be >= MAX_PATH bytes.
Change-Id: I9d36517d861b6925352380d551afc5439edbb340
* It had a (read) buffer overflow when dumping the stuff on the back half of the buffer
* a highly questionable code construct was nuked
Change-Id: I7f6f119524fc2095f788fc9b3d356459955d3ace
This adds an adapted version of the adler32 algorithm from tinf/zlib
which will be necessary to support ZLIB deflate streams in the future.
Change-Id: Ie60e15acb288acf56a2d44e3d3e912e1b3eb2216
The funny thing is that the memset() for the field in question was
redundant, as the overall inquiry structure was memset(0) already.
Change-Id: I8bec0c93c9317823ff39cf7133535e3bf58fb987
What works:
- LCD: 16-bit RGB565
- all buttons, including scrollwheel
- SD Card
- Battery level and charging/not charging status
- USB
- audio
- sample rate switching
- HP / LO detect, with "safe" fixed LO volume -
LO volume will only be put to user-defined max volume
if headphones are not present.
- rtc
- Plugins build, tried a couple and they seem OK
- Bootloader, installable to nand via usbboot
What doesn't work:
- Dual Boot
- power on/off has intermittent, low volume audio click
(sometimes it's completely silent, sometimes there's
a click)
- Audio uses 16-bit volume scaling, so clicking/popping
is pretty bad at lower volumes - need 32 bit volume
scaling, 24 bit I2S data
- USB HID keys not yet defined
- no jztool support
Unknowns:
- Stereo Switch pins: Direction select, AC_DC
(probably not even hooked up)
- What is the actual purpose of the Stereo Swtich?
- How does the bluetooth module connect?
"Someday" stuff:
- get LCD working at higher bit depth
- Bluetooth
Change-Id: I70dda8fc092c6e3f4352f2245e4164193f803c33
This relies on a macro, CRC32R_FAST, to select which version to
compile with. In tests the fast version is 2x faster at the expense
of requiring 960 more bytes for the lookup table. For now the default
is the space optimized version but in the future I would like to enable
this for ports where we can afford the extra storage and/or memory
requirements.
Change-Id: I25397dadedc3187bb02b2444f8b8ded77c2509b6
I'm not happy with the proliferation of filter-roll-off options
but I don't have a less ugly solution.
Change-Id: I740fca006fa0c3443a467acfea55b6574d48346b
- Audio playback works
- Touchscreen and buttons work
- Bootloader works and is capable of dual boot
- Plugins are working
- Cabbiev2 theme has been ported
- Stable for general usage
Thanks to Marc Aarts for porting Cabbiev2 and plugin bitmaps.
There's a few minor known issues:
- Bootloader must be installed manually using 'usbboot' as there is
no support in jztool yet.
- Keymaps may be lacking, need further testing and feedback.
- Some plugins may not be fully adapted to the screen size and could
benefit from further tweaking.
- LCD shows abnormal effects under some circumstances: for example,
after viewing a mostly black screen an afterimage appears briefly
when going back to a brightly-lit screen. Sudden power-off without
proper shutdown of the backlight causes a "dissolving" effect.
- CW2015 battery reporting driver is buggy, and disabled for now.
Battery reporting is currently voltage-based using the AXP192.
Change-Id: I635e83f02a880192c5a82cb0861ad3a61c137c3a
Debounce logic now handles both removal and insertion and verifies
the detection is stable for 100ms before taking any action.
This solves the bootloader "file not found" issue on the Shanling Q1.
It seems a false removal event was generated, causing the filesystem
to be automatically unmounted. Probably this is due to some transient
noise at boot. Delays didn't solve the problem, probably because the
bogus hotplug event was queued, and normal mdelay() would simply delay
event delivery.
Change-Id: I8b03fb3550309f5a7ab4be0be7465a3dab2d3450
This relies on a macro, CRC32_FAST, to select which version to compile
with. In tests the fast version is 2x faster at the expense of requiring
960 more bytes for the lookup table. For now the default is the speed
optimized version but in the future I would like to enable this for ports
where we can afford the extra storage and/or memory requirements.
Change-Id: I8c7fde6b6ff130f0fdc7c8e472825e25bcdba022
