A specific poweroff function needs to be used for wake-up to work
Disable RTC in bootloaders for consistency with other Sansas
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26243 a1c6a512-1295-4272-9138-f99709370657
Bring Clipv1 & m200v4 plugin buffer down to this limit
zxbox, chessbox and rockboy build on the clip
rockboy doesn't build on m200v4 due to not enough buttons to make a keymap
Some gameboy roms won't run on Clipv1: tetris does but not pokemon for example
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26144 a1c6a512-1295-4272-9138-f99709370657
build it on fuzev2 and clipv2 too, it should be the same controller
as3525v1 file is only build for CONFIG_USBOTG == USBOTG_AS3525, no need
to check for it in the .c file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26142 a1c6a512-1295-4272-9138-f99709370657
- only enable overlays for targets with very small plugin buffer (<=
0x10000 bytes, i.e. archos)
- change the condition for rockboy to reflect exactly why it can be
built or not
- Some plugins need a large plugin buffer, only enable them if the
buffer is big enough (sizes measured on Clipv1)
- disable MIDI if we have 2MB (or less), we won't be able to load the
instruments in the audio buffer
- remove unusable lua overlay loader
- sokoban code is bigger on clipv1 than on SH, assume it code is 20kB on
anything but SH so it builds with buffer smaller than 192kB
- reduce the Clipv1 plugin buffer size from 288kB to 96kb, disabling
zxbox, chessbox, and fft
zxbox and chessbox have overlays which run on archos, we just need to
enable them on other targets. We'll also be able to run rockboy.
fft won't run as it needs a large plugin buffer for greylib
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26141 a1c6a512-1295-4272-9138-f99709370657
To be sure that there is no mistake in this code, it is run *after*
the known to work HOME & LEFT buttons checks, unlike other Sansas
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26122 a1c6a512-1295-4272-9138-f99709370657
- Enable end of charge monitoring once, it doesn't need to be disabled
- Acknowledge the first (wrong) end of charge interrupt on charger enable
(this had been broken in r25299)
- Centralize reads to ENRD* registers and cache the results when needed
- on PP it is not needed because reads are atomic, we only check for
end of charge when the charging, and for charger presence when
discharging
as3525v2 (using as3543) specifics
- I got the datasheet today from AMS, thanks to them for being so fast
and not require me to sign tons of papers!
- USB detection now works on as3525v2 using the as3543. Clip+ won't
reboot to OF yet, it needs mkamsboot support first (usbstack disabled)
- Charging should work, the CHARGER register is at a different place, it
is an extended PMU register -> use ascodec_read/write_charger() to
access it
- real interrupts are not used yet for ENRD, we get thousands of
interrupts per second, apparently only limited by the i2c clock.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26116 a1c6a512-1295-4272-9138-f99709370657
- Refactor the program startup. main() is now in main.c like on target, and the implicit application thread will now act as our main thread (previously a separate one was created for this in thread initialization).
This is part of Rockbox as an application and is the first step to make an application port from the uisimulator. In a further step the sim bits from the sdl build will be separated out.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26065 a1c6a512-1295-4272-9138-f99709370657
Use smaller recording buffer and watermarks on these models with 2MB of ram
Rearrange watermark calculation expressions so we can use fractional
numbers of seconds but still with integer results
Only enable spinup time adjustement for ATA targets
Flash targets (sansas and ondiofm) should still work fine, but they were
not tested
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26014 a1c6a512-1295-4272-9138-f99709370657
also remove an obsolete comment and an unrelated option of the config file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26000 a1c6a512-1295-4272-9138-f99709370657
When the rest of the code is confirmed to work properly without CPU
frequency changes, it will be possible to reliabily test set_cpu_frequency()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25924 a1c6a512-1295-4272-9138-f99709370657
This is to a) to cleanup firmware/common and firmware/include a bit, but also b) for Rockbox as an application which should use the host system's c library and headers, separating makes it easy to exclude our files from the build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25850 a1c6a512-1295-4272-9138-f99709370657
The cost of LBA48 support is very small and it means that upgraded drives/CF cards which are over 128GiB will just work with no custom build required. There should be no runtime effect on disks which do not require it.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25553 a1c6a512-1295-4272-9138-f99709370657
Move scrollwheel parsing function into separate file as it's reused.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25425 a1c6a512-1295-4272-9138-f99709370657
Instead of modifying CGU_PROC to get 24MHz pclk, just switch to fastbus else Clip+ wouldn't boot
Tested on fuzev1/Clip+
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25413 a1c6a512-1295-4272-9138-f99709370657
