Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Reverting parts of r19760 that was mistakenly committed.

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19761 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Björn Stenberg 2009-01-13 14:56:20 +00:00
parent 7bc29086ec
commit 30414d56c9
3 changed files with 88 additions and 91 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
apps/plugins/SOURCES
View file

@ -151,4 +151,3 @@ superdom.c
#endif /* m:robe 500 */
md5sum.c
test_boost.c

96
firmware/target/coldfire/iriver/system-iriver.c
View file

@ -50,15 +50,22 @@
*/
#if MEM < 32
#define MAX_REFRESH_TIMER 54
#define NORMAL_REFRESH_TIMER 10
#define MAX_REFRESH_TIMER 59
#define NORMAL_REFRESH_TIMER 21
#define DEFAULT_REFRESH_TIMER 4
#else
#define MAX_REFRESH_TIMER 26
#define NORMAL_REFRESH_TIMER 4
#define MAX_REFRESH_TIMER 29
#define NORMAL_REFRESH_TIMER 10
#define DEFAULT_REFRESH_TIMER 1
#endif
#ifdef IRIVER_H300_SERIES
#define RECALC_DELAYS(f) \
pcf50606_i2c_recalc_delay(f)
#else
#define RECALC_DELAYS(f)
#endif
#ifdef HAVE_SERIAL
#define BAUD_RATE 57600
#define BAUDRATE_DIV_DEFAULT (CPUFREQ_DEFAULT/(BAUD_RATE*32*2))
@ -66,21 +73,6 @@
#define BAUDRATE_DIV_MAX (CPUFREQ_MAX/(BAUD_RATE*32*2))
#endif
static bool pll_initialized = false;
static void init_pll(void)
{
/* Refresh timer for bypass frequency */
PLLCR &= ~1; /* Bypass mode */
PLLCR = 0x0189e025 | (PLLCR & 0x70400000); /* set 112 MHz */
/* Wait until the PLL has locked. This may take up to 10ms! */
while(!(PLLCR & 0x80000000)) {};
pll_initialized = true;
}
#ifdef HAVE_ADJUSTABLE_CPU_FREQ
void set_cpu_frequency (long) __attribute__ ((section (".icode")));
void set_cpu_frequency(long frequency)
@ -89,59 +81,67 @@ void cf_set_cpu_frequency (long) __attribute__ ((section (".icode")));
void cf_set_cpu_frequency(long frequency)
#endif
{
if (!pll_initialized)
init_pll();
switch(frequency)
{
case CPUFREQ_MAX:
DCR = (0x8200 | DEFAULT_REFRESH_TIMER);
/* Refresh timer for bypass frequency */
PLLCR &= ~1; /* Bypass mode */
timers_adjust_prescale(CPUFREQ_DEFAULT_MULT, false);
RECALC_DELAYS(CPUFREQ_MAX);
PLLCR = 0x018ae025 | (PLLCR & 0x70400000);
CSCR0 = 0x00001180; /* Flash: 4 wait states */
CSCR1 = 0x00001580; /* LCD: 5 wait states */
#if CONFIG_USBOTG == USBOTG_ISP1362
CSCR3 = 0x00002180; /* USBOTG: 8 wait states */
#endif
#if CONFIG_RTC == RTC_PCF50606
pcf50606_i2c_recalc_delay(CPUFREQ_MAX);
#endif
while(!(PLLCR & 0x80000000)) {}; /* Wait until the PLL has locked.
This may take up to 10ms! */
timers_adjust_prescale(CPUFREQ_MAX_MULT, true);
DCR = (0x8200 | MAX_REFRESH_TIMER); /* Refresh timer */
cpu_frequency = CPUFREQ_MAX;
IDECONFIG1 = 0x10100000 | (1 << 13) | (3 << 10);
/* SRE active on write (H300 USBOTG) | BUFEN2 enable | CS2Post | CS2Pre */
IDECONFIG2 = 0x40000 | (1 << 8); /* TA enable 2 + CS2wait */
IDECONFIG2 = 0x40000 | (1 << 8); /* TA enable + CS2wait */
PLLCR = (PLLCR & ~0x07000000) | (1 << 24); /* set CPUDIV */
DCR = (0x8200 | MAX_REFRESH_TIMER); /* DRAM refresh timer */
cpu_frequency = CPUFREQ_MAX;
#ifdef HAVE_SERIAL
UBG10 = BAUDRATE_DIV_MAX >> 8;
UBG20 = BAUDRATE_DIV_MAX & 0xff;
#endif
break;
case CPUFREQ_NORMAL:
PLLCR = (PLLCR & ~0x07000000) | (5 << 24); /* set CPUDIV */
DCR = (0x8000 | NORMAL_REFRESH_TIMER); /* DRAM refresh timer */
cpu_frequency = CPUFREQ_MAX;
DCR = (DCR & ~0x01ff) | DEFAULT_REFRESH_TIMER;
/* Refresh timer for bypass frequency */
PLLCR &= ~1; /* Bypass mode */
timers_adjust_prescale(CPUFREQ_DEFAULT_MULT, false);
RECALC_DELAYS(CPUFREQ_NORMAL);
PLLCR = 0x0589e021 | (PLLCR & 0x70400000);
CSCR0 = 0x00000580; /* Flash: 1 wait state */
CSCR1 = 0x00000180; /* LCD: 0 wait states */
#if CONFIG_USBOTG == USBOTG_ISP1362
CSCR3 = 0x00000580; /* USBOTG: 1 wait state */
#endif
#if CONFIG_RTC == RTC_PCF50606
pcf50606_i2c_recalc_delay(CPUFREQ_NORMAL);
#endif
while(!(PLLCR & 0x80000000)) {}; /* Wait until the PLL has locked.
This may take up to 10ms! */
timers_adjust_prescale(CPUFREQ_NORMAL_MULT, true);
DCR = (0x8000 | NORMAL_REFRESH_TIMER); /* Refresh timer */
cpu_frequency = CPUFREQ_NORMAL;
IDECONFIG1 = 0x10100000 | (1 << 13) | (1 << 10);
/* SRE active on write (H300 USBOTG) | BUFEN2 enable | CS2Post | CS2Pre */
IDECONFIG2 = 0x40000; /* TA enable 2 */
break;
IDECONFIG2 = 0x40000 | (0 << 8); /* TA enable + CS2wait */
#ifdef HAVE_SERIAL
UBG10 = BAUDRATE_DIV_NORMAL >> 8;
UBG20 = BAUDRATE_DIV_NORMAL & 0xff;
#endif
break;
default:
DCR = (DCR & ~0x01ff) | DEFAULT_REFRESH_TIMER;
/* Refresh timer for bypass frequency */
PLLCR &= ~1; /* Bypass mode */
timers_adjust_prescale(CPUFREQ_DEFAULT_MULT, true);
#if CONFIG_RTC == RTC_PCF50606
pcf50606_i2c_recalc_delay(CPUFREQ_DEFAULT_MULT);
#endif
RECALC_DELAYS(CPUFREQ_DEFAULT);
/* Power down PLL, but keep CRSEL and CLSEL */
PLLCR = 0x00800200 | (PLLCR & 0x70400000);
CSCR0 = 0x00000180; /* Flash: 0 wait states */
@ -153,14 +153,12 @@ void cf_set_cpu_frequency(long frequency)
cpu_frequency = CPUFREQ_DEFAULT;
IDECONFIG1 = 0x10100000 | (1 << 13) | (1 << 10);
/* SRE active on write (H300 USBOTG) | BUFEN2 enable | CS2Post | CS2Pre */
IDECONFIG2 = 0x40000; /* TA enable 2 */
pll_initialized = false;
break;
}
IDECONFIG2 = 0x40000 | (0 << 8); /* TA enable + CS2wait */
#ifdef HAVE_SERIAL
UBG10 = BAUDRATE_DIV_NORMAL >> 8;
UBG20 = BAUDRATE_DIV_NORMAL & 0xff;
UBG10 = BAUDRATE_DIV_DEFAULT >> 8;
UBG20 = BAUDRATE_DIV_DEFAULT & 0xff;
#endif
break;
}
}

8
firmware/target/coldfire/system-target.h
View file

@ -215,11 +215,11 @@ extern void cf_set_cpu_frequency(long frequency);
/* 11.2896 MHz */
#define CPUFREQ_DEFAULT_MULT 1
#define CPUFREQ_DEFAULT (CPUFREQ_DEFAULT_MULT * CPU_FREQ)
/* 22.5792 MHz */
#define CPUFREQ_NORMAL_MULT 2
/* 45.1584 MHz */
#define CPUFREQ_NORMAL_MULT 4
#define CPUFREQ_NORMAL (CPUFREQ_NORMAL_MULT * CPU_FREQ)
/* 112.896 MHz */
#define CPUFREQ_MAX_MULT 10
/* 124.1856 MHz */
#define CPUFREQ_MAX_MULT 11
#define CPUFREQ_MAX (CPUFREQ_MAX_MULT * CPU_FREQ)
#endif /* SYSTEM_TARGET_H */