376 lines
9.9 KiB
C
376 lines
9.9 KiB
C
|
/***************************************************************************
|
||
|
|
* __________ __ ___.
|
||
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||
|
|
* \/ \/ \/ \/ \/
|
||
|
|
* $Id$
|
||
|
|
*
|
||
|
|
* Copyright (C) 2007 by Mark Arigo
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or
|
||
|
|
* modify it under the terms of the GNU General Public License
|
||
|
|
* as published by the Free Software Foundation; either version 2
|
||
|
|
* of the License, or (at your option) any later version.
|
||
|
|
*
|
||
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||
|
|
* KIND, either express or implied.
|
||
|
|
*
|
||
|
|
****************************************************************************/
|
||
|
|
#include "config.h"
|
||
|
|
#include "cpu.h"
|
||
|
|
#include "lcd.h"
|
||
|
|
#include "kernel.h"
|
||
|
|
#include "system.h"
|
||
|
|
|
||
|
|
/* Display status */
|
||
|
|
static unsigned lcd_yuv_options SHAREDBSS_ATTR = 0;
|
||
|
|
|
||
|
|
#if defined(HAVE_LCD_ENABLE) || defined(HAVE_LCD_SLEEP)
|
||
|
|
static bool is_lcd_enabled = true;
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* NOTE: the LCD is rotated 90 degrees */
|
||
|
|
|
||
|
|
/* LCD command set for Samsung S6B33B2 */
|
||
|
|
|
||
|
|
#define R_NOP 0x00
|
||
|
|
#define R_OSCILLATION_MODE 0x02
|
||
|
|
#define R_DRIVER_OUTPUT_MODE 0x10
|
||
|
|
#define R_DCDC_SET 0x20
|
||
|
|
#define R_BIAS_SET 0x22
|
||
|
|
#define R_DCDC_CLOCK_DIV 0x24
|
||
|
|
#define R_DCDC_AMP_ONOFF 0x26
|
||
|
|
#define R_TEMP_COMPENSATION 0x28
|
||
|
|
#define R_CONTRAST_CONTROL1 0x2a
|
||
|
|
#define R_CONTRAST_CONTROL2 0x2b
|
||
|
|
#define R_STANDBY_OFF 0x2c
|
||
|
|
#define R_STANDBY_ON 0x2d
|
||
|
|
#define R_DDRAM_BURST_OFF 0x2e
|
||
|
|
#define R_DDRAM_BURST_ON 0x2f
|
||
|
|
#define R_ADDRESSING_MODE 0x30
|
||
|
|
#define R_ROW_VECTOR_MODE 0x32
|
||
|
|
#define R_N_LINE_INVERSION 0x34
|
||
|
|
#define R_FRAME_FREQ_CONTROL 0x36
|
||
|
|
#define R_RED_PALETTE 0x38
|
||
|
|
#define R_GREEN_PALETTE 0x3a
|
||
|
|
#define R_BLUE_PALETTE 0x3c
|
||
|
|
#define R_ENTRY_MODE 0x40
|
||
|
|
#define R_X_ADDR_AREA 0x42
|
||
|
|
#define R_Y_ADDR_AREA 0x43
|
||
|
|
#define R_RAM_SKIP_AREA 0x45
|
||
|
|
#define R_DISPLAY_OFF 0x50
|
||
|
|
#define R_DISPLAY_ON 0x51
|
||
|
|
#define R_SPEC_DISPLAY_PATTERN 0x53
|
||
|
|
#define R_PARTIAL_DISPLAY_MODE 0x55
|
||
|
|
#define R_PARTIAL_START_LINE 0x56
|
||
|
|
#define R_PARTIAL_END_LINE 0x57
|
||
|
|
#define R_AREA_SCROLL_MODE 0x59
|
||
|
|
#define R_SCROLL_START_LINE 0x5a
|
||
|
|
#define R_DATA_FORMAT_SELECT 0x60
|
||
|
|
|
||
|
|
|
||
|
|
/* wait for LCD */
|
||
|
|
static inline void lcd_wait_write(void)
|
||
|
|
{
|
||
|
|
while (LCD1_CONTROL & LCD1_BUSY_MASK);
|
||
|
|
}
|
||
|
|
|
||
|
|
/* send LCD data */
|
||
|
|
static void lcd_send_data(unsigned data)
|
||
|
|
{
|
||
|
|
lcd_wait_write();
|
||
|
|
LCD1_DATA = data >> 8;
|
||
|
|
lcd_wait_write();
|
||
|
|
LCD1_DATA = data & 0xff;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* send LCD command */
|
||
|
|
static void lcd_send_command(unsigned cmd)
|
||
|
|
{
|
||
|
|
lcd_wait_write();
|
||
|
|
LCD1_CMD = cmd;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* LCD init */
|
||
|
|
void lcd_init_device(void)
|
||
|
|
{
|
||
|
|
#if 0
|
||
|
|
/* This is the init sequence from the yh820 OF bootloader */
|
||
|
|
unsigned long tmp;
|
||
|
|
|
||
|
|
DEV_INIT1 &= ~0x3000;
|
||
|
|
tmp = DEV_INIT1;
|
||
|
|
DEV_INIT1 = tmp;
|
||
|
|
DEV_INIT2 &= ~0x400;
|
||
|
|
|
||
|
|
LCD1_CONTROL &= ~0x4;
|
||
|
|
udelay(15);
|
||
|
|
LCD1_CONTROL |= 0x4;
|
||
|
|
|
||
|
|
LCD1_CONTROL = 0x680;
|
||
|
|
LCD1_CONTROL = 0x684;
|
||
|
|
|
||
|
|
LCD1_CONTROL |= 0x1;
|
||
|
|
udelay(200);
|
||
|
|
|
||
|
|
lcd_send_command(R_STANDBY_OFF);
|
||
|
|
udelay(100000);
|
||
|
|
|
||
|
|
lcd_send_command(R_DISPLAY_OFF);
|
||
|
|
udelay(10000);
|
||
|
|
|
||
|
|
lcd_send_command(R_OSCILLATION_MODE);
|
||
|
|
lcd_send_command(0x01);
|
||
|
|
udelay(30000);
|
||
|
|
|
||
|
|
lcd_send_command(R_DCDC_SET);
|
||
|
|
lcd_send_command(0x01);
|
||
|
|
udelay(30000);
|
||
|
|
|
||
|
|
lcd_send_command(R_DCDC_AMP_ONOFF);
|
||
|
|
lcd_send_command(0x01);
|
||
|
|
udelay(30000);
|
||
|
|
|
||
|
|
lcd_send_command(R_DCDC_AMP_ONOFF);
|
||
|
|
lcd_send_command(0x09);
|
||
|
|
udelay(30000);
|
||
|
|
|
||
|
|
lcd_send_command(R_DCDC_AMP_ONOFF);
|
||
|
|
lcd_send_command(0x0b);
|
||
|
|
udelay(30000);
|
||
|
|
|
||
|
|
lcd_send_command(R_DCDC_AMP_ONOFF);
|
||
|
|
lcd_send_command(0x0f);
|
||
|
|
udelay(30000);
|
||
|
|
|
||
|
|
lcd_send_command(R_DCDC_CLOCK_DIV);
|
||
|
|
lcd_send_command(0x03);
|
||
|
|
udelay(10000);
|
||
|
|
|
||
|
|
lcd_send_command(R_CONTRAST_CONTROL1);
|
||
|
|
lcd_send_command(0x89);
|
||
|
|
udelay(10000);
|
||
|
|
|
||
|
|
lcd_send_command(R_TEMP_COMPENSATION);
|
||
|
|
lcd_send_command(0x01);
|
||
|
|
udelay(10000);
|
||
|
|
|
||
|
|
lcd_send_command(R_ADDRESSING_MODE);
|
||
|
|
lcd_send_command(0x19);
|
||
|
|
udelay(10000);
|
||
|
|
|
||
|
|
lcd_send_command(R_ROW_VECTOR_MODE);
|
||
|
|
lcd_send_command(0x00);
|
||
|
|
udelay(10000);
|
||
|
|
|
||
|
|
lcd_send_command(R_N_LINE_INVERSION);
|
||
|
|
lcd_send_command(0x8b);
|
||
|
|
udelay(10000);
|
||
|
|
|
||
|
|
lcd_send_command(R_ENTRY_MODE);
|
||
|
|
lcd_send_command(0x01);
|
||
|
|
|
||
|
|
lcd_send_command(R_DRIVER_OUTPUT_MODE);
|
||
|
|
lcd_send_command(0x34);
|
||
|
|
udelay(10000);
|
||
|
|
|
||
|
|
lcd_send_command(R_X_ADDR_AREA); /* vertical dimensions */
|
||
|
|
lcd_send_command(0x00); /* y1 */
|
||
|
|
lcd_send_command(LCD_HEIGHT - 1); /* y2 */
|
||
|
|
|
||
|
|
lcd_send_command(R_Y_ADDR_AREA); /* horizontal dimensions */
|
||
|
|
lcd_send_command(0x04); /* x1 + 4 */
|
||
|
|
lcd_send_command(LCD_WIDTH - 1 + 4); /* x2 + 4 */
|
||
|
|
udelay(100);
|
||
|
|
|
||
|
|
lcd_send_command(R_BIAS_SET);
|
||
|
|
lcd_send_command(0x01);
|
||
|
|
|
||
|
|
lcd_send_command(R_DDRAM_BURST_OFF);
|
||
|
|
udelay(100);
|
||
|
|
|
||
|
|
lcd_send_command(R_DISPLAY_ON);
|
||
|
|
udelay(30000);
|
||
|
|
#endif
|
||
|
|
}
|
||
|
|
|
||
|
|
/*** hardware configuration ***/
|
||
|
|
int lcd_default_contrast(void)
|
||
|
|
{
|
||
|
|
return DEFAULT_CONTRAST_SETTING;
|
||
|
|
}
|
||
|
|
|
||
|
|
void lcd_set_contrast(int val)
|
||
|
|
{
|
||
|
|
lcd_send_command(R_CONTRAST_CONTROL1);
|
||
|
|
lcd_send_command(val);
|
||
|
|
}
|
||
|
|
|
||
|
|
void lcd_set_invert_display(bool yesno)
|
||
|
|
{
|
||
|
|
/* TODO: Implement lcd_set_invert_display() */
|
||
|
|
(void)yesno;
|
||
|
|
}
|
||
|
|
|
||
|
|
#if defined(HAVE_LCD_ENABLE)
|
||
|
|
void lcd_enable(bool yesno)
|
||
|
|
{
|
||
|
|
if (yesno == is_lcd_enabled)
|
||
|
|
return;
|
||
|
|
|
||
|
|
if ((is_lcd_enabled = yesno))
|
||
|
|
{
|
||
|
|
lcd_send_command(R_STANDBY_OFF);
|
||
|
|
lcd_send_command(R_DISPLAY_ON);
|
||
|
|
lcd_activation_call_hook();
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
lcd_send_command(R_STANDBY_ON);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined(HAVE_LCD_ENABLE) || defined(HAVE_LCD_SLEEP)
|
||
|
|
bool lcd_active(void)
|
||
|
|
{
|
||
|
|
return is_lcd_enabled;
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef HAVE_LCD_FLIP
|
||
|
|
/* turn the display upside down (call lcd_update() afterwards) */
|
||
|
|
/* Note: since the lcd is rotated, this will flip horiz instead of vert */
|
||
|
|
void lcd_set_flip(bool yesno)
|
||
|
|
{
|
||
|
|
lcd_send_command(R_DRIVER_OUTPUT_MODE);
|
||
|
|
lcd_send_command(yesno ? 0x30 : 0x34);
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
|
||
|
|
/*** update functions ***/
|
||
|
|
|
||
|
|
void lcd_yuv_set_options(unsigned options)
|
||
|
|
{
|
||
|
|
lcd_yuv_options = options;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Line write helper function for lcd_yuv_blit. Write two lines of yuv420. */
|
||
|
|
extern void lcd_write_yuv420_lines(unsigned char const * const src[3],
|
||
|
|
int width,
|
||
|
|
int stride);
|
||
|
|
extern void lcd_write_yuv420_lines_odither(unsigned char const * const src[3],
|
||
|
|
int width,
|
||
|
|
int stride,
|
||
|
|
int x_screen, /* To align dither pattern */
|
||
|
|
int y_screen);
|
||
|
|
/* Performance function to blit a YUV bitmap directly to the LCD */
|
||
|
|
void lcd_blit_yuv(unsigned char * const src[3],
|
||
|
|
int src_x, int src_y, int stride,
|
||
|
|
int x, int y, int width, int height)
|
||
|
|
{
|
||
|
|
unsigned char const * yuv_src[3];
|
||
|
|
off_t z;
|
||
|
|
|
||
|
|
/* Sorry, but width and height must be >= 2 or else */
|
||
|
|
width &= ~1;
|
||
|
|
height >>= 1;
|
||
|
|
|
||
|
|
z = stride*src_y;
|
||
|
|
yuv_src[0] = src[0] + z + src_x;
|
||
|
|
yuv_src[1] = src[1] + (z >> 2) + (src_x >> 1);
|
||
|
|
yuv_src[2] = src[2] + (yuv_src[1] - src[1]);
|
||
|
|
|
||
|
|
lcd_send_command(R_ENTRY_MODE);
|
||
|
|
lcd_send_command(0x03);
|
||
|
|
|
||
|
|
lcd_send_command(R_Y_ADDR_AREA);
|
||
|
|
lcd_send_command(x + 4);
|
||
|
|
lcd_send_command(x + width - 1 + 4);
|
||
|
|
|
||
|
|
if (lcd_yuv_options & LCD_YUV_DITHER)
|
||
|
|
{
|
||
|
|
do
|
||
|
|
{
|
||
|
|
lcd_send_command(R_X_ADDR_AREA);
|
||
|
|
lcd_send_command(y);
|
||
|
|
lcd_send_command(y + 1);
|
||
|
|
|
||
|
|
lcd_write_yuv420_lines_odither(yuv_src, width, stride, x, y);
|
||
|
|
yuv_src[0] += stride << 1; /* Skip down two luma lines */
|
||
|
|
yuv_src[1] += stride >> 1; /* Skip down one chroma line */
|
||
|
|
yuv_src[2] += stride >> 1;
|
||
|
|
y += 2;
|
||
|
|
}
|
||
|
|
while (--height > 0);
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
do
|
||
|
|
{
|
||
|
|
lcd_send_command(R_X_ADDR_AREA);
|
||
|
|
lcd_send_command(y);
|
||
|
|
lcd_send_command(y + 1);
|
||
|
|
|
||
|
|
lcd_write_yuv420_lines(yuv_src, width, stride);
|
||
|
|
yuv_src[0] += stride << 1; /* Skip down two luma lines */
|
||
|
|
yuv_src[1] += stride >> 1; /* Skip down one chroma line */
|
||
|
|
yuv_src[2] += stride >> 1;
|
||
|
|
y += 2;
|
||
|
|
}
|
||
|
|
while (--height > 0);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Update the display.
|
||
|
|
This must be called after all other LCD functions that change the display. */
|
||
|
|
void lcd_update(void)
|
||
|
|
{
|
||
|
|
lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Update a fraction of the display. */
|
||
|
|
void lcd_update_rect(int x, int y, int width, int height)
|
||
|
|
{
|
||
|
|
const fb_data *addr;
|
||
|
|
|
||
|
|
if (x + width >= LCD_WIDTH)
|
||
|
|
width = LCD_WIDTH - x;
|
||
|
|
if (y + height >= LCD_HEIGHT)
|
||
|
|
height = LCD_HEIGHT - y;
|
||
|
|
|
||
|
|
if ((width <= 0) || (height <= 0))
|
||
|
|
return; /* Nothing left to do. */
|
||
|
|
|
||
|
|
addr = &lcd_framebuffer[y][x];
|
||
|
|
|
||
|
|
if (width <= 1) {
|
||
|
|
lcd_send_command(R_ENTRY_MODE); /* The X end address must be larger */
|
||
|
|
lcd_send_command(0x03); /* that the X start address, so we */
|
||
|
|
lcd_send_command(R_Y_ADDR_AREA); /* switch to vertical mode for */
|
||
|
|
lcd_send_command(x + 4); /* single column updates and set */
|
||
|
|
lcd_send_command(x + 1 + 4); /* the window width to 2 */
|
||
|
|
} else {
|
||
|
|
lcd_send_command(R_ENTRY_MODE);
|
||
|
|
lcd_send_command(0x01);
|
||
|
|
lcd_send_command(R_Y_ADDR_AREA);
|
||
|
|
lcd_send_command(x + 4);
|
||
|
|
lcd_send_command(x + width - 1 + 4);
|
||
|
|
}
|
||
|
|
|
||
|
|
lcd_send_command(R_X_ADDR_AREA);
|
||
|
|
lcd_send_command(y);
|
||
|
|
lcd_send_command(y + height - 1);
|
||
|
|
|
||
|
|
do {
|
||
|
|
int w = width;
|
||
|
|
do {
|
||
|
|
lcd_send_data(*addr++);
|
||
|
|
} while (--w > 0);
|
||
|
|
addr += LCD_WIDTH - width;
|
||
|
|
} while (--height > 0);
|
||
|
|
}
|