rockbox/firmware/target/arm
Rob Purchase fee24eefa9 D2: Fix the POWER button check after an exception/panic. Make this power the player off, since we don't know how to force a reboot yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22036 a1c6a512-1295-4272-9138-f99709370657
2009-07-25 18:44:57 +00:00
..
archos/av300
as3525 Make sd_present() and mmc_present() look only at the actual presence of a card, not at initialisation state 2009-07-20 13:47:21 +00:00
at91sam Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
imx31 Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
ipod ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time. 2009-07-11 23:43:44 +00:00
iriver ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time. 2009-07-11 23:43:44 +00:00
olympus ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time. 2009-07-11 23:43:44 +00:00
philips Fix Philips sa9200 red (HAVE_LCD_SLEEP is not defined in the bootloader so there's also no lcd_sleep()). 2009-07-16 07:35:10 +00:00
pnx0101 Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
s3c2440 Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
s5l8700 Oops, too many files were committed in r22025, revert this one. The other changes committed as r22025 were initial button and audio drivers for the Nano2G - more work is needed on both, but they work. 2009-07-25 00:54:31 +00:00
samsung Commit part of FS#9873 - Utilise buttons for playlisting 2009-07-22 22:10:25 +00:00
sandisk Add information gleaned from disassembling the main firmware image. Detect lcd type in use. Still no actual output 2009-07-17 20:40:40 +00:00
tatung make ELIO_TPJ1022 bootloader compile again 2009-07-17 22:07:06 +00:00
tcc77x Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
tcc780x D2: Fix the POWER button check after an exception/panic. Make this power the player off, since we don't know how to force a reboot yet. 2009-07-25 18:44:57 +00:00
tms320dm320 Commit FS#9545, storage cleanup and multi-driver support 2009-07-17 22:28:49 +00:00
adc-as3514.c
adc-pp5020.c
ascodec-pp.c
ascodec-target.h
ata-as-arm.S ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time. 2009-07-11 23:43:44 +00:00
ata-nand-telechips.c Commit FS#9545, storage cleanup and multi-driver support 2009-07-17 22:28:49 +00:00
ata-pp5002.c
ata-pp5020.c
ata-sd-pp.c sd_first_drive is only used when HAVE_HOTSWAP is defined, so add appropriate #ifdefs 2009-07-20 19:46:36 +00:00
ata-target.h
audio-pp.c
crt0-pp-bl.S
crt0-pp.S
crt0.S
ffs-arm.S
i2c-pp.c
i2c-telechips.c
i2s-pp.c
kernel-pp.c
lcd-as-memframe.S Apply some ARMv6 optimisations to YUV blitting. Speeds up mpegplayer on Gigabeat S by ~2% in undithered and ~7.5% in dithered mode. 2009-07-15 22:14:21 +00:00
lcd-c200_c200v2.c
lcd-ssd1815.c
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.h ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future. 2009-07-05 01:17:25 +00:00
mmu-arm.S
pcm-pp.c
pcm-telechips.c
powermgmt-ascodec.c
sd-pp-target.h Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD) 2009-07-01 10:07:22 +00:00
system-arm.c Revert r22034 since the backlight handling functions are not consistently named between targets. 2009-07-25 18:42:30 +00:00
system-arm.h
system-pp502x.c Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD) 2009-07-01 10:07:22 +00:00
system-pp5002.c
system-target.h
timer-pp.c Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
usb-drv-arc.c
usb-fw-pp502x.c make ELIO_TPJ1022 bootloader compile again 2009-07-17 22:07:06 +00:00
usb-fw-pp5002.c
usb-target.h
usb-tcc.c
wmcodec-pp.c
wmcodec-telechips.c