rockbox/firmware/target/hosted/ypr0/ascodec-ypr0.c

158 lines
4.3 KiB
C
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id: ascodec-target.h 26116 2010-05-17 20:53:25Z funman $
*
* Module wrapper for AS3543 audio codec, using /dev/afe (afe.ko) of Samsung YP-R0
*
* Copyright (c) 2011 Lorenzo Miori
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "fcntl.h"
#include "unistd.h"
#include "stdio.h"
#include "string.h"
#include "sys/ioctl.h"
#include "stdlib.h"
#include "ascodec-target.h"
int afe_dev = -1;
/* ioctl parameter struct */
struct codec_req_struct {
/* This works for every kind of afe.ko module requests */
unsigned char reg; /* Main register address */
unsigned char subreg; /* Set this only if you are reading/writing a PMU register*/
unsigned char value; /* To be read if reading a register; to be set if writing to a register */
} __attribute__((packed));
/* Write to a normal register */
#define IOCTL_REG_WRITE 0x40034101
/* Write to a PMU register */
#define IOCTL_SUBREG_WRITE 0x40034103
/* Read from a normal register */
#define IOCTL_REG_READ 0x80034102
/* Read from a PMU register */
#define IOCTL_SUBREG_READ 0x80034103
int ascodec_init(void)
{
afe_dev = open("/dev/afe", O_RDWR);
return afe_dev;
}
void ascodec_close(void)
{
if (afe_dev >= 0) {
close(afe_dev);
}
}
/* Read functions returns -1 if fail, otherwise the register's value if success */
/* Write functions return >= 0 if success, otherwise -1 if fail */
int ascodec_write(unsigned int reg, unsigned int value)
{
struct codec_req_struct r = { .reg = reg, .value = value };
return ioctl(afe_dev, IOCTL_REG_WRITE, &r);
}
int ascodec_read(unsigned int reg)
{
struct codec_req_struct r = { .reg = reg };
int retval = ioctl(afe_dev, IOCTL_REG_READ, &r);
if (retval >= 0)
return r.value;
else
return retval;
}
void ascodec_write_pmu(unsigned int index, unsigned int subreg,
unsigned int value)
{
struct codec_req_struct r = {.reg = index, .subreg = subreg, .value = value};
ioctl(afe_dev, IOCTL_SUBREG_WRITE, &r);
}
int ascodec_read_pmu(unsigned int index, unsigned int subreg)
{
struct codec_req_struct r = { .reg = index, .subreg = subreg, };
int retval = ioctl(afe_dev, IOCTL_SUBREG_READ, &r);
if (retval >= 0)
return r.value;
else
return retval;
}
int ascodec_readbytes(unsigned int index, unsigned int len, unsigned char *data)
{
int i, val, ret = 0;
for (i = 0; i < (int)len; i++)
{
val = ascodec_read(i + index);
if (val >= 0) data[i] = val;
else ret = -1;
}
return (ret ?: (int)len);
}
/*
* NOTE:
* After the conversion to interrupts, ascodec_(lock|unlock) are only used by
* adc-as3514.c to protect against other threads corrupting the result by using
* the ADC at the same time. this adc_read() doesn't yield but blocks, so
* lock/unlock is not needed
*
* Additionally, concurrent ascodec_?(read|write) calls are instead protected
* by the R0's Kernel I2C driver for ascodec (mutexed), so it's automatically
* safe
*/
void ascodec_lock(void)
{
}
void ascodec_unlock(void)
{
}
/* Read 10-bit channel data */
unsigned short adc_read(int channel)
{
if ((unsigned)channel >= NUM_ADC_CHANNELS)
return 0;
/* Select channel */
ascodec_write(AS3514_ADC_0, (channel << 4));
unsigned char buf[2];
/* Read data */
if (ascodec_readbytes(AS3514_ADC_0, 2, buf) < 0)
return 0;
/* decode to 10-bit and return */
return (((buf[0] & 0x3) << 8) | buf[1]);
}
void adc_init(void)
{
}