/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id: ascodec-target.h 26116 2010-05-17 20:53:25Z funman $ * * Module wrapper for AS3543 audio codec, using /dev/afe (afe.ko) of Samsung YP-R0 * * Copyright (c) 2011 Lorenzo Miori * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "fcntl.h" #include "unistd.h" #include "stdio.h" #include "string.h" #include "sys/ioctl.h" #include "stdlib.h" #include "ascodec-target.h" int afe_dev = -1; /* ioctl parameter struct */ struct codec_req_struct { /* This works for every kind of afe.ko module requests */ unsigned char reg; /* Main register address */ unsigned char subreg; /* Set this only if you are reading/writing a PMU register*/ unsigned char value; /* To be read if reading a register; to be set if writing to a register */ } __attribute__((packed)); /* Write to a normal register */ #define IOCTL_REG_WRITE 0x40034101 /* Write to a PMU register */ #define IOCTL_SUBREG_WRITE 0x40034103 /* Read from a normal register */ #define IOCTL_REG_READ 0x80034102 /* Read from a PMU register */ #define IOCTL_SUBREG_READ 0x80034103 int ascodec_init(void) { afe_dev = open("/dev/afe", O_RDWR); return afe_dev; } void ascodec_close(void) { if (afe_dev >= 0) { close(afe_dev); } } /* Read functions returns -1 if fail, otherwise the register's value if success */ /* Write functions return >= 0 if success, otherwise -1 if fail */ int ascodec_write(unsigned int reg, unsigned int value) { struct codec_req_struct r = { .reg = reg, .value = value }; return ioctl(afe_dev, IOCTL_REG_WRITE, &r); } int ascodec_read(unsigned int reg) { struct codec_req_struct r = { .reg = reg }; int retval = ioctl(afe_dev, IOCTL_REG_READ, &r); if (retval >= 0) return r.value; else return retval; } void ascodec_write_pmu(unsigned int index, unsigned int subreg, unsigned int value) { struct codec_req_struct r = {.reg = index, .subreg = subreg, .value = value}; ioctl(afe_dev, IOCTL_SUBREG_WRITE, &r); } int ascodec_read_pmu(unsigned int index, unsigned int subreg) { struct codec_req_struct r = { .reg = index, .subreg = subreg, }; int retval = ioctl(afe_dev, IOCTL_SUBREG_READ, &r); if (retval >= 0) return r.value; else return retval; } int ascodec_readbytes(unsigned int index, unsigned int len, unsigned char *data) { int i, val, ret = 0; for (i = 0; i < (int)len; i++) { val = ascodec_read(i + index); if (val >= 0) data[i] = val; else ret = -1; } return (ret ?: (int)len); } /* * NOTE: * After the conversion to interrupts, ascodec_(lock|unlock) are only used by * adc-as3514.c to protect against other threads corrupting the result by using * the ADC at the same time. this adc_read() doesn't yield but blocks, so * lock/unlock is not needed * * Additionally, concurrent ascodec_?(read|write) calls are instead protected * by the R0's Kernel I2C driver for ascodec (mutexed), so it's automatically * safe */ void ascodec_lock(void) { } void ascodec_unlock(void) { } /* Read 10-bit channel data */ unsigned short adc_read(int channel) { if ((unsigned)channel >= NUM_ADC_CHANNELS) return 0; /* Select channel */ ascodec_write(AS3514_ADC_0, (channel << 4)); unsigned char buf[2]; /* Read data */ if (ascodec_readbytes(AS3514_ADC_0, 2, buf) < 0) return 0; /* decode to 10-bit and return */ return (((buf[0] & 0x3) << 8) | buf[1]); } void adc_init(void) { }