rockbox/firmware/export/config/iriverh300.h

225 lines
6.4 KiB
C
Raw Normal View History

/*
* This config file is for iriver H320, H340
*/
#define IRIVER_H300_SERIES 1
#define MODEL_NAME "iriver H300 series"
/* For Rolo and boot loader */
#define MODEL_NUMBER 2
/* define this if you use an ATA controller */
#define CONFIG_STORAGE STORAGE_ATA
/*define this if the ATA controller and method of USB access support LBA48 */
#define HAVE_LBA48
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 220
#define LCD_HEIGHT 176
/* sqrt(220^2 + 176^2) / 2.0 = 140.9 */
#define LCD_DPI 141
#define LCD_DEPTH 16 /* 65k colours */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
/* remote LCD */
#define LCD_REMOTE_WIDTH 128
#define LCD_REMOTE_HEIGHT 64
#define LCD_REMOTE_DEPTH 1
#define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
/* Remote display colours, for screenshots and sim (0xRRGGBB) */
#define LCD_REMOTE_DARKCOLOR 0x000000
#define LCD_REMOTE_BRIGHTCOLOR 0x5a915a
#define LCD_REMOTE_BL_DARKCOLOR 0x000000
#define LCD_REMOTE_BL_BRIGHTCOLOR 0x82b4fa
#define CONFIG_KEYPAD IRIVER_H300_PAD
#define CONFIG_REMOTE_KEYPAD H300_REMOTE
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_PCF50606
/* define this if you have a disk storage, i.e. something
that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE
/* Define if the device can wake from an RTC alarm */
#define HAVE_RTC_ALARM
/* Define this if you have an remote lcd */
#define HAVE_REMOTE_LCD
/* Define if we have a hardware defect that causes ticking on the audio line */
#define HAVE_REMOTE_LCD_TICKING
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
/* Define this if your LCD can be enabled/disabled */
#define HAVE_LCD_ENABLE
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
#define AB_REPEAT_ENABLE
#define CONFIG_TUNER TEA5767
#define CONFIG_TUNER_XTAL 32768
#define HAVE_UDA1380
/* define this if you have recording possibility */
#define HAVE_RECORDING
#define HAVE_HISTOGRAM
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
/* define hardware samples rate caps mask */
#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
#define HAVE_AGC
#define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Hardware controlled charging with monitoring */
#define CONFIG_CHARGING CHARGING_MONITOR
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* define current usage levels */
#define CURRENT_NORMAL 80 /* 16h playback on 1300mAh battery from IriverRuntime wiki page */
#define CURRENT_BACKLIGHT 23 /* FIXME: This needs to be measured, copied from H100 */
#define CURRENT_RECORD 110 /* additional current while recording */
#define CURRENT_MAX_CHG 650 /* maximum charging current */
#define CURRENT_REMOTE 8 /* additional current when remote connected */
/* define this if the unit can have USB charging disabled by user -
* if USB/MAIN power is discernable and hardware doesn't compel charging */
#define HAVE_USB_CHARGING_ENABLE
/* Define this if you have a Motorola SCF5249 */
#define CONFIG_CPU MCF5249
/* Define this if you want to use coldfire's i2c interface */
#define CONFIG_I2C I2C_COLDFIRE
/* Define this if you can run rockbox from flash memory */
#define HAVE_FLASHED_ROCKBOX
/* The size of the flash ROM */
#define FLASH_SIZE 0x400000
/* Define this to the CPU frequency */
#define CPU_FREQ 11289600
/* Define this if you have ATA power-off control */
#define HAVE_ATA_POWER_OFF
#define CONFIG_LCD LCD_H300
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ISP1362
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define BOOTFILE_EXT "iriver"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define FLASH_BASE 0x00000000
#define BOOTLOADER_ENTRYPOINT 0x003F0000
#define FLASH_RAMIMAGE_ENTRY 0x00001000
#define FLASH_ROMIMAGE_ENTRY 0x00200000
#define FLASH_MAGIC 0xfbfbfbf1
/* Define this if there is an EEPROM chip */
#define HAVE_EEPROM
/* Define this if the EEPROM chip is used */
#define HAVE_EEPROM_SETTINGS
/* Define this for FM radio input available */
#define HAVE_FMRADIO_IN
/** Port-specific settings **/
/* Main LCD contrast range and defaults */
#define MIN_CONTRAST_SETTING 5
#define MAX_CONTRAST_SETTING 63
#define DEFAULT_CONTRAST_SETTING 40
/* Main LCD backlight brightness range and defaults */
/* accepts 0..15 but note that 0 and 1 give a black display on H300! */
#define MIN_BRIGHTNESS_SETTING 2 /* 2/16 (12.50%) */
#define MAX_BRIGHTNESS_SETTING 15 /* 15/16 (93.75%) */
#define DEFAULT_BRIGHTNESS_SETTING 9 /* 9/16 (56.25%) */
/* Remote LCD contrast range and defaults */
#define MIN_REMOTE_CONTRAST_SETTING 5
#define MAX_REMOTE_CONTRAST_SETTING 63
#define DEFAULT_REMOTE_CONTRAST_SETTING 42
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY