2014-11-06 09:31:11 +00:00
<?xml version="1.0"?>
<soc name= "atj213x" desc= "Actions atj213x" >
<dev name= "ADC" long_name= "Analog to Digital Converter" desc= "" version= "1.0" >
<addr name= "ADC" addr= "0xb0110000" />
</dev>
<dev name= "ATA" long_name= "" desc= "" version= "1.0" >
<addr name= "ATA" addr= "0xb0090000" />
<reg name= "CONFIG" desc= "" >
<addr name= "CONFIG" addr= "0x0" />
</reg>
<reg name= "UDMACTL" desc= "" >
<addr name= "UDMACTL" addr= "0x4" />
</reg>
<reg name= "DATA" desc= "" >
<addr name= "DATA" addr= "0x8" />
</reg>
<reg name= "FEATURE" desc= "" >
<addr name= "FEATURE" addr= "0xc" />
</reg>
<reg name= "SECCNT" desc= "" >
<addr name= "SECCNT" addr= "0x10" />
</reg>
<reg name= "SECNUM" desc= "" >
<addr name= "SECNUM" addr= "0x14" />
</reg>
<reg name= "CLDLOW" desc= "" >
<addr name= "CLDL" addr= "0x18" />
</reg>
<reg name= "CLDHI" desc= "" >
<addr name= "CLDHIGH" addr= "0x1c" />
</reg>
<reg name= "HEAD" desc= "" >
<addr name= "HEAD" addr= "0x20" />
</reg>
<reg name= "CMD" desc= "" >
<addr name= "CMD" addr= "0x24" />
</reg>
<reg name= "BYTECNT" desc= "" >
<addr name= "BYTECNT" addr= "0x28" />
</reg>
<reg name= "FIFOCTL" desc= "" >
<addr name= "FIFOCTL" addr= "0x2c" />
</reg>
<reg name= "FIFOCFG" desc= "" >
2015-01-22 12:33:35 +00:00
<addr name= "FIFOCFG" addr= "0x30" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "ADDRDEC" desc= "" >
<addr name= "ADDRDEC" addr= "0x34" />
</reg>
<reg name= "IRQCTL" desc= "" >
<addr name= "IRQCTL" addr= "0x38" />
</reg>
</dev>
<dev name= "BOOT" long_name= "" desc= "" version= "" >
<addr name= "BOOT" addr= "0xb0038000" />
<reg name= "NORCTL" desc= "" >
<addr name= "NORCTL" addr= "0x0" />
</reg>
<reg name= "BROMCTL" desc= "" >
<addr name= "BROMCTL" addr= "0x4" />
</reg>
<reg name= "CHIPID" desc= "" >
<addr name= "CHIPID" addr= "0x8" />
</reg>
</dev>
<dev name= "BT" long_name= "" desc= "" version= "" >
<addr name= "BT" addr= "0xb00d0000" />
</dev>
<dev name= "CMU" long_name= "Clock Management Unit" desc= "" version= "1.0" >
<addr name= "CMU" addr= "0xb0010000" />
<reg name= "COREPLL" desc= "" >
<addr name= "COREPLL" addr= "0x0" />
2014-11-27 23:18:02 +00:00
<field name= "RESERVED31_11" desc= "" bitrange= "31:11" />
<field name= "CPBY" desc= "Core PLL Bypass " bitrange= "10:10" />
<field name= "CPBI" desc= "Core PLL Bias " bitrange= "9:8" />
<field name= "CPEN" desc= "Core PLL Enable " bitrange= "7:7" />
<field name= "HOEN" desc= "High Oscillator Enable" bitrange= "6:6" />
<field name= "CPCK" desc= "COREPLLout = CPCK * 6 (MHz) (in range 12 - 378MHz)" bitrange= "5:0" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "DSPPLL" desc= "" >
<addr name= "DSPPLL" addr= "0x4" />
2014-11-27 23:18:02 +00:00
<field name= "RESERVED31_9" desc= "" bitrange= "31:9" />
<field name= "DPBI" desc= "DSP PLL Bias" bitrange= "8:7" />
<field name= "DPEN" desc= "DSP PLL Enable" bitrange= "6:6" />
<field name= "DPCK" desc= "DSPPLLout = DPCK * 6 (MHz) (in range 12-378MHz)" bitrange= "5:0" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "AUDIOPLL" desc= "" >
<addr name= "AUDIOPLL" addr= "0x8" />
2014-11-27 23:18:02 +00:00
<field name= "RESERVED31_12" desc= "" bitrange= "31:12" />
<field name= "ADCPLL" desc= "Audio PLL CLk Control" bitrange= "11:11" />
<field name= "ADCCLK" desc= "ADC Clock Divisor, output is FS*256" bitrange= "10:8" />
<field name= "RESERVED7" desc= "" bitrange= "7:7" />
<field name= "APBI" desc= "Audio PLL Bias" bitrange= "6:5" />
<field name= "APEN" desc= "Audio PLL Enable" bitrange= "4:4" />
<field name= "DACPLL" desc= "DAC PLL CLk Control" bitrange= "3:3" />
<field name= "DACCLK" desc= "DAC Clock Divisor, output is FS*256" bitrange= "2:0" />
2014-11-06 09:31:11 +00:00
</reg>
2014-11-27 23:18:02 +00:00
<reg name= "BUSCLK" desc= "Bus CLK Control Register" >
2014-11-06 09:31:11 +00:00
<addr name= "BUSCLK" addr= "0xc" />
2014-11-27 23:18:02 +00:00
<field name= "KEYE" desc= "Key Wakeup Enable" bitrange= "31:31" />
<field name= "ALME" desc= "Alarm Wakeup Enable" bitrange= "30:30" />
<field name= "SIRE" desc= "SIRQ Wakeup Enable" bitrange= "29:29" />
<field name= "RESERVED28" desc= "" bitrange= "28:28" />
<field name= "USBE" desc= "Usb Wakeup Enable" bitrange= "27:27" />
2015-01-22 12:33:35 +00:00
<field name= "RESERVED26_12" desc= "" bitrange= "26:12" />
2014-11-27 23:18:02 +00:00
<field name= "PCLKDIV" desc= "Peripheral CLK Divisor" bitrange= "11:8" />
<field name= "CORECLKS" desc= "CPU Clock Selection" bitrange= "7:6" />
<field name= "SCLKDIV" desc= "System Clock Divisor" bitrange= "5:4" />
<field name= "CCLKDIV" desc= "CPU Clock Divisor" bitrange= "3:2" />
<field name= "DCEN" desc= "Core CLK DC Enable" bitrange= "1:1" />
</reg>
<reg name= "SDRCLK" desc= "SDRAM Interface CLK Control Register" >
2014-11-06 09:31:11 +00:00
<addr name= "SDRCLK" addr= "0x10" />
2014-11-27 23:18:02 +00:00
<field name= "RESERVED31_2" desc= "" bitrange= "31:2" />
<field name= "SDRDIV" desc= "" bitrange= "1:0" />
2014-11-06 09:31:11 +00:00
</reg>
2014-11-27 23:18:02 +00:00
<reg name= "NANDCLK" desc= "NAND Interface CLK Control Register" >
2014-11-06 09:31:11 +00:00
<addr name= "NANDCLK" addr= "0x18" />
2014-11-27 23:18:02 +00:00
<field name= "RESERVED31_4" desc= "" bitrange= "31:4" />
<field name= "NANDDIV" desc= "" bitrange= "3:0" />
2014-11-06 09:31:11 +00:00
</reg>
2014-11-27 23:18:02 +00:00
<reg name= "SDCLK" desc= "SD Interface CLK Control Register " >
2014-11-06 09:31:11 +00:00
<addr name= "SDCLK" addr= "0x1c" />
2014-11-27 23:18:02 +00:00
<field name= "RESERVED31_6" desc= "" bitrange= "31:6" />
<field name= "CKEN" desc= "SD Interface Clock Enable" bitrange= "5:5" />
<field name= "D128" desc= "Enable Divide 128 circuit" bitrange= "4:4" />
<field name= "SDDIV" desc= "" bitrange= "3:0" />
2014-11-06 09:31:11 +00:00
</reg>
2014-11-27 23:18:02 +00:00
<reg name= "MHACLK" desc= "MHA CLK Control Register" >
2014-11-06 09:31:11 +00:00
<addr name= "MHACLK" addr= "0x20" />
2014-11-27 23:18:02 +00:00
<field name= "RESERVED31_4" desc= "" bitrange= "31:4" />
<field name= "MHADIV" desc= "" bitrange= "3:0" />
2014-11-06 09:31:11 +00:00
</reg>
2014-11-27 23:18:02 +00:00
<reg name= "UART2CLK" desc= "Uart2 CLK Control Register" >
2014-11-06 09:31:11 +00:00
<addr name= "UART2CLK" addr= "0x2c" />
2014-11-27 23:18:02 +00:00
<field name= "RESERVED31_17" desc= "" bitrange= "31:17" />
<field name= "U2EN" desc= "Uart2 Clock Enable " bitrange= "16:16" />
<field name= "UART2DIV" desc= "" bitrange= "15:0" />
2014-11-06 09:31:11 +00:00
</reg>
2014-11-27 23:18:02 +00:00
<reg name= "DMACLK" desc= "DMA CLK Control Register" >
2014-11-06 09:31:11 +00:00
<addr name= "DMACLK" addr= "0x30" />
2014-11-27 23:18:02 +00:00
<field name= "RESERVED31_4" desc= "" bitrange= "31:4" />
<field name= "D7EN" desc= "DMA 7 (Special Channel) Clock Enable" bitrange= "3:3" />
<field name= "D6EN" desc= "DMA 6 (Special Channel) Clock Enable" bitrange= "2:2" />
<field name= "D5EN" desc= "DMA 5 (Special Channel) Clock Enable" bitrange= "1:1" />
<field name= "D4EN" desc= "DMA 4 (Special Channel) Clock Enable" bitrange= "0:0" />
2014-11-06 09:31:11 +00:00
</reg>
2014-11-27 23:18:02 +00:00
<reg name= "FMCLK" desc= "FM CLK Control Register" >
2014-11-06 09:31:11 +00:00
<addr name= "FMCLK" addr= "0x34" />
2014-11-27 23:18:02 +00:00
<field name= "RESERVED31_6" desc= "" bitrange= "31:6" />
<field name= "BCKE" desc= "PWM Back Light clock Enable" bitrange= "5:5" />
<field name= "BCKS" desc= "Back Light CLK source select" bitrange= "4:4" />
<field name= "BCKCON" desc= "Divided PWM Back Light Special Clock Control" bitrange= "3:2" />
<field name= "CLKS" desc= "FM Clock Output Selection" bitrange= "1:1" />
<field name= "OUTE" desc= "FM Clock Output Enable (From Test Pin)" bitrange= "0:0" />
</reg>
<reg name= "MCACLK" desc= "MCA CLK Control Register" >
2014-11-06 09:31:11 +00:00
<addr name= "MCACLK" addr= "0x38" />
2014-11-27 23:18:02 +00:00
<field name= "RESERVED31_4" desc= "" bitrange= "31:4" />
<field name= "MCADIV" desc= "" bitrange= "3:0" />
2014-11-06 09:31:11 +00:00
</reg>
2014-11-27 23:18:02 +00:00
<reg name= "DEVCLKEN" desc= "Device CLK Control Register" >
2014-11-06 09:31:11 +00:00
<addr name= "DEVCLKEN" addr= "0x80" />
2014-11-18 22:29:51 +00:00
<field name= "RESERVED31_27" desc= "" bitrange= "31:27" />
<field name= "GPIO" desc= "" bitrange= "26:26" />
<field name= "KEY" desc= "" bitrange= "25:25" />
<field name= "RESERVED24" desc= "" bitrange= "24:24" />
<field name= "I2C" desc= "" bitrange= "23:23" />
<field name= "UART" desc= "" bitrange= "22:22" />
<field name= "RESERVED21_19" desc= "" bitrange= "21:19" />
<field name= "ADC" desc= "" bitrange= "18:18" />
<field name= "DAC" desc= "" bitrange= "17:17" />
<field name= "DSPC" desc= "" bitrange= "16:16" />
<field name= "MCA" desc= "" bitrange= "15:15" />
<field name= "MHA" desc= "" bitrange= "14:14" />
<field name= "USBC" desc= "" bitrange= "13:13" />
<field name= "RESERVED12" desc= "" bitrange= "12:12" />
<field name= "SD" desc= "" bitrange= "11:11" />
<field name= "RESERVED10" desc= "" bitrange= "10:10" />
<field name= "NAND" desc= "" bitrange= "9:9" />
<field name= "DMAC" desc= "" bitrange= "8:8" />
<field name= "PCNT" desc= "" bitrange= "7:7" />
<field name= "SDRM" desc= "" bitrange= "6:6" />
<field name= "SDRC" desc= "" bitrange= "5:5" />
<field name= "DSPM" desc= "" bitrange= "4:4" />
<field name= "RESERVED3" desc= "" bitrange= "3:3" />
<field name= "RMOC" desc= "" bitrange= "2:2" />
<field name= "YUV" desc= "" bitrange= "1:1" />
<field name= "RESERVED0" desc= "" bitrange= "0:0" />
2014-11-06 09:31:11 +00:00
</reg>
2014-11-27 23:18:02 +00:00
<reg name= "DEVRST" desc= "Device Reset Control Register" >
2014-11-06 09:31:11 +00:00
<addr name= "DEVRST" addr= "0x84" />
2014-11-27 23:18:02 +00:00
<field name= "RESERVED31" desc= "" bitrange= "31:31" />
<field name= "GPIO" desc= "" bitrange= "30:30" />
<field name= "KEY" desc= "" bitrange= "29:29" />
<field name= "RESERVED28" desc= "" bitrange= "28:28" />
<field name= "I2C" desc= "" bitrange= "27:27" />
<field name= "UART" desc= "" bitrange= "26:26" />
<field name= "RESERVED25_23" desc= "" bitrange= "25:23" />
<field name= "ADC" desc= "" bitrange= "22:22" />
<field name= "DAC" desc= "" bitrange= "21:21" />
<field name= "DSPC" desc= "DSP control block reset" bitrange= "20:20" />
<field name= "INTC" desc= "" bitrange= "19:19" />
<field name= "RTC" desc= "" bitrange= "18:18" />
<field name= "PMU" desc= "" bitrange= "17:17" />
<field name= "RESERVED16_14" desc= "" bitrange= "16:14" />
<field name= "DSPM" desc= "SRAM DSP MEM reset" bitrange= "13:13" />
<field name= "TVENC" desc= "" bitrange= "12:12" />
<field name= "YUV" desc= "" bitrange= "11:11" />
<field name= "MCA" desc= "" bitrange= "10:10" />
<field name= "USB" desc= "" bitrange= "9:9" />
<field name= "RESERVED8" desc= "" bitrange= "8:8" />
<field name= "MHA" desc= "" bitrange= "7:7" />
<field name= "SD" desc= "" bitrange= "6:6" />
<field name= "NAND" desc= "" bitrange= "5:5" />
<field name= "RESERVED4" desc= "" bitrange= "4:4" />
<field name= "DMAC" desc= "" bitrange= "3:3" />
<field name= "PCNT" desc= "" bitrange= "2:2" />
<field name= "RESERVED1" desc= "" bitrange= "1:1" />
<field name= "SDR" desc= "SDRAM Control register and SDRAM block Reset" bitrange= "0:0" />
2014-11-06 09:31:11 +00:00
</reg>
</dev>
<dev name= "DAC" long_name= "Digital Analog Converter" desc= "" version= "1.0" >
<addr name= "DAC" addr= "0xb0100000" />
</dev>
<dev name= "DMAC" long_name= "Direct Memory Access Controller" desc= "Channels 0-3 work with retular AHB bus, channels 4-7 work with 'special' bus." version= "" >
<addr name= "DMAC" addr= "0xb0060000" />
<reg name= "CTL" desc= "" >
<addr name= "CTL" addr= "0x0" />
</reg>
<reg name= "IRQEN" desc= "" >
<addr name= "IRQEN" addr= "0x4" />
</reg>
<reg name= "IRQPD" desc= "" >
<addr name= "IRQPD" addr= "0x8" />
</reg>
<reg name= "DMA_MODE" desc= "" >
2015-01-23 10:03:49 +00:00
<formula string= "0x100+n*0x20" />
<addr name= "DMA_MODE0" addr= "0x100" />
<addr name= "DMA_MODE1" addr= "0x120" />
<addr name= "DMA_MODE2" addr= "0x140" />
<addr name= "DMA_MODE3" addr= "0x160" />
<addr name= "DMA_MODE4" addr= "0x180" />
<addr name= "DMA_MODE5" addr= "0x1a0" />
<addr name= "DMA_MODE6" addr= "0x1c0" />
<addr name= "DMA_MODE7" addr= "0x1e0" />
2014-11-06 09:31:11 +00:00
<field name= "DBURLEN" desc= "Destination burst length. If burst lenght is 4 or 8 DDIR must be 0, DFXA must be 0, DDSP must be 0, DCOL must be 0. Burst must not cross a 1kB address boundary." bitrange= "31:29" >
<value name= "SINGLE" value= "0x0" desc= "" />
<value name= "INCR4" value= "0x3" desc= "" />
<value name= "INCR8" value= "0x5" desc= "" />
</field>
<field name= "RELO" desc= "DMA Reload Bit." bitrange= "28:28" />
<field name= "DDSP" desc= "Destination DSP mode. " bitrange= "27:27" />
<field name= "DCOL" desc= "Destination Column Mode." bitrange= "26:26" />
<field name= "DDIR" desc= "Destination address direction. If DBURLEN is INCR4 or INCR8 only INCREASE is allowed." bitrange= "25:25" >
<value name= "INCREASE" value= "0x0" desc= "" />
<value name= "DECREASE" value= "0x1" desc= "" />
</field>
<field name= "DFXA" desc= "Destination Fixed Address bit." bitrange= "24:24" >
<value name= "NOT_FIXED" value= "0x0" desc= "" />
<value name= "FIXED" value= "0x1" desc= "" />
</field>
<field name= "DTRG" desc= "Destination DRQ Trig Source." bitrange= "23:19" >
<value name= "DAC" value= "0x6" desc= "" />
<value name= "SDRAM" value= "0x10" desc= "" />
<value name= "IRAM" value= "0x11" desc= "" />
<value name= "SD" value= "0x16" desc= "" />
<value name= "OTG" value= "0x17" desc= "" />
<value name= "LCM" value= "0x18" desc= "" />
</field>
<field name= "DTRANWID" desc= "" bitrange= "18:17" >
<value name= "WIDTH8" value= "0x0" desc= "" />
<value name= "WIDTH16" value= "0x1" desc= "" />
<value name= "WIDTH32" value= "0x2" desc= "" />
</field>
<field name= "DFXS" desc= "If DFXS=0, DMA will transfer in 8bit mode when remain counter is less than DTRANWID. If DFXS=1, DMA will always transfer in DTRANWID. " bitrange= "16:16" />
<field name= "SBURLEN" desc= "Source burst length. If burst lenght is 4 or 8 DDIR must be 0, DFXA must be 0, DDSP must be 0, DCOL must be 0. Burst must not cross a 1kB address boundary." bitrange= "15:13" >
<value name= "SINGLE" value= "0x0" desc= "" />
<value name= "INCR4" value= "0x3" desc= "" />
<value name= "INCR8" value= "0x5" desc= "" />
</field>
<field name= "SDSP" desc= "Source DSP mode. " bitrange= "11:11" />
<field name= "SCOL" desc= "Source Column Mode." bitrange= "10:10" />
<field name= "SDIR" desc= "Source address direction. If SBURLEN is INCR4 or INCR8 only INCREASE is allowed." bitrange= "9:9" >
<value name= "INCREASE" value= "0x0" desc= "" />
<value name= "DECREASE" value= "0x1" desc= "" />
</field>
<field name= "SFXA" desc= "Source Fixed Addres bit." bitrange= "8:8" >
<value name= "NOT_FIXED" value= "0x0" desc= "" />
<value name= "FIXED" value= "0x1" desc= "" />
</field>
<field name= "STRG" desc= "DRQ trig source." bitrange= "7:3" >
<value name= "DAC" value= "0x6" desc= "" />
<value name= "SDRAM" value= "0x10" desc= "" />
<value name= "IRAM" value= "0x11" desc= "" />
<value name= "SD" value= "0x16" desc= "" />
<value name= "OTG" value= "0x17" desc= "" />
<value name= "LCM" value= "0x18" desc= "" />
</field>
<field name= "STRANWID" desc= "" bitrange= "2:1" >
<value name= "WIDTH8" value= "0x0" desc= "" />
<value name= "WIDTH16" value= "0x1" desc= "" />
<value name= "WIDTH32" value= "0x2" desc= "" />
</field>
<field name= "SFXS" desc= "Source Fix Size. If DFXS=0, DMA will transfer in 8bit mode when remain counter is less than STRANWID. If SFXS=1, DMA will always transfer in STRANWID." bitrange= "0:0" />
</reg>
<reg name= "DMA_SRC" desc= "" >
2015-01-23 10:03:49 +00:00
<formula string= "0x104+n*0x20" />
<addr name= "DMA_SRC0" addr= "0x104" />
<addr name= "DMA_SRC1" addr= "0x124" />
<addr name= "DMA_SRC2" addr= "0x144" />
<addr name= "DMA_SRC3" addr= "0x164" />
<addr name= "DMA_SRC4" addr= "0x184" />
<addr name= "DMA_SRC5" addr= "0x1a4" />
<addr name= "DMA_SRC6" addr= "0x1c4" />
<addr name= "DMA_SRC7" addr= "0x1e4" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "DMA_DST" desc= "" >
2015-01-23 10:03:49 +00:00
<formula string= "0x108+n*0x20" />
<addr name= "DMA_DST0" addr= "0x108" />
<addr name= "DMA_DST1" addr= "0x128" />
<addr name= "DMA_DST2" addr= "0x148" />
<addr name= "DMA_DST3" addr= "0x168" />
<addr name= "DMA_DST4" addr= "0x188" />
<addr name= "DMA_DST5" addr= "0x1a8" />
<addr name= "DMA_DST6" addr= "0x1c8" />
<addr name= "DMA_DST7" addr= "0x1e8" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "DMA_CNT" desc= "" >
2015-01-23 10:03:49 +00:00
<formula string= "0x10c+n*0x20" />
<addr name= "DMA_CNT0" addr= "0x10c" />
<addr name= "DMA_CNT1" addr= "0x12c" />
<addr name= "DMA_CNT2" addr= "0x14c" />
<addr name= "DMA_CNT3" addr= "0x16c" />
<addr name= "DMA_CNT4" addr= "0x18c" />
<addr name= "DMA_CNT5" addr= "0x1ac" />
<addr name= "DMA_CNT6" addr= "0x1cc" />
<addr name= "DMA_CNT7" addr= "0x1ec" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "DMA_REM" desc= "" >
2015-01-23 10:03:49 +00:00
<formula string= "0x110+n*0x20" />
<addr name= "DMA_REM0" addr= "0x110" />
<addr name= "DMA_REM1" addr= "0x130" />
<addr name= "DMA_REM2" addr= "0x150" />
<addr name= "DMA_REM3" addr= "0x170" />
<addr name= "DMA_REM4" addr= "0x190" />
<addr name= "DMA_REM5" addr= "0x1b0" />
<addr name= "DMA_REM6" addr= "0x1d0" />
<addr name= "DMA_REM7" addr= "0x1f0" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "DMA_CMD" desc= "" >
2015-01-23 10:03:49 +00:00
<formula string= "0x114+n*0x20" />
<addr name= "DMA_CMD0" addr= "0x114" />
<addr name= "DMA_CMD1" addr= "0x134" />
<addr name= "DMA_CMD2" addr= "0x154" />
<addr name= "DMA_CMD3" addr= "0x174" />
<addr name= "DMA_CMD4" addr= "0x194" />
<addr name= "DMA_CMD5" addr= "0x1b4" />
<addr name= "DMA_CMD6" addr= "0x1d4" />
<addr name= "DMA_CMD7" addr= "0x1f4" />
2014-11-06 09:31:11 +00:00
</reg>
</dev>
<dev name= "DSP" long_name= "Digital Signal Processor" desc= "" version= "1.0" >
<addr name= "DSP" addr= "0xb0050000" />
<reg name= "HDR" desc= "HIP data registers" >
<addr name= "HDR0" addr= "0x0" />
<addr name= "HDR1" addr= "0x4" />
<addr name= "HDR2" addr= "0x8" />
<addr name= "HDR3" addr= "0xc" />
<addr name= "HDR4" addr= "0x10" />
<addr name= "HDR5" addr= "0x14" />
<addr name= "HSR6" addr= "0x18" />
<addr name= "HSR7" addr= "0x1c" />
</reg>
<reg name= "CTL" desc= "" >
<addr name= "CTL" addr= "0x20" />
</reg>
</dev>
<dev name= "GPIO" long_name= "" desc= "" version= "1.0" >
<addr name= "GPIO" addr= "0xb01c0000" />
2014-11-18 22:29:51 +00:00
<reg name= "OUTEN" desc= "" >
<addr name= "AOUTEN" addr= "0x0" />
<addr name= "BOUTEN" addr= "0xc" />
</reg>
<reg name= "INEN" desc= "" >
<addr name= "AINEN" addr= "0x4" />
<addr name= "BINEN" addr= "0x10" />
</reg>
<reg name= "DAT" desc= "" >
<addr name= "ADAT" addr= "0x8" />
<addr name= "BDAT" addr= "0x14" />
</reg>
<reg name= "MFCTL0" desc= "" >
2014-11-24 17:29:04 +00:00
<addr name= "MFCTL0" addr= "0x18" />
<field name= "RESERVED31_25" desc= "" bitrange= "31:25" />
<field name= "GPIOA2_0" desc= "" bitrange= "24:22" >
<value name= "NAND_CLE_RB_ALE" value= "0x1" desc= "" />
<value name= "LCD_RS_WD9_WD0" value= "0x2" desc= "" />
<value name= "SD_CMD" value= "0x4" desc= "" />
</field>
<field name= "CEB6" desc= "" bitrange= "21:20" >
<value name= "LCD_CE" value= "0x2" desc= "" />
<value name= "SD_CLK" value= "0x3" desc= "" />
</field>
<field name= "RESERVED19_16" desc= "" bitrange= "19:16" />
<field name= "CEB3" desc= "" bitrange= "15:14" >
<value name= "NAND_CEB3" value= "0x1" desc= "" />
<value name= "LCD_CE" value= "0x2" desc= "" />
</field>
<field name= "CEB2" desc= "" bitrange= "13:12" >
<value name= "NAND_CEB2" value= "0x1" desc= "" />
<value name= "LCD_CE" value= "0x2" desc= "" />
</field>
<field name= "CEB1" desc= "" bitrange= "11:10" >
<value name= "NAND_CEB1" value= "0x1" desc= "" />
<value name= "LCD_CE" value= "0x2" desc= "" />
</field>
<field name= "CEB0" desc= "" bitrange= "9:8" >
<value name= "NAND_CEB0" value= "0x1" desc= "" />
<value name= "LCD_CE" value= "0x2" desc= "" />
</field>
<field name= "WRRD" desc= "" bitrange= "7:6" >
<value name= "NAND_WR_RD" value= "0x1" desc= "" />
<value name= "LCD_WRB_RDB" value= "0x2" desc= "" />
</field>
<field name= "NAND_D7_0" desc= "" bitrange= "5:3" >
<value name= "NAND_D7_0" value= "0x1" desc= "" />
<value name= "LCD_WD17_10" value= "0x2" desc= "" />
</field>
<field name= "NAND_D15_8" desc= "" bitrange= "2:0" >
<value name= "NAND_D15_8" value= "0x1" desc= "" />
<value name= "LCD_WD8_1" value= "0x2" desc= "" />
<value name= "SDR_D7_0" value= "0x4" desc= "" />
</field>
2014-11-18 22:29:51 +00:00
</reg>
<reg name= "MFCTL1" desc= "" >
<addr name= "MFCTL1" addr= "0x1c" />
2014-11-24 17:29:04 +00:00
<field name= "MFEN" desc= "" bitrange= "31:31" />
<field name= "RESERVED30_18" desc= "" bitrange= "30:18" />
<field name= "SD2E" desc= "" bitrange= "17:17" />
<field name= "RBS" desc= "" bitrange= "16:16" />
<field name= "RESERVED15_12" desc= "" bitrange= "15:12" />
<field name= "SIR0" desc= "" bitrange= "11:11" />
<field name= "SPTR" desc= "" bitrange= "10:9" >
<value name= "I2C1_SCL_ADA" value= "0x1" desc= "" />
<value name= "UART2_TX_RX" value= "0x2" desc= "" />
</field>
<field name= "U2TR" desc= "" bitrange= "8:8" >
<value name= "UART2_TX_RX" value= "0x0" desc= "" />
<value name= "I2C2_SCL_SDA" value= "0x1" desc= "" />
</field>
<field name= "RESERVED7_6" desc= "" bitrange= "7:6" />
<field name= "I2C1SS" desc= "" bitrange= "5:4" >
<value name= "I2C1_SCL_SDA" value= "0x0" desc= "" />
<value name= "UART2_TX_RX" value= "0x1" desc= "" />
</field>
<field name= "RESERVED3_0" desc= "" bitrange= "3:0" />
2014-11-18 22:29:51 +00:00
</reg>
2014-11-06 09:31:11 +00:00
</dev>
<dev name= "I2C" long_name= "" desc= "" version= "1.0" >
2014-11-27 23:18:02 +00:00
<addr name= "I2C1" addr= "0xb0180000" />
<addr name= "I2C2" addr= "0xb0180020" />
<reg name= "CTL" desc= "" >
<addr name= "CTL" addr= "0x0" />
<field name= "RESERVED31_9" desc= "" bitrange= "31:9" />
<field name= "PUEN" desc= "nternal Pull-up Resistor (4.7k) Enable" bitrange= "8:8" />
<field name= "EN" desc= "Block enable" bitrange= "7:7" />
<field name= "SIE" desc= "START Condition Generates IRQ Enable (only for slave mode)" bitrange= "6:6" />
<field name= "IRQE" desc= "IRQ Enable" bitrange= "5:5" />
<field name= "MS" desc= "Mode select" bitrange= "4:4" >
<value name= "MASTER" value= "0x0" desc= "" />
2015-01-22 12:33:35 +00:00
<value name= "SLAVE" value= "0x1" desc= "" />
2014-11-27 23:18:02 +00:00
</field>
<field name= "GBCC" desc= "Generating Bus Control Condition (only for master mode)" bitrange= "3:2" >
<value name= "NOP" value= "0x0" desc= "" />
<value name= "START" value= "0x1" desc= "" />
<value name= "STOP" value= "0x2" desc= "" />
<value name= "REPEATED_START" value= "0x3" desc= "" />
</field>
<field name= "RB" desc= "Release Bus. Writing 1 to this bit will release the clock and data line to idle. MCU should write 1 to this bit after transmitting or receiving the last bit of the whole transfer. " bitrange= "1:1" />
<field name= "GRAS" desc= "Generating/Receiving Acknowledge Signal" bitrange= "0:0" />
</reg>
<reg name= "CLKDIV" desc= "" >
<addr name= "CLKDIV" addr= "0x4" />
<field name= "RESERVED31_8" desc= "" bitrange= "31:8" />
<field name= "CLKDIV" desc= "Clock Divider Factor (only for master mode). I2Cx clock (SCL) can select standard (100kbps) mode and fast (400kbps) mode. Calculating SCL is as follows: SCL=PCLK/(CLKDIV*16) " bitrange= "7:0" />
</reg>
<reg name= "STAT" desc= "" >
<addr name= "STAT" addr= "0x8" />
<field name= "RESERVED31_8" desc= "" bitrange= "31:8" />
<field name= "TRC" desc= "Transmit/Receive Complete Bit" bitrange= "7:7" />
<field name= "STPD" desc= "STOP Detect Bit " bitrange= "6:6" />
<field name= "STAD" desc= "START Detect Bit" bitrange= "5:5" />
<field name= "RWST" desc= "Read/Write Status Bit (only for Slave mode)" bitrange= "4:4" />
<field name= "LBST" desc= "Last Byte Status Bit" bitrange= "3:3" />
<field name= "IRQP" desc= "IRQ Pending Bit" bitrange= "2:2" />
<field name= "OVST" desc= "Overflow Status Bit" bitrange= "1:1" />
<field name= "WCO" desc= "Writing Collision Bit" bitrange= "0:0" />
</reg>
<reg name= "ADDR" desc= "" >
<addr name= "ADDR" addr= "0xc" />
<field name= "RESERVED31_8" desc= "" bitrange= "31:8" />
<field name= "SDAD" desc= "Slave Device Address" bitrange= "7:1" />
<field name= "RWCM" desc= "Read/Write Control or Match" bitrange= "0:0" />
</reg>
<reg name= "DAT" desc= "" >
<addr name= "DAT" addr= "0x10" />
<field name= "RESERVED31_8" desc= "" bitrange= "31:8" />
<field name= "TXRXDAT" desc= "Transmit/Receive Data" bitrange= "7:0" />
</reg>
2014-11-06 09:31:11 +00:00
</dev>
<dev name= "INTC" long_name= "Interrupt Controller" desc= "" version= "1.0" >
<addr name= "INTC" addr= "0xb0020000" />
<reg name= "PD" desc= "" >
<addr name= "PD" addr= "0x0" />
</reg>
<reg name= "MSK" desc= "" >
<addr name= "MSK" addr= "0x4" />
</reg>
<reg name= "CFG" desc= "" >
<addr name= "CFG0" addr= "0x8" />
<addr name= "CFG1" addr= "0xc" />
<addr name= "CFG2" addr= "0x10" />
</reg>
<reg name= "EXTCTL" desc= "" >
<addr name= "EXTCTL" addr= "0x14" />
</reg>
</dev>
<dev name= "IR" long_name= "" desc= "" version= "1.0" >
<addr name= "IR" addr= "0xb0160010" />
</dev>
<dev name= "KEY" long_name= "" desc= "" version= "1.0" >
<addr name= "KEY" addr= "0xb01a0000" />
</dev>
<dev name= "MCA" long_name= "Motion Compensation Accelerator" desc= "" version= "1.0" >
<addr name= "MCA" addr= "0xb0080000" />
<reg name= "CTL" desc= "" >
<addr name= "CTL" addr= "0x0" />
</reg>
</dev>
<dev name= "MHA" long_name= "Media Hardware Accelerator" desc= "" version= "1.0" >
<addr name= "MHA" addr= "0xb00c0000" />
<reg name= "CTL" desc= "" >
<addr name= "CTL" addr= "0x0" />
</reg>
<reg name= "CFG" desc= "" >
<addr name= "CFG" addr= "0x4" />
</reg>
<reg name= "DCSCLx" desc= "" >
<addr name= "DCSCL0" addr= "0x10" />
<addr name= "DCSCL1" addr= "0x14" />
<addr name= "DCSCL2" addr= "0x18" />
<addr name= "DCSCL3" addr= "0x1c" />
</reg>
<reg name= "QSCL" desc= "" >
<addr name= "QSCL" addr= "0x20" />
</reg>
</dev>
<dev name= "NAND" long_name= "NAND Flash Interface" desc= "" version= "1.0" >
<addr name= "NAND" addr= "0xb00a0000" />
<reg name= "CTL" desc= "" >
<addr name= "CTL" addr= "0x0" />
</reg>
<reg name= "STATUS" desc= "" >
<addr name= "STATUS" addr= "0x4" />
</reg>
<reg name= "FIFOTIM" desc= "" >
<addr name= "FIFOTIM" addr= "0x8" />
</reg>
<reg name= "CLKCTL" desc= "" >
<addr name= "CLKCTL" addr= "0xc" />
</reg>
<reg name= "BYTECNT" desc= "" >
<addr name= "BYTECNT" addr= "0x10" />
</reg>
<reg name= "ADDR01" desc= "" >
<addr name= "ADDR01" addr= "0x14" />
</reg>
<reg name= "ADDR23" desc= "" >
<addr name= "ADDR23" addr= "0x18" />
</reg>
<reg name= "ADDR45" desc= "" >
<addr name= "ADDR45" addr= "0x1c" />
</reg>
<reg name= "ADDR67" desc= "" >
<addr name= "ADDR67" addr= "0x20" />
</reg>
<reg name= "BUF" desc= "" >
<addr name= "BUF0" addr= "0x24" />
<addr name= "BUF1" addr= "0x28" />
</reg>
<reg name= "CMD" desc= "" >
<addr name= "CMD" addr= "0x2c" />
</reg>
<reg name= "ECCCTL" desc= "" >
<addr name= "ECCCTL" addr= "0x30" />
</reg>
<reg name= "HAMECC" desc= "" >
<addr name= "HAMECC0" addr= "0x34" />
<addr name= "HAMECC1" addr= "0x38" />
<addr name= "HAMECC2" addr= "0x3c" />
</reg>
<reg name= "HAMCEC" desc= "" >
<addr name= "HAMCEC" addr= "0x40" />
</reg>
<reg name= "RSE" desc= "" >
<addr name= "RSE0" addr= "0x44" />
<addr name= "RSE1" addr= "0x48" />
<addr name= "RSE2" addr= "0x4c" />
<addr name= "RSE3" addr= "0x50" />
</reg>
<reg name= "RSPS" desc= "" >
<addr name= "RSPS0" addr= "0x54" />
<addr name= "RSPS1" addr= "0x58" />
<addr name= "RSPS2" addr= "0x5c" />
</reg>
<reg name= "FIFODATA" desc= "" >
<addr name= "FIFODATA" addr= "0x60" />
</reg>
<reg name= "DEBUG" desc= "" >
<addr name= "DEBUG" addr= "0x70" />
</reg>
</dev>
<dev name= "PCM" long_name= "" desc= "" version= "1.0" >
<addr name= "PCM" addr= "0xb0150000" />
</dev>
<dev name= "PCNT" long_name= "Performance Counters" desc= "The base address is not clear!" version= "1.0" >
<addr name= "PCNT" addr= "0xb003c000" />
<reg name= "CTL" desc= "" >
<addr name= "CTL" addr= "0x0" />
</reg>
<reg name= "PCx" desc= "" >
<addr name= "PC0" addr= "0x4" />
<addr name= "PC1" addr= "0x8" />
</reg>
</dev>
<dev name= "PMU" long_name= "Power Management Unit" desc= "" version= "1.0" >
<addr name= "PMU" addr= "0xb0000000" />
<reg name= "CTL" desc= "" >
<addr name= "CTL" addr= "0x0" />
2014-11-18 22:29:51 +00:00
<field name= "LBRM" desc= "" bitrange= "31:31" />
<field name= "VCVS" desc= "" bitrange= "30:28" />
<field name= "LBNM" desc= "" bitrange= "27:27" />
<field name= "VDVS" desc= "" bitrange= "26:24" />
<field name= "VCDE" desc= "" bitrange= "23:23" />
<field name= "VCVD" desc= "" bitrange= "22:20" />
<field name= "VDDE" desc= "" bitrange= "19:19" />
<field name= "VDVD" desc= "" bitrange= "18:16" />
<field name= "BLEN" desc= "" bitrange= "15:15" />
<field name= "VCOE" desc= "" bitrange= "14:14" />
<field name= "LA6E" desc= "" bitrange= "13:13" />
<field name= "LA4E" desc= "" bitrange= "12:12" />
<field name= "IBIAS" desc= "" bitrange= "11:10" />
<field name= "OSCFREQ" desc= "" bitrange= "9:8" />
<field name= "DC1M" desc= "" bitrange= "7:7" />
<field name= "DC2M" desc= "" bitrange= "6:6" />
<field name= "BLVS" desc= "" bitrange= "5:3" />
<field name= "VDV0" desc= "" bitrange= "2:2" />
<field name= "PWRM" desc= "" bitrange= "1:0" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "LRADC" desc= "" >
<addr name= "LRADC" addr= "0x4" />
2014-11-18 22:29:51 +00:00
<field name= "RESERVED31_28" desc= "" bitrange= "31:28" />
<field name= "REMOADC4" desc= "" bitrange= "27:24" />
<field name= "RESERVED23_20" desc= "" bitrange= "23:22" />
<field name= "BATADC6" desc= "" bitrange= "21:16" />
<field name= "RESERVED15_14" desc= "" bitrange= "15:14" />
<field name= "TEMPADC6" desc= "" bitrange= "13:8" />
<field name= "RESERVED7_0" desc= "" bitrange= "7:0" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "CHG" desc= "" >
<addr name= "CHG" addr= "0x8" />
2014-11-18 22:29:51 +00:00
<field name= "EN" desc= "" bitrange= "31:31" />
<field name= "CURRENT" desc= "" bitrange= "30:28" >
<value name= "CURRENT_50mA" value= "0x0" desc= "" />
<value name= "CURRENT_100mA" value= "0x1" desc= "" />
<value name= "CURRENT_150mA" value= "0x2" desc= "" />
<value name= "CURRENT_200mA" value= "0x3" desc= "" />
<value name= "CURRENT_250mA" value= "0x4" desc= "" />
<value name= "CURRENT_300mA" value= "0x5" desc= "" />
<value name= "CURRENT_400mA" value= "0x6" desc= "" />
<value name= "CURRENT_500mA" value= "0x7" desc= "" />
</field>
<field name= "STAT" desc= "" bitrange= "27:27" >
<value name= "DISCHARGING" value= "0x0" desc= "" />
<value name= "CHARGING" value= "0x1" desc= "" />
</field>
<field name= "CHGPHASE" desc= "" bitrange= "26:25" >
<value name= "RESERVED" value= "0x0" desc= "" />
<value name= "PRECHARGE" value= "0x1" desc= "" />
<value name= "CC" value= "0x2" desc= "" />
<value name= "CV" value= "0x3" desc= "" />
</field>
<field name= "RESERVED24_16" desc= "" bitrange= "24:16" />
<field name= "PBLS" desc= "" bitrange= "15:15" />
<field name= "PPHS" desc= "" bitrange= "14:14" />
<field name= "RESERVED13" desc= "" bitrange= "13:13" />
<field name= "PDUT" desc= "" bitrange= "12:8" />
<field name= "RESERVED7" desc= "" bitrange= "7:7" />
<field name= "BLV0" desc= "" bitrange= "6:6" />
<field name= "TMPSET" desc= "" bitrange= "5:4" >
<value name= "TEMP_40C" value= "0x0" desc= "" />
<value name= "TEMP_45C" value= "0x1" desc= "" />
<value name= "TEMP_50C" value= "0x2" desc= "" />
<value name= "TEMP_55C" value= "0x3" desc= "" />
</field>
<field name= "LBNMIVS" desc= "" bitrange= "3:2" >
<value name= "VOLTAGE_2_9" value= "0x0" desc= "" />
<value name= "VOLTAGE_3_1" value= "0x1" desc= "" />
<value name= "VOLTAGE_3_3" value= "0x2" desc= "" />
<value name= "VOLTAGE_3_5" value= "0x3" desc= "" />
</field>
<field name= "LBRVS" desc= "" bitrange= "1:0" >
<value name= "VOLTAGE_2_7" value= "0x0" desc= "" />
<value name= "VOLTAGE_2_9" value= "0x1" desc= "" />
<value name= "VOLTAGE_3_1" value= "0x2" desc= "" />
<value name= "VOLTAGE_3_3" value= "0x3" desc= "" />
</field>
2014-11-06 09:31:11 +00:00
</reg>
</dev>
<dev name= "RTCWDT" long_name= "Real Time Clock, Timers and Watchdog" desc= "" version= "1.0" >
<addr name= "RTC" addr= "0xb0018000" />
<reg name= "CTL" desc= "" >
<addr name= "CTL" addr= "0x0" />
</reg>
<reg name= "DHMS" desc= "" >
<addr name= "DHMS" addr= "0x4" />
2014-11-18 22:29:51 +00:00
<field name= "RESERVED31_27" desc= "" bitrange= "31:27" />
<field name= "DAY" desc= "" bitrange= "26:24" />
<field name= "RESERVED23_21" desc= "" bitrange= "23:21" />
<field name= "HOUR" desc= "" bitrange= "20:16" />
<field name= "RESERVED15_14" desc= "" bitrange= "15:14" />
<field name= "MIN" desc= "" bitrange= "13:8" />
<field name= "RESERVED7_6" desc= "" bitrange= "7:6" />
<field name= "SEC" desc= "" bitrange= "5:0" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "YMD" desc= "" >
<addr name= "YMD" addr= "0x8" />
2014-11-18 22:29:51 +00:00
<field name= "RESERVED31" desc= "" bitrange= "31:31" />
<field name= "CENT" desc= "" bitrange= "30:24" />
<field name= "RESERVED23" desc= "" bitrange= "23:23" />
<field name= "YEAR" desc= "" bitrange= "22:16" />
<field name= "RESERVED15_12" desc= "" bitrange= "15:12" />
<field name= "MON" desc= "" bitrange= "11:8" />
<field name= "RESERVED7_5" desc= "" bitrange= "7:5" />
<field name= "DATE" desc= "" bitrange= "4:0" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "DHMSALM" desc= "" >
<addr name= "DHMSALM" addr= "0xc" />
2014-11-18 22:29:51 +00:00
<field name= "RESERVED31_21" desc= "" bitrange= "31:21" />
<field name= "HOURAL" desc= "" bitrange= "20:16" />
<field name= "RESERVED15_14" desc= "" bitrange= "15:14" />
<field name= "MINAL" desc= "" bitrange= "13:8" />
<field name= "RESERVED7_6" desc= "" bitrange= "7:6" />
<field name= "SECAL" desc= "" bitrange= "5:0" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "YMDALM" desc= "" >
<addr name= "YMDALM" addr= "0x10" />
2014-11-18 22:29:51 +00:00
<field name= "RESERVED31_23" desc= "" bitrange= "31:23" />
<field name= "YEARAL" desc= "" bitrange= "22:16" />
<field name= "RESERVED15_12" desc= "" bitrange= "15:12" />
<field name= "MONAL" desc= "" bitrange= "11:8" />
<field name= "RESERVED7_5" desc= "" bitrange= "7:5" />
<field name= "DATEAL" desc= "" bitrange= "4:0" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "WDCTL" desc= "" >
<addr name= "WDCTL" addr= "0x14" />
</reg>
<reg name= "TxCTL" desc= "" >
<addr name= "T0CTL" addr= "0x18" />
<addr name= "T1CTL" addr= "0x20" />
</reg>
<reg name= "Tx" desc= "" >
<addr name= "T0" addr= "0x1c" />
<addr name= "T1" addr= "0x24" />
</reg>
</dev>
<dev name= "SD" long_name= "SD/MMC Interface" desc= "" version= "" >
<addr name= "SD" addr= "0xb00b0000" />
<reg name= "CTL" desc= "" >
<addr name= "CTL" addr= "0x0" />
</reg>
<reg name= "CMDRSP" desc= "" >
<addr name= "CMDRSP" addr= "0x4" />
</reg>
<reg name= "RW" desc= "" >
<addr name= "RW" addr= "0x8" />
</reg>
<reg name= "FIFOCTL" desc= "" >
<addr name= "FIFOCTL" addr= "0xc" />
</reg>
<reg name= "CMD" desc= "" >
<addr name= "CMD" addr= "0x10" />
</reg>
<reg name= "ARG" desc= "" >
<addr name= "ARG" addr= "0x14" />
</reg>
<reg name= "CRC7" desc= "" >
<addr name= "CRC7" addr= "0x18" />
</reg>
<reg name= "RSPBUFx" desc= "" >
<addr name= "RSPBUF0" addr= "0x1c" />
<addr name= "RSPBUF1" addr= "0x20" />
<addr name= "RSPBUF2" addr= "0x24" />
<addr name= "RSPBUF3" addr= "0x28" />
<addr name= "RSPBUF4" addr= "0x2c" />
</reg>
<reg name= "DAT" desc= "" >
<addr name= "DAT" addr= "0x30" />
</reg>
<reg name= "CLK" desc= "" >
<addr name= "CLK" addr= "0x34" />
</reg>
<reg name= "BYTECNT" desc= "" >
<addr name= "BYTECNT" addr= "0x38" />
</reg>
</dev>
<dev name= "SDR" long_name= "SDRAM Interface" desc= "" version= "1.0" >
<addr name= "SDR" addr= "0xb0070000" />
<reg name= "CTL" desc= "" >
<addr name= "CTL" addr= "0x0" />
</reg>
<reg name= "ADDRCFG" desc= "" >
<addr name= "ADDRCFG" addr= "0x4" />
</reg>
<reg name= "EN" desc= "" >
<addr name= "EN" addr= "0x8" />
2014-11-27 23:18:02 +00:00
<field name= "RESERVED31_1" desc= "" bitrange= "31:1" />
<field name= "EN" desc= "" bitrange= "0:0" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "CMD" desc= "" >
<addr name= "CMD" addr= "0xc" />
</reg>
<reg name= "STAT" desc= "" >
<addr name= "STAT" addr= "0x10" />
</reg>
<reg name= "RFSH" desc= "" >
<addr name= "RFSH" addr= "0x14" />
</reg>
<reg name= "MODE" desc= "" >
<addr name= "MODE" addr= "0x18" />
</reg>
<reg name= "MOBILE" desc= "" >
<addr name= "MOBILE" addr= "0x1c" />
</reg>
</dev>
<dev name= "SPDIF" long_name= "Sony Philips Digital Interface" desc= "" version= "1.0" >
<addr name= "SPDIF" addr= "0xb0140000" />
</dev>
<dev name= "SPI" long_name= "" desc= "" version= "1.0" >
<addr name= "SPI" addr= "0xb0190000" />
</dev>
<dev name= "SRAMOC" long_name= "SRAM on Chip" desc= "" version= "1.0" >
<addr name= "SRAMOC" addr= "0xb0030000" />
<reg name= "CTL" desc= "" >
<addr name= "CTL" addr= "0x0" />
</reg>
<reg name= "STAT" desc= "" >
<addr name= "STAT" addr= "0x4" />
</reg>
</dev>
<dev name= "TP" long_name= "" desc= "" version= "1.0" >
<addr name= "TP" addr= "0xb0120000" />
</dev>
<dev name= "UART" long_name= "" desc= "" version= "1.0" >
<addr name= "UART0" addr= "0xb0160000" />
<addr name= "UART1" addr= "0xb0160020" />
</dev>
<dev name= "UDC" long_name= "Usb Device Controller" desc= "CAST cusb2-otg IP core" version= "1.0" >
<addr name= "UDC" addr= "0xb00e0000" />
<reg name= "EP0BC" desc= "ep0 byte count register" >
<addr name= "OUT0BC" addr= "0x0" />
<addr name= "IN0BC" addr= "0x1" />
<field name= "RESERVED" desc= "" bitrange= "31:8" />
<field name= "BC" desc= "" bitrange= "7:0" />
</reg>
<reg name= "EP0CS" desc= "" >
<addr name= "EP0CS" addr= "0x2" />
<field name= "RESERVED" desc= "" bitrange= "31:8" />
<field name= "OUT_BUSY" desc= "" bitrange= "3:3" />
<field name= "IN_BUSY" desc= "" bitrange= "2:2" />
<field name= "NAK" desc= "Writing 1 clears" bitrange= "1:1" />
<field name= "STALL" desc= "" bitrange= "0:0" />
</reg>
<reg name= "BCL" desc= "Endpoint byte count LSB register" >
<addr name= "OUT1BCL" addr= "0x8" />
<addr name= "IN1BCL" addr= "0xc" />
<addr name= "OUT2BCL" addr= "0x10" />
<addr name= "IN2BCL" addr= "0x14" />
</reg>
<reg name= "BCH" desc= "Endpoint byte count MSB" >
<addr name= "OUT1BCH" addr= "0x9" />
<addr name= "IN1BCH" addr= "0xd" />
<addr name= "OUT2BCH" addr= "0x11" />
<addr name= "IN2BCH" addr= "0x15" />
</reg>
<reg name= "CON" desc= "Endpoint configuration register" >
<addr name= "OUT1CON" addr= "0xa" />
<addr name= "IN1CON" addr= "0xe" />
<addr name= "OUT2CON" addr= "0x12" />
<addr name= "IN2CON" addr= "0x16" />
<field name= "EP_ENABLE" desc= "" bitrange= "7:7" />
<field name= "STALL" desc= "" bitrange= "6:6" />
<field name= "EP_TYPE" desc= "" bitrange= "3:2" >
<value name= "RESERVED" value= "0x0" desc= "" />
<value name= "ISOCHRONOUS" value= "0x1" desc= "" />
<value name= "BULK" value= "0x2" desc= "" />
<value name= "INTERRUPT" value= "0x3" desc= "" />
</field>
<field name= "SUBFIFOS" desc= "" bitrange= "1:0" >
<value name= "SINGLE" value= "0x0" desc= "" />
<value name= "DOUBLE" value= "0x1" desc= "" />
<value name= "TRIPLE" value= "0x2" desc= "" />
<value name= "QUAD" value= "0x3" desc= "" />
</field>
</reg>
<reg name= "CS" desc= "Endpoint status register" >
<addr name= "OUT1CS" addr= "0xb" />
<addr name= "IN1CS" addr= "0xf" />
<addr name= "OUT2CS" addr= "0x13" />
<addr name= "IN2CS" addr= "0x17" />
<field name= "AUTO" desc= "" bitrange= "4:4" />
<field name= "NPACK1" desc= "" bitrange= "3:3" />
<field name= "NPACK0" desc= "" bitrange= "2:2" />
<field name= "BUSY" desc= "" bitrange= "1:1" />
<field name= "ERROR" desc= "" bitrange= "0:0" />
</reg>
<reg name= "FIFODAT" desc= "Endpoint FIFO" >
<addr name= "FIFO1DAT" addr= "0x84" />
<addr name= "FIFO2DAT" addr= "0x88" />
</reg>
<reg name= "EP0DAT" desc= "Endpoint 0 buffers each 64 bytes long." >
<addr name= "EP0INDAT" addr= "0x100" />
<addr name= "EP0OUTDAT" addr= "0x140" />
</reg>
<reg name= "SETUPDAT" desc= "SETUP packet buffer" >
<addr name= "SETUPDAT" addr= "0x180" />
</reg>
<reg name= "EPIRQ" desc= "Endpoint irq flag register" >
<addr name= "IN04IRQ" addr= "0x188" />
<addr name= "OUT04IRQ" addr= "0x18a" />
<field name= "EP_NUM" desc= "" bitrange= "2:0" />
</reg>
<reg name= "USBIRQ" desc= "General usb core irq flags" >
<addr name= "USBIRQ" addr= "0x18c" />
<field name= "HS" desc= "Enter high speed operation. Set by core on connection." bitrange= "5:5" />
<field name= "RESET" desc= "Asserted on usb reset." bitrange= "4:4" />
<field name= "SUSPEND" desc= "" bitrange= "3:3" />
<field name= "SETUP_TOKEN" desc= "" bitrange= "2:2" />
<field name= "SOF" desc= "" bitrange= "1:1" />
<field name= "SETUP_DATA" desc= "Setup data are ready to be accessed in SETUPDAT buffer." bitrange= "0:0" />
</reg>
<reg name= "EPIEN" desc= "Endpoint interrupt enable register" >
<addr name= "IN04IEN" addr= "0x194" />
<addr name= "OUT04IEN" addr= "0x196" />
<field name= "EP_NUM" desc= "" bitrange= "2:0" />
</reg>
<reg name= "USBIEN" desc= "General usb interrupts enable register" >
<addr name= "USBIEN" addr= "0x198" />
<field name= "HS" desc= "" bitrange= "5:5" />
<field name= "RESET" desc= "" bitrange= "4:4" />
<field name= "SUSPEND" desc= "" bitrange= "3:3" />
<field name= "SETUP_TOKEN" desc= "" bitrange= "2:2" />
<field name= "SOF" desc= "" bitrange= "1:1" />
<field name= "SETUP_DATA" desc= "" bitrange= "0:0" />
</reg>
<reg name= "IVECT" desc= "Interrupt vector register known (guessed) values: 0x00 - SETUP 0x10 - RESET 0x14 - HS 0x28 - EPs 0xD8 - OTG" >
<addr name= "IVECT" addr= "0x1a0" />
</reg>
<reg name= "ENDPRST" desc= "Endpoint reset register" >
<addr name= "ENDPRST" addr= "0x1a2" />
<field name= "FIFO_RESET" desc= "" bitrange= "6:6" />
<field name= "TOGGLE_RESET" desc= "" bitrange= "5:5" />
<field name= "DIR" desc= "" bitrange= "4:4" >
<value name= "OUT" value= "0x0" desc= "" />
<value name= "IN" value= "0x1" desc= "" />
</field>
<field name= "EP_NUM" desc= "" bitrange= "2:0" />
</reg>
<reg name= "USBCS" desc= "" >
<addr name= "USBCS" addr= "0x1a3" />
<field name= "SOFT_CONNECT" desc= "" bitrange= "6:6" />
<field name= "SIGRESUME" desc= "" bitrange= "5:5" />
<field name= "USBSPEED" desc= "" bitrange= "1:1" />
<field name= "HCLSMODE" desc= "" bitrange= "0:0" />
</reg>
<reg name= "FIFOCTRL" desc= "" >
<addr name= "FIFOCTRL" addr= "0x1a8" />
<field name= "CPU_ACCESS" desc= "" bitrange= "7:7" />
2015-01-23 10:03:49 +00:00
<field name= "DMA" desc= "" bitrange= "5:5" />
2014-11-06 09:31:11 +00:00
<field name= "DIR" desc= "" bitrange= "4:4" >
<value name= "OUT" value= "0x0" desc= "" />
<value name= "IN" value= "0x1" desc= "" />
</field>
<field name= "EP_NUM" desc= "" bitrange= "2:0" />
</reg>
<reg name= "OTGIRQ" desc= "" >
<addr name= "OTGIRQ" addr= "0x1bc" />
<field name= "PERIPH" desc= "" bitrange= "4:4" />
<field name= "VBUSERR" desc= "" bitrange= "3:3" />
<field name= "LOCSOFT" desc= "" bitrange= "2:2" />
<field name= "SPRDET" desc= "" bitrange= "1:1" />
<field name= "OTG_IDLE" desc= "" bitrange= "0:0" />
</reg>
<reg name= "OTGSTATUS" desc= "" >
<addr name= "OTGSTATUS" addr= "0x1bf" />
</reg>
<reg name= "OTGIEN" desc= "OTG interrupt enable register" >
<addr name= "OTGIEN" addr= "0x1c0" />
</reg>
<reg name= "HCMAXPCKL" desc= "High speed max packed size LSB" >
<addr name= "HCIN1MAXPCKL" addr= "0x1e2" />
<addr name= "HCOUT2MAXPCKL" addr= "0x3e4" />
</reg>
<reg name= "STADDR" desc= "Endpoint buffer start address" >
2015-01-22 12:33:35 +00:00
<addr name= "OUT1STADDR" addr= "0x304" />
<addr name= "IN2STADDR" addr= "0x348" />
2014-11-06 09:31:11 +00:00
</reg>
<reg name= "USBEIRQ" desc= "USB extended irq register" >
<addr name= "USBEIRQ" addr= "0x400" />
<field name= "USB" desc= "" bitrange= "7:7" />
<field name= "WAKEUP" desc= "" bitrange= "6:6" />
<field name= "RESUME" desc= "" bitrange= "5:5" />
<field name= "CONDISCON" desc= "" bitrange= "4:4" />
<field name= "USBIEN" desc= "" bitrange= "3:3" />
<field name= "WAKEUPIEN" desc= "" bitrange= "2:2" />
<field name= "RESUMEIEN" desc= "" bitrange= "1:1" />
<field name= "CONDISCONIEN" desc= "" bitrange= "0:0" />
</reg>
<reg name= "USBERST" desc= "" >
<addr name= "USBERST" addr= "0x404" />
</reg>
<reg name= "DMAEPSEL" desc= "" >
<addr name= "DMAEPSEL" addr= "0x40c" />
<field name= "EP_SEL" desc= "" bitrange= "31:0" >
<value name= "UNKNOWN" value= "0x0" desc= "" />
<value name= "EP1_IN" value= "0x1" desc= "" />
<value name= "EP1_OUT" value= "0x3" desc= "" />
<value name= "EP2_IN" value= "0x4" desc= "" />
<value name= "EP2_OUT" value= "0xc" desc= "" />
</field>
</reg>
</dev>
<dev name= "YUV2RGB" long_name= "Color Space Conversion Accelerator" desc= "" version= "" >
<addr name= "YUV2RGB" addr= "0xb00f0000" />
<reg name= "CTL" desc= "" >
<addr name= "CTL" addr= "0x0" />
<field name= "RESERVED" desc= "" bitrange= "31:22" />
<field name= "RFBM" desc= "Read fifo block mode." bitrange= "21:21" />
<field name= "WFBM" desc= "Write fifo block mode" bitrange= "20:20" />
<field name= "EN" desc= "RGB Decoder enable." bitrange= "19:19" />
<field name= "FES" desc= "Fifo empty status." bitrange= "18:18" />
<field name= "WDCS" desc= "Write Data/Command Select" bitrange= "17:16" >
<value name= "CMD" value= "0x0" desc= "Write LCD register address" />
<value name= "DATA" value= "0x1" desc= "Write LCD register data" />
<value name= "RGB" value= "0x2" desc= "RGB565 Data FrameBuffer Transfer" />
<value name= "YUV" value= "0x3" desc= "YCbCr/YUV Data FrameBuffer Transfer" />
</field>
<field name= "DEST" desc= "RGB Decoder Destination." bitrange= "15:15" />
<field name= "FORMATS" desc= "RGB Format" bitrange= "13:11" >
<value name= "RGB565_1" value= "0x0" desc= "16bit (RGB 565 1transfer)" />
<value name= "RGB666_1" value= "0x1" desc= "18bit (RGB 666 1transfer)" />
<value name= "RGB565_2" value= "0x2" desc= "8bit (RGB 565 2transfers)" />
<value name= "RGB666_2" value= "0x3" desc= "9bit (RGB 666 2transfers)" />
<value name= "RGB888_3" value= "0x4" desc= "8bit (RGB 888 3transfers)" />
<value name= "RGB666_3" value= "0x5" desc= "6bit (RGB 666 3transfers)" />
</field>
<field name= "SEQ" desc= "RGB Sequence" bitrange= "10:10" >
<value name= "RGB" value= "0x0" desc= "" />
<value name= "BGR" value= "0x1" desc= "" />
</field>
<field name= "FWCS" desc= "FIFO write channel select." bitrange= "9:9" >
<value name= "SPECIAL" value= "0x0" desc= "" />
<value name= "AHB" value= "0x1" desc= "" />
</field>
<field name= "FRCS" desc= "FIFO read channel select" bitrange= "8:8" >
<value name= "SPECIAL" value= "0x0" desc= "" />
<value name= "AHB" value= "0x1" desc= "" />
</field>
<field name= "EMDE" desc= "FIFO Empty (Write) DRQ Enable." bitrange= "7:7" />
<field name= "EMIE" desc= "FIFO Empty (Write) IRQ Enable." bitrange= "6:6" />
<field name= "FUDE" desc= "FIFO Full (Read) DRQ Enable." bitrange= "5:5" />
<field name= "FUIE" desc= "FIFO Full (Read) IRQ Enable." bitrange= "4:4" />
<field name= "EMCO" desc= "FIFO Empty (Write) Condition." bitrange= "3:3" >
<value name= "EMPTY_4_8" value= "0x0" desc= "" />
<value name= "EMPTY_0_8" value= "0x1" desc= "" />
</field>
<field name= "EMIP" desc= "FIFO Empty (Write) IRQ Pending Bit." bitrange= "2:2" />
<field name= "FUIP" desc= "FIFO Full (Read) IRQ Pending Bit." bitrange= "1:1" />
<field name= "ERP" desc= "FIFO Error Pending Bit. Write 1 to the bit to clear it and reset the FIFO." bitrange= "0:0" />
</reg>
<reg name= "FIFODATA" desc= "" >
<addr name= "FIFODATA" addr= "0x4" />
</reg>
<reg name= "CLKCTL" desc= "" >
<addr name= "CLKCTL" addr= "0x8" />
</reg>
<reg name= "FRAMECOUNT" desc= "" >
<addr name= "FRAMECOUNT" addr= "0xc" />
</reg>
</dev>
</soc>
