rockbox/firmware/export/config/iriverh100.h

220 lines
6.3 KiB
C
Raw Normal View History

/*
* This config file is for iriver iHP-100, iHP-110, iHP-115
*/
#define IRIVER_H100_SERIES 1
#define MODEL_NAME "iriver iHP-100 series"
/* For Rolo and boot loader */
#define MODEL_NUMBER 1
/* define this if you use an ATA controller */
#define CONFIG_STORAGE STORAGE_ATA
/*define this if the ATA controller and method of USB access support LBA48 */
#define HAVE_LBA48
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 160
#define LCD_HEIGHT 128
/* sqrt(160^2 + 128^2) / 1.9 = 107.8 */
#define LCD_DPI 108
#define LCD_DEPTH 2
#define LCD_PIXELFORMAT VERTICAL_PACKING
/* Display colours, for screenshots and sim (0xRRGGBB) */
#define LCD_DARKCOLOR 0x000000
#define LCD_BRIGHTCOLOR 0x5a915a
#define LCD_BL_DARKCOLOR 0x000000
#define LCD_BL_BRIGHTCOLOR 0xadd8e6
/* remote LCD */
#define LCD_REMOTE_WIDTH 128
#define LCD_REMOTE_HEIGHT 64
#define LCD_REMOTE_DEPTH 1
#define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
/* Remote display colours, for screenshots and sim (0xRRGGBB) */
#define LCD_REMOTE_DARKCOLOR 0x000000
#define LCD_REMOTE_BRIGHTCOLOR 0x5a915a
#define LCD_REMOTE_BL_DARKCOLOR 0x000000
#define LCD_REMOTE_BL_BRIGHTCOLOR 0x82b4fa
#define CONFIG_KEYPAD IRIVER_H100_PAD
#define CONFIG_REMOTE_KEYPAD H100_REMOTE
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* Define this if you have an remote lcd */
#define HAVE_REMOTE_LCD
/* Define if we have a hardware defect that causes ticking on the audio line */
#define HAVE_REMOTE_LCD_TICKING
#define CONFIG_LCD LCD_S1D15E06
/* define this if you have a disk storage, i.e. something
that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
/* We can fade the backlight by using PWM */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
#define AB_REPEAT_ENABLE
#define CONFIG_TUNER TEA5767
#define CONFIG_TUNER_XTAL 32768
#define HAVE_UDA1380
/* define this if you have recording possibility */
#define HAVE_RECORDING
/* define hardware samples rate caps mask */
#define HW_SAMPR_CAPS (/*SAMPR_CAP_88 |*/ SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
#define HAVE_AGC
#define HAVE_HISTOGRAM
#define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Hardware controlled charging */
#define CONFIG_CHARGING CHARGING_SIMPLE
/* define current usage levels */
#define CURRENT_NORMAL 80 /* 16h playback on 1300mAh battery */
#define CURRENT_BACKLIGHT 23 /* from IriverBattery wiki page */
#define CURRENT_SPDIF_OUT 10 /* optical SPDIF output on */
#define CURRENT_RECORD 105 /* additional current while recording */
#define CURRENT_REMOTE 8 /* additional current when remote connected */
/* Define this if you have a Motorola SCF5249 */
#define CONFIG_CPU MCF5249
/* Define this if you want to use coldfire's i2c interface */
#define CONFIG_I2C I2C_COLDFIRE
/* Define this if you can run rockbox from flash memory */
/* In theory we can, but somebody needs to verify there are no issues. */
#define HAVE_FLASHED_ROCKBOX
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* The size of the flash ROM */
#define FLASH_SIZE 0x200000
/* Define this to the CPU frequency */
#define CPU_FREQ 11289600
/* Define this if you have ATA power-off control */
#define HAVE_ATA_POWER_OFF
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
#define HAVE_ATA_LED_CTRL
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define BOOTFILE_EXT "iriver"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define FLASH_BASE 0x00000000
#define BOOTLOADER_ENTRYPOINT 0x001F0000
#define FLASH_RAMIMAGE_ENTRY 0x00001000
#define FLASH_ROMIMAGE_ENTRY 0x00100000
#define FLASH_MAGIC 0xfbfbfbf2
/* Define this if there is an EEPROM chip */
#define HAVE_EEPROM
/* Define this if the EEPROM chip is used */
#define HAVE_EEPROM_SETTINGS
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | \
SRC_CAP_FMRADIO | SRC_CAP_SPDIF)
/* Define this for S/PDIF output available */
#define HAVE_SPDIF_OUT
/* Define this if you can control the S/PDIF power */
#define HAVE_SPDIF_POWER
#define SPDIF_POWER_INVERTED
/* Define this for FM radio input available */
#define HAVE_FMRADIO_IN
/** Port-specific settings **/
#define HAVE_LCD_CONTRAST
/* Main LCD backlight brightness range and defaults */
#define MIN_CONTRAST_SETTING 14 /* White screen a bit higher than this */
#define MAX_CONTRAST_SETTING 63 /* Black screen a bit lower than this */
#define DEFAULT_CONTRAST_SETTING 27
/* Remote LCD contrast range and defaults */
#define MIN_REMOTE_CONTRAST_SETTING 5
#define MAX_REMOTE_CONTRAST_SETTING 63
#define DEFAULT_REMOTE_CONTRAST_SETTING 42
#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY