rockbox/firmware/target/mips/ingenic_jz47xx/crt0.S

271 lines
7.1 KiB
ArmAsm
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 by Maurus Cuelenaere
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
/*
* init.S
*
* Initialization code for JzRISC.
*
* Author: Seeger Chin
* e-mail: seeger.chin@gmail.com
*
* Copyright (C) 2006 Ingenic Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include "config.h"
#include "mips.h"
.text
.set mips3
.extern system_main
.global _start
.section .init.text
.set noreorder
.set noat
#ifdef BOOTLOADER
.word 0 /* HACK */
.word 0 /* HACK */
#endif
_start:
la ra, _start
//----------------------------------------------------
// init cp0 registers.
//----------------------------------------------------
mtc0 zero, C0_WATCHLO
mtc0 zero, C0_WATCHHI
li t0, (M_StatusBEV | M_StatusIM7 | M_StatusIM6 \
| M_StatusIM5 | M_StatusIM4 | M_StatusIM3 \
| M_StatusIM2 | M_StatusERL)
// BEV = Enable Boot Exception Vectors
// IMx = Interrupt mask
// ERL = Denotes error level
mtc0 t0, C0_STATUS
li t1, M_CauseIV
mtc0 t1, C0_CAUSE
//----------------------------------------------------
// init caches, assumes a 4way*128set*32byte i/d cache
//----------------------------------------------------
li t0, 3 // enable cache for kseg0 accesses
mtc0 t0, C0_CONFIG // CONFIG reg
la t0, 0x80000000 // an idx op should use a unmappable address
ori t1, t0, 0x4000 // 16kB cache
mtc0 zero, C0_TAGLO // TAGLO reg
mtc0 zero, C0_TAGHI // TAGHI reg
_init_cache_loop:
cache 0x8, 0(t0) // index store icache tag
cache 0x9, 0(t0) // index store dcache tag
bne t0, t1, _init_cache_loop
addiu t0, t0, 0x20 // 32 bytes per cache line
nop
//----------------------------------------------------
// Invalidate BTB
//----------------------------------------------------
mfc0 t0, C0_CONFIG
nop
ori t0, 2
mtc0 t0, C0_CONFIG
nop
//----------------------------------------------------
// clear BSS section
//----------------------------------------------------
la t0, _edata
la t1, _end
_init_bss_loop:
sw zero, 0(t0)
bne t0, t1, _init_bss_loop
addiu t0, 4
//----------------------------------------------------
// setup stack, jump to C code
//----------------------------------------------------
la sp, stackend
la t0, stackbegin
li t1, 0xDEADBEEF
_init_stack_loop:
sw t1, 0(t0)
bne t0, sp, _init_stack_loop
addiu t0, t0, 4
la t0, system_main
jr t0
nop
.section .vectors, "ax", %progbits
.extern real_exception_handler
.global except_common_entry
.type except_common_entry,@function
except_common_entry:
la k0, real_exception_handler
jr k0
nop
nop
nop
.extern _int
.extern _exception
.global real_exception_handler
.type real_exception_handler,@function
.set noreorder
real_exception_handler:
addiu sp, -0x80
sw ra, 0(sp)
sw fp, 4(sp)
sw gp, 8(sp)
sw t9, 0xC(sp)
sw t8, 0x10(sp)
sw s7, 0x14(sp)
sw s6, 0x18(sp)
sw s5, 0x1C(sp)
sw s4, 0x20(sp)
sw s3, 0x24(sp)
sw s2, 0x28(sp)
sw s1, 0x2C(sp)
sw s0, 0x30(sp)
sw t7, 0x34(sp)
sw t6, 0x38(sp)
sw t5, 0x3C(sp)
sw t4, 0x40(sp)
sw t3, 0x44(sp)
sw t2, 0x48(sp)
sw t1, 0x4C(sp)
sw t0, 0x50(sp)
sw a3, 0x54(sp)
sw a2, 0x58(sp)
sw a1, 0x5C(sp)
sw a0, 0x60(sp)
sw v1, 0x64(sp)
sw v0, 0x68(sp)
sw $1, 0x6C(sp)
mflo t0 # Move From LO
nop
sw t0, 0x70(sp)
mfhi t0 # Move From HI
nop
sw t0, 0x74(sp)
mfc0 t0, C0_STATUS # Status register
sll zero, 1
sll zero, 1
sll zero, 1
sll zero, 1
sw t0, 0x78(sp)
mfc0 t0, C0_EPC # Exception Program Counter
sll zero, 1
sll zero, 1
sll zero, 1
sll zero, 1
sw t0, 0x7C(sp)
li k1, 0x7C
mfc0 k0, C0_CAUSE # C0_CAUSE of last exception
and k0, k1
beq zero, k0, _int
nop
la k0, _exception
jr k0
nop
.global _int
.type _int,@function
_int:
jal intr_handler
nop
lw ra, 0(sp)
lw fp, 4(sp)
sw gp, 8(sp)
lw t9, 0xC(sp)
lw t8, 0x10(sp)
lw s7, 0x14(sp)
lw s6, 0x18(sp)
lw s5, 0x1C(sp)
lw s4, 0x20(sp)
lw s3, 0x24(sp)
lw s2, 0x28(sp)
lw s1, 0x2C(sp)
lw s0, 0x30(sp)
lw t7, 0x34(sp)
lw t6, 0x38(sp)
lw t5, 0x3C(sp)
lw t4, 0x40(sp)
lw t3, 0x44(sp)
lw t2, 0x48(sp)
lw t1, 0x4C(sp)
lw t0, 0x50(sp)
lw a3, 0x54(sp)
lw a2, 0x58(sp)
lw a1, 0x5C(sp)
lw a0, 0x60(sp)
lw v1, 0x64(sp)
lw v0, 0x68(sp)
lw v1, 0x6C(sp)
lw k0, 0x70(sp)
mtlo k0 # Move To LO
nop
lw k0, 0x74(sp)
mthi k0 # Move To HI
nop
lw k0, 0x78(sp)
nop
mtc0 k0, C0_STATUS # Status register
sll zero, 1
sll zero, 1
sll zero, 1
sll zero, 1
lw k0, 0x7C(sp)
nop
mtc0 k0, C0_EPC # Exception Program Counter
sll zero, 1
sll zero, 1
sll zero, 1
sll zero, 1
addiu sp, 0x80
eret # Exception Return
nop
.extern _exception_handler
.global _exception
.type _exception,@function
_exception:
move a0, sp
mfc0 a1, C0_CAUSE # C0_CAUSE of last exception
mfc0 a2, C0_EPC # Exception Program Counter
la k0, exception_handler
jr k0
nop
.set reorder