rockbox/firmware/export/config-player.h

/* define this if you have a charcell LCD display */
#define HAVE_LCD_CHARCELLS

/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE

#define LCD_WIDTH  11
#define LCD_HEIGHT  2
#define LCD_DEPTH   1
#define SIM_LCD_WIDTH  132 /* pixels */
#define SIM_LCD_HEIGHT  64 /* pixels */

/* define this if you have the Player's keyboard */
#define CONFIG_KEYPAD PLAYER_PAD

/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x8000

#define AB_REPEAT_ENABLE 1

/* Define this if you have a MAS3507D */
#define CONFIG_CODEC MAS3507D

/* Define this if you have a DAC3550A */
#define HAVE_DAC3550A

/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT

#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50   /* capacity increment */
#define BATTERY_TYPES_COUNT  1    /* only one type */

/* define this if the unit should not shut down on low battery. */
#define NO_LOW_BATTERY_SHUTDOWN

/* Hardware controlled charging */
#define CONFIG_CHARGING CHARGING_SIMPLE

#ifndef SIMULATOR

/* Define this if you have a SH7034 */
#define CONFIG_CPU SH7034

/* Uncomment this if you want to enable ATA power-off control.
 * Attention, some players crash when ATA power-off is enabled! */
//#define HAVE_ATA_POWER_OFF

/* Define this if you control ata power player style
   (with PB4, new player only) */
#define ATA_POWER_PLAYERSTYLE

/* Define this to the CPU frequency */
#define CPU_FREQ 12000000 /* cycle time ~83.3ns */

/* Define this if you must discharge the data line by driving it low
   and then set it to input to see if it stays low or goes high */
#define HAVE_I2C_LOW_FIRST

#define CONFIG_I2C I2C_PLAYREC

/* Offset ( in the firmware file's header ) to the file length */
#define FIRMWARE_OFFSET_FILE_LENGTH 0

/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 4

/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 6

/* The start address index for ROM builds */
/* #define ROM_START 0xD010 for behind original Archos */
#define ROM_START 0x6010 /* for behind BootBox */

/* Software controlled LED */
#define CONFIG_LED LED_REAL

#define CONFIG_LCD LCD_SSD1801

#define BOOTFILE_EXT "mod"
#define BOOTFILE "archos." BOOTFILE_EXT
#define BOOTDIR "/"

#endif /* SIMULATOR */

#define HAVE_LCD_CONTRAST

#define MIN_CONTRAST_SETTING        5
#define MAX_CONTRAST_SETTING        31
#define DEFAULT_CONTRAST_SETTING    30