..
adc.h
as3514.h
get rid of audiohw_reset
2007-11-20 10:28:53 +00:00
ata.h
ata_idle_notify.h
ata_mmc.h
Accept FS#7134 - Sansa: external sd card support by Antonius Hellmann with some tweaks. All testers have given the green light. (Now for the RED ?? ;).
2007-06-30 02:08:27 +00:00
audio.h
Make sure initial menu item is voiced at startup. Voice thread must wait for the audio thread to finish initializing hardware. A known issue at speex commit time (perhaps only by myself ;). The behavioral refinement time begins.
2007-11-19 11:59:52 +00:00
audiohw.h
Initial Cowon D2 commit:
2008-01-14 22:04:48 +00:00
backlight.h
Allow (almost) arbitrary backlight fade in and fade out times (on targets with software PWM fading), and comvert the associated settings to table settings. * Settings system: Unify a bunch of formatters and getlang helpers.
2007-11-26 23:10:20 +00:00
bidi.h
bitswap.h
buffer.h
button.h
FS#7738 - Scroll wheel acceleration for iPod
2007-11-19 11:05:54 +00:00
config-c200.h
New USB stack
2007-11-22 20:51:00 +00:00
config-cowond2.h
Initial Cowon D2 commit:
2008-01-14 22:04:48 +00:00
config-e200.h
New USB stack
2007-11-22 20:51:00 +00:00
config-fmrecorder.h
Move a few #defines to target specific config files
2007-11-18 13:33:27 +00:00
config-gigabeat-s.h
* Make the Gigabeat S bootloader a bit more interesting: it looks for the first firmware file it finds on the second partition and attempts to load it. Loading fails to get past the splash screen though.
2007-11-27 15:40:29 +00:00
config-gigabeat.h
enable ab-repeat for gigabeat
2007-12-01 19:04:26 +00:00
config-h10.h
New USB stack
2007-11-22 20:51:00 +00:00
config-h10_5gb.h
New USB stack
2007-11-22 20:51:00 +00:00
config-h100.h
Oops forgot a few
2007-11-18 13:41:39 +00:00
config-h120.h
Oops forgot a few
2007-11-18 13:41:39 +00:00
config-h300.h
Album art support. Based on FS#3045, but heavily modified to adapt to MoB and for cleanness.
2007-11-11 12:29:37 +00:00
config-iaudiom5.h
Album art support. Based on FS#3045, but heavily modified to adapt to MoB and for cleanness.
2007-11-11 12:29:37 +00:00
config-iaudiox5.h
Album art support. Based on FS#3045, but heavily modified to adapt to MoB and for cleanness.
2007-11-11 12:29:37 +00:00
config-ifp7xx.h
Oops forgot a few
2007-11-18 13:41:39 +00:00
config-ipod1g2g.h
Oops forgot a few
2007-11-18 13:41:39 +00:00
config-ipod3g.h
Delay reading the first battery level for at least 1 tick. Seems to fix the low battery shutdown problem on 3g. Reenable the low battery shutdown on 3g.
2007-11-30 10:55:09 +00:00
config-ipod4g.h
Enable usbstack on ipods.
2007-11-23 09:58:47 +00:00
config-ipodcolor.h
Enable usbstack on ipods.
2007-11-23 09:58:47 +00:00
config-ipodmini.h
Enable usbstack on ipods.
2007-11-23 09:58:47 +00:00
config-ipodmini2g.h
Enable usbstack on ipods.
2007-11-23 09:58:47 +00:00
config-ipodnano.h
Enable usbstack on ipods.
2007-11-23 09:58:47 +00:00
config-ipodvideo.h
Enable usbstack on ipods.
2007-11-23 09:58:47 +00:00
config-logikdax.h
Button driver for Logik DAX, plus some changes to the debug info displayed in the bootloader build.
2007-11-01 23:38:57 +00:00
config-mrobe100.h
- share adc reading code between h10 and mrobe100
2008-01-12 20:36:45 +00:00
config-mrobe500.h
Work in progress fixes to the remote button handling. Now the remote can be unplugged and then plugged in and it will work.
2007-11-15 06:44:35 +00:00
config-ondiofm.h
Move a few #defines to target specific config files
2007-11-18 13:33:27 +00:00
config-ondiosp.h
Move a few #defines to target specific config files
2007-11-18 13:33:27 +00:00
config-player.h
Move a few #defines to target specific config files
2007-11-18 13:33:27 +00:00
config-recorder.h
Move a few #defines to target specific config files
2007-11-18 13:33:27 +00:00
config-recorderv2.h
Move a few #defines to target specific config files
2007-11-18 13:33:27 +00:00
config-tpj1022.h
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
2007-08-17 06:45:18 +00:00
config.h
Initial Cowon D2 commit:
2008-01-14 22:04:48 +00:00
config_caps.h
Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first.
2007-06-08 23:42:04 +00:00
cpu.h
Initial Cowon D2 commit:
2008-01-14 22:04:48 +00:00
debug.h
disk.h
dm320.h
m:robe 500i: Add DSP (C5409) control driver and image loader.
2007-11-20 05:12:05 +00:00
ds2411.h
eeprom_24cxx.h
eeprom_settings.h
enc_base.h
Move encoder CPU boost control to the core. Allow CPU to sleep a bit when PCM buffer is empty and save some power. Codec API becomes incompatible so full updates! :)
2007-11-30 05:16:56 +00:00
fat.h
fmradio.h
fmradio_i2c.h
font.h
Tab police
2007-09-14 16:04:01 +00:00
gdb_api.h
general.h
Add some CACHEALIGN_* macros and a helper function to assist in aligning data and buffers on PortalPlayer processors to cache line boundaries. They're noops when PROC_NEED_CACHEALIGN isn't defined. Go safe and increase the value to 32 since I'm not sure yet if 16 is sufficient - changing that is a one-liner. Add helper to plugin API which will be needed shortly.
2007-11-08 05:17:20 +00:00
generic_i2c.h
hangul.h
hotswap.h
Some rewriting of the e200 ata driver. No more panicing. Faster card multiplexing. Some calculated yielding (further tuneable if needed). Hopefully more reliable in general. Easy revert if rebellious.
2007-07-25 06:15:07 +00:00
hwcompat.h
The iPod Video has the HW version at a different address in ROM.
2007-10-28 01:00:18 +00:00
i2c-coldfire.h
i2c-pp.h
Portal player i2c driver: More struct spinlock phaseout.
2007-11-12 07:58:54 +00:00
i2c.h
i2s.h
Reenable scaling on Sansa since a reasonable solution to clicks has been found.
2007-07-26 10:46:17 +00:00
id3.h
Fix FS#8196 - Gather Runtime Data > User Rating not working
2007-11-22 22:22:54 +00:00
imx31l.h
Gigabeat S now uses the shared ARM MMU code rather than the (mostly duplicated) private code. No functional change.
2007-12-23 03:47:28 +00:00
isp1362.h
kernel.h
Accept FS#7910: spontaneously speak out the battery level when it falls
2007-11-03 05:00:49 +00:00
lcd-charcell.h
lcd-remote.h
Add the viewport functions to the screens API, including a new getfont() function to return the font used by the current viewport. A change to the screens API makes the plugin API incompatible, so we bump version and sort. Also commit the test_viewports plugin (not built by default). This is some more of FS#8385.
2008-01-08 01:22:14 +00:00
lcd.h
Greyscale library: Changed the internal data format once more (separated pixel values and phases), allowing for further optimisation of drawing, scrolling etc. * Optimised grey phase blitting in the core reduces CPU load on all architectures, most significantly on coldfire. Previous version was too slow to keep up at 45MHz, leading to unwanted graininess (update frequency was halved). Also fixed screendump on 2bpp targets with vertical pixel packing.
2008-01-09 23:48:26 +00:00
led.h
logf.h
logf changes:
2007-10-24 22:06:36 +00:00
lv24020lp.h
e200: Tuner driver needs to yield alot and also be mutexed. FM debug screen got broken again and was ignoring cancellation and not drawing the lines.
2007-07-14 22:00:50 +00:00
m5636.h
mas.h
mas35xx.h
move {bass,treble,prescale}_table from sound.c to mas35xx.h
2007-11-15 23:32:56 +00:00
mcf5249.h
mcf5250.h
mp3_playback.h
Accept FS#7264 'Build with -Os switch for coldfire targets'.
2007-06-13 15:35:07 +00:00
mp3data.h
mpeg.h
Accept FS#8053 by Bertrik Sikken: playback.c and mpeg.c simplification by removal of last_track argument in track_(un)buffer callback.
2007-10-31 13:43:50 +00:00
panic.h
pcf50605.h
Try to fix the case where Ipods would spuriously wake up even though no alarm had been set.
2007-09-28 15:09:54 +00:00
pcf50606.h
pcm.h
Unify PCM interface just above the hardware driver level for all targets including the sims. Perform lockout of audio callback when changing states. Weird new playback or recording trouble? Check before and after this revision first though things seem quite sound.
2007-10-06 22:27:27 +00:00
pcm_record.h
Unify PCM interface just above the hardware driver level for all targets including the sims. Perform lockout of audio callback when changing states. Weird new playback or recording trouble? Check before and after this revision first though things seem quite sound.
2007-10-06 22:27:27 +00:00
pcm_sampr.h
e200: Add recording. Just from MIC right now and FM integration will happen soon. Most every bit of weirdness is nescessary and no problems seem to exist that the retailos doesn't exhibit too (namely noise when LCD is on when recording from MIC).
2007-06-05 07:03:30 +00:00
pnx0101.h
PNX0101: new register names and polishing support for Clock Generation Unit
2007-09-20 22:13:48 +00:00
power.h
e200/c200: Take advantage of mutex recursion for the tuner driver and dump the awkward *_nolock stuff.
2007-11-05 07:01:32 +00:00
powermgmt.h
Accept FS#8139 - Correct assumed current consumption for iPod Video
2007-11-14 07:39:46 +00:00
pp5002.h
Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.
2007-11-27 01:20:26 +00:00
pp5020.h
New USB stack
2007-11-22 20:51:00 +00:00
pp5024.h
The GPIO interrupts are split into several port groups on all PP502x versions, so move those definitions into pp5020.h, and add the missing group. Make microSD hotswap detection work on Sansa c200. Note that microSD access itself does not work yet.
2007-11-04 13:22:17 +00:00
profile.h
replaygain.h
Small ReplayGain cleanup. Move RVA2 specific code to id3.c and don't do the parsing via strings. Generalize parts of the code for later use by MPC. Make some local functions static. Add and update some comments for clarity.
2007-08-25 10:25:13 +00:00
rolo.h
rtc.h
Try and save some bytes, seeing as we already assumed LANG_ constants for month and weekday names are contiguous.
2007-10-24 15:34:36 +00:00
s1a0903x01.h
Fix all the red this time?
2007-07-14 13:41:59 +00:00
s3c2440.h
Fix the FRAME offset calculation on Gigabeat (m:robe 500 too?).
2007-10-23 11:34:11 +00:00
scroll_engine.h
Add viewport capabilities to all the LCD drivers, and adapt scrolling code. This is the firmware/ part of FS#8385 - the changes to the WPS code still need more work and will be committed at a later date. NOTE: There are no user-visible changes with this commit - just the infrastructure.
2008-01-07 20:34:11 +00:00
serial.h
sh7034.h
sound.h
Commit FS#7440. The iPod Video doesn't actually have a hardware equalizer. It does have hardware bass/treble settings with configurable cutoff. So make the bass/treble settings use the hardware and remove the hardware equalizer configuration.
2007-11-24 07:51:00 +00:00
spdif.h
Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first.
2007-06-08 23:42:04 +00:00
spi.h
spi is shared between the rtc and tsc2100
2007-10-01 05:27:43 +00:00
structec.h
sw_i2c.h
system.h
mpegplayer: Make playback engine fully seekable and frame-accurate and split into logical parts. Be sure to have all current features work. Actual UI for seeking will be added soon. Recommended GOP size is about 15-30 frames depending on target or seeking can be slow with really long GOPs (nature of MPEG video). More refined encoding recommendations for a particular player should be posted soon.
2007-12-29 19:46:35 +00:00
tcc77x.h
Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc.
2007-10-28 11:08:10 +00:00
tcc780x.h
Initial Cowon D2 commit:
2008-01-14 22:04:48 +00:00
tea5767.h
Do some planned radio interface cleanup since adding in the LV24020LP.
2007-07-14 11:20:31 +00:00
thread.h
mpegplayer: Make playback engine fully seekable and frame-accurate and split into logical parts. Be sure to have all current features work. Actual UI for seeking will be added soon. Recommended GOP size is about 15-30 frames depending on target or seeking can be slow with really long GOPs (nature of MPEG video). More refined encoding recommendations for a particular player should be posted soon.
2007-12-29 19:46:35 +00:00
timer.h
Initial Cowon D2 commit:
2008-01-14 22:04:48 +00:00
tlv320.h
get rid of audiohw_reset
2007-11-20 10:28:53 +00:00
tsc2100.h
Add some TSC2101 register definitions.
2007-11-20 05:13:07 +00:00
tuner.h
Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.
2007-08-14 22:06:23 +00:00
uda1380.h
get rid of audiohw_reset
2007-11-20 10:28:53 +00:00
usb.h
Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do.
2008-01-09 07:24:43 +00:00
usb_ch9.h
add some informations about this file
2007-10-28 14:02:51 +00:00
usb_core.h
Re-added USB charger detection and auto reboot on host connect.
2007-11-23 15:02:26 +00:00
usb_drv.h
Added some error returns
2007-11-27 13:42:47 +00:00
usb_serial.h
wm8721.h
get rid of audiohw_reset
2007-11-20 10:28:53 +00:00
wm8731.h
get rid of audiohw_reset
2007-11-20 10:28:53 +00:00
wm8751.h
remove not used dummy code
2007-11-22 23:24:24 +00:00
wm8758.h
Commit FS#7440. The iPod Video doesn't actually have a hardware equalizer. It does have hardware bass/treble settings with configurable cutoff. So make the bass/treble settings use the hardware and remove the hardware equalizer configuration.
2007-11-24 07:51:00 +00:00
wm8975.h
remove not used dummy code
2007-11-22 23:24:24 +00:00
wm8985.h
Initial Cowon D2 commit:
2008-01-14 22:04:48 +00:00
wmcodec.h
fix red
2007-06-13 06:41:27 +00:00
47ea030e2e